*Needle cover is missing. A rare Technics T4P cartridge that uses a pure boron tapered pipe cantilever. It has a smooth, silky sound without distortion typical of the company (Murakoshi Yoichi)
Maintenance information: 2026.9.5 sound output confirmed
Accessories: manual, original box
Main specifications: output voltage 2.5 mV needle pressure 1.0 to 1.5 g dead weight 6 g
*Needle cover is missing. A limited-edition model that uses a composite ultra-fine wire made of pure gold and 6N copper for the power generation coil to achieve an analog sound that plays pure and rich musical emotions. The amount of information unique to a spacious high-end aircraft is truly a word (Murakoshi Yoichi)
Maintenance information: 2026.9.5 sound output confirmed
Accessories: none
Main specifications: MC type output voltage 0.15 mV playback frequency 20 Hz to 70 kHz impedance 40 ohms special elliptical needle needle pressure 1.3 g dead weight 7 g
The higher model of the DL-103. Wide range has been measured, and 20 Hz to 70 kHz has been achieved. Delicate, wide, and powerful sound quality. Serial 3948 (Murakoshi Yoichi)
Maintenance information: 2026.9.9 sound output confirmed
Accessories: needle cover
Main specifications: MC type output 0.2 mV playback frequency 20 to 70,000 Hz impedance 40 ohms needle pressure 1.2 g dead weight 6.5 g
※There is no problem with operation, but since the cantilever is curved, it is sold at a low price. DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. Serial 9342 (Yamato Yuki)
Maintenance information: 2026.8.20 sound output confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
The price has been drastically reduced. 2026/8/11 sales price 99,800 yen Maintained! An improved model of the TSD-15 for consumer use. The low and high frequencies are just the right amount, and the density and extrusion of the midrange is amazing. The cantilever bending has been corrected, but there is still some bending left. Serial 2983 (Fujisawa Yukishi)
Maintenance information: 2026.8.11 Maintained (broken coil winding, cantilever bending, damper replacement, cleaning)
Accessories: No accessories
Main specifications: MC type 1 mV single crystal diamond super fine line stylus needle pressure 2.0 to 2.5 g impedance 20 ohms dead weight 12.0 g
The price has been reduced. 2026/9/9 sales price 178,000 yen A photoelectric cartridge that inherits the lineage of the company's flagship model Grand Master. What you feel right after listening is the overwhelming sense of resolution and transparency. The output is also higher than the predecessor model, and the sound quality is not inferior to the flagship model, and the cost performance is excellent. *A dedicated optical equalizer is required for playback. The needle cover is included, but the fixing part is missing and cannot be fixed (Takasaki Atsushi)
Maintenance information: 2026.9.5 sound output confirmed
Accessories: case, needle cover (fixing part is missing)
Main specifications: photoelectric type 7.7g output voltage 70mV (1kHz) aluminum cantilever needle pressure 2.0-2.2g line contact needle
The company's flagship model photoelectric cartridge. Starting with a second-generation vibration system, the adoption of diamond cantilevers, left and right independent LEDs, and independent photo detectors has achieved an overwhelming sense of silence and wide dynamic range. The spatial expression that makes you feel like you are at a concert is attractive. There is a slight peeling on the protective sheet on the pole piece cover side. Serial 2026049 (Murakoshi Yoichi)
Maintenance information: 2026.9.5 sound output confirmed
Accessories: needle cover, case
Main specifications: photoelectric type, 70 mV, needle pressure 2.0 g to 2.2 g, dead weight 7.7 g
Stanton MI Cartridges It is sold as a broadcast standard, and its strong, bold sound is attractive (Murakoshi Yoichi)
Maintenance information: 2026.9.5 sound output confirmed
Accessories: needle cover
Main specifications: MI needle pressure 1.5 to 3 g output voltage 5 mV oval needle weight 5 g
A mono cartridge with a traditional 33 series body. Play mono records clearly with horizontal pickup only. It has vertical compliance and is optimized for reoccurring mono discs in the stereo era. You can feel that the range is wider than Denon's DL-102 (Asaine Tomo)
Maintenance information: 2026.9.6 sound output confirmed
Accessories: needle cover instruction manual
Main specifications: MC type needle pressure 2.3 to 2.7 g (2.5 g standard) Muku round needle high hardness duralumin cantilever PCOCC coil anti-vibration rubber “Honeynight” impedance 10 Ω 6.9 g
*Needle cover is missing. MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. The sound is familiar with a wide range. There is dullness. Serial 3411 (Tamura Eiji)
Maintenance information: 2026.9.9 sound output confirmed
Accessories: none
Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
※There is no operation problem, but the cantilever is bent and the needle tip is bent. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend it to a variety of people, from analog beginners to audiophiles (Daiki Goto)
Maintenance information: 2026.9.9 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
*Needle cover is missing. Surprisingly few cartridges are in stock! The MC10 20 30 series has been the main product of orthophones since the latter half of the 1970s. The MC10 Super2 is the 4th generation introduced in 1988. This is an introductory machine around the time when styluses, etc. were improved, and upgrades to MC type cartridges in general began along with the reduction of records. There are no bends. Serial 016228 (Tamura Eiji)
Maintenance information: 2026.9.9 sound output confirmed
Accessories: needle cover
Main specifications: MC type impedance 3 ohms output voltage 0.2 mV needle pressure 1.8 g dead weight 10 g
A standard model that uses a bonded elliptical needle that draws out accurate information. It has a high output of 4.0 mV and uses an aluminum pipe cantilever. The sound is sharp. (TAMURA Eiji)
Maintenance information: 2026.9.9 sound output confirmed
Accessories: needle cover
Main specifications: VM type playback frequency range 20 to 22,000 Hz output voltage 4.0 mV needle pressure 1.8 to 2.2 g (2.0 g standard) 6.1 g
Scarce! Pickering low impedance cartridges. It's MM, but a boost is required. This cartridge has a sharp, bright, and sharp American sound, and is recommended for jazz. No bending, good damper (Kanai Hidetsugu)
Main specifications: mm type output 0.3 mV playback frequency 20 to 50,000 Hz needle pressure 0.75 to 1.5 g dead weight 5.5 g
Popular MI (MM) type cartridges. The warm and glossy mid-range is attractive. This model has a reputation among those who like rock and pop music. The exterior shows a sense of use over time (Matsumoto Tsuyoshi)
Maintenance information: 2026.9.8 sound output confirmed
Accessories: none
Main specifications: MI type frequency band 5 to 35000 Hz output 5.0 mV needle pressure 0.5 to 1.5 g
Gold1 is a cartridge selected from Silver1 that has undergone strict inspection by GRADO. A newly designed coil design has been adopted, and the entire unit has achieved 17% weight reduction compared to the previous model, and operation performance has improved dramatically (Kanai Hidetsugu)
Maintenance information: 2026.9.5 operation confirmed. The stylus cover is missing.
Accessories: None ※ stylus cover missing
Main specifications: output 5 mV, compatible load, 47 kΩ, output resistance, 475 Ω, frequency characteristics, 10 to 60000 Hz, suitable needle pressure, 1.5 g, dead weight 5.5 g
※The stylus cover is missing. First model in Empire's classic 4000D series. Supported by powerful, sharp mid-low frequencies, the deep and thick sound is perfect for JAZZ. Dullness and feeling of use (Kanai Hidetsugu)
Maintenance information: 2026.9.5 operation confirmed. The stylus cover is missing.
Accessories: none
Main specifications: Mi type output 3 mV needle tip 0.1 mil tracing radius proper needle pressure 1 to 1.75 g load resistance 47 kΩ dead weight 7.3 g
Low compliance cartridge that matches even arms with heavy needle pressure. If you use an arm with good followability, you can enjoy a surprising amount of information and a thick, sharp sound (Hiura Katsuji)
Maintenance information: 2026.9.5 sound output confirmed
Accessories: none
Main specifications: output voltage 5 mV needle pressure 1.5 to 3.0 g
The disposal price has been reduced! (Member prices are not applicable) 2026/8/25 sales price 20,000 yen A cartridge that uses a solid microlinear needle with an unchanged radius of curvature at the needle tip to achieve low distortion. You can feel the depth of analog playback with clear sound images, positioning, and colorful tones. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2026.8.25 Operation confirmed
Accessories: instruction manual
Main specifications: VM type playback frequency range 20 to 27,000 Hz output voltage 4.0 mV needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 2.7 kΩ load resistance 47 kΩ dead weight 6.4 g
This is an Audio-Technica MC cartridge with replaceable needles. Although it was sold by many other manufacturers as an OEM product, it is an original. The exterior has a feeling of use such as dullness (Matsumoto Tsuyoshi)
Maintenance information: 2026.8.20 sound output confirmed
Accessories: none
Main specifications: output 1.5 mV frequency characteristics 10 Hz to 30,000 Hz standard needle pressure 1.7 g
The price has been drastically reduced! 2026/8/30 sales price 12,000 yen Grace MM type cartridge. The C-model of the F-8 series, which is tuned for classics, is attached to the needle tip. The sound is glossy, powerful, and somewhat nostalgic. There is a slight feeling of use with the stylus and cantilever, but they are generally good. Serial 3186 (Yamato Yuki)
Maintenance information: z2026.8.30 operation confirmed
Accessories: none
Main specifications: MM type 7mV 0.5 to 2.5 g 10 to 35,000 Hz dead weight 6.5 g
The price has been drastically reduced! 2026/8/21 sales price 6,000 yen Victor's classic mm cartridge. The sound makes you feel a unique sense of nostalgia. It's not delicate or precise, but it adds a good old atmosphere to the sound source. The replacement needles are made by Tokyo Jewel. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.8.21 operation confirmed
Accessories: none
Main specifications: output 3 mV needle pressure 1.5 to 2.0 g dead weight 6 g
Good stylus and cantilever! It hasn't arrived in a long time. A rare micro cartridge. The effective mass of the vibrating body is reduced by combining a beryllium cantilever with a lightweight, compact magnet, and its own weight is only 4.9 g. It has a bright tone and seems to be easy to use. (FUJISAWA KOSHI)
Maintenance information: 2026.9.5 operation confirmed
Accessories: needle cover
Main specifications: mm type oval beryllium cantilever needle pressure 1.0 to 1.6 g
First model in Empire's classic 4000D series. Supported by powerful, sharp mid-low frequencies, the deep and thick sound is perfect for JAZZ. Dullness and oxidation of the body can be seen. (FUJISAWA KOSHI)
Maintenance information: 2026.9.5 operation confirmed
Accessories: No accessories
Main specifications: Mi type output 3 mV needle tip 0.1 mil tracing radius proper needle pressure 1 to 1.75 g load resistance 47 kΩ dead weight 7.3 g
The needle tip is good! Audio-Technica's standard cartridge. The wide range, clear, and uncharacteristic sound is attractive. (FUJISAWA KOSHI)
Maintenance information: 2026.9.5 operation confirmed
Accessories: No accessories
Main specifications: VM type 4 mV frequency characteristics 10 to 20,000 Hz needle pressure 1.0 to 2.0 g (1.5 g standard) dead weight 6 g
The disposal price has been reduced! (Member prices are not applicable) 2024/4/7 sales price 2,000 yen ※ Since there is no main unit, operation has not been checked. Nagaoka replacement needles. This is a TRIO N-39 compatible product. As for the exterior, the needle tip is slightly to the left (Hiroki Aso)
Maintenance information: 2024.4.7 operation unchecked
Accessories: none
Main specifications: Appropriate needle pressure 1.5g
※Bonded finger marks are attached to the shell. A reprinted model of SPU-GE. This is a popular oval needle type. It has a rich texture, a thick outline, a rich texture and thick outline that sets it apart from other cartridges. The cantilever is dull (Daiki Goto)
Maintenance information: 2026.8.27 operation confirmed
Accessories: needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
※Since the emblem is attached by rotating 90 degrees, it is inexpensive. SPU-GE reprint model. This is a popular oval needle type. It has a rich texture, a thick outline, a rich texture and thick outline that sets it apart from other cartridges. The cantilever is dull. (GOTO Daiki)
Maintenance information: 2026.8.28 Operation confirmed
Accessories: needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
*The stylus appears to be an external product. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior has a feeling of use such as dullness and small scratches. (TAKAHASHI Nobuyuki)
Maintenance information: 2026.8.25 Operation confirmed
Accessories: none
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
Unspecified MM cartridges. The cantilever is slightly closer (Oikawa Tetsuji)
Maintenance information: 2026.8.24 Operation confirmed
Accessories: none
Main specifications: dead weight 4.3 g