※Since there are many cracks on the surface, this is an inexpensive MICRO rubber heavyweight turntable sheet. Tight and accurate sound images can be obtained thanks to high weight (Kojima Yosuke)
Accessories: none
Main specifications: Taper finish Diameter: approx. 302 mm Thickness: approx. 5 mm Weight: 700 g
It is an exquisitely crafted enclosure similar to JBL's EC-138. The size and compatible units remain the same, but exterior corner specifications and sound absorbing materials are different from the original. The construction itself is well-built, perfect for those who like to make their own. There are scratches and bumps on the exterior. (TAMURA Eiji)
Accessories: saran net, MA-15 (8 pieces)
Main specifications: W555 × H845 × D430 mm
Set of 8 unspecified brick blocks A metal plate with a thickness of about 3 mm is attached to the top surface (there are variations in diameter). Please note that there are slight differences in individual dimensions (Eternity Miraito)
Accessories: none
Main specifications: Dimensions: W100 to 105 x H60 to 63 x D100 to 105 mm Diameter of the metal part: about 40 to 60 mm Weight: about 1.3 kg/piece
Unspecified speaker stand. Perfect for medium bookshelves. There are wounds and dullness (Daiki Goto)
Accessories: none
Main specifications: Dimensions: W350 x H180 x D270 mm Weight: 1.9 kg/piece
Unspecified set of 7 stone insulators The back side is a cork surface about 1 mm thick. There is a crack in 1 card (Eternity Miraito)
Accessories: none
Main Specifications: Diameter: 93 mm Thickness: 6 mm Weight: 98 g/sheet
Unspecified silver shell. It seems to be compatible with a wide variety of cartridges. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.17 continuity confirmed
Accessories: none
Main specifications: dead weight 10.3 g
The price has been drastically reduced. 2025/12/3 sales price 8,000 yen. ※The exterior is all wrapped with butyl rubber, etc., so there is a strong feeling of use, and it is inexpensive. Set of 10 unspecified lead ingots If you were looking for one, please take this opportunity (Kobayashi Hitoshi)
Accessories: none
Main specifications: W295 x H20 x D45 mm 2.42 kg (actual measurement)
The price has been reduced. 2025/11/20 sales price 4,000 yen. Set of 4 unspecified speaker blocks It is recommended for users of NS-1000M, 4312, etc. You can see the exterior, peeling of the veneer, sticking marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W90 x H178 x D320 mm 3.5 kg (actual measurement)
The price has been reduced. 2025/11/20 sales price 4,000 yen. Set of 4 unspecified speaker blocks It is recommended for users of NS-1000M, 4312, etc. You can see the exterior, peeling of the veneer, sticking marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W90 x H178 x D320 mm 3.5 kg (actual measurement)
The price has been drastically reduced. 2025/11/26 sales price 20,000 yen. Unspecified 5-tier rack. The height of the shelf can be adjusted by changing the dowel position. If you've been looking for this size, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: load capacity unknown W610 × H930 × D573 mm 49.4 kg (actual measurement)
The price has been reduced. 2025/11/29 sales price 40,000 yen 614D type enclosure. Details are unknown. The previous owner had mounted a 414-8B. There is an electric sticker on the back. If you've been looking for this size, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W520×H615×D390mm 22kg
Unspecified stand. The top plate is small, so I think it's for small satellite speakers. There are small dullness scars (Sasaki Shota)
Accessories: none
Main specifications: top plate W110 x D125 mm bottom diameter 295 mm height 815 mm
Unspecified enclosure for 12 cm. It is inexpensive because there are many screw holes crushed and scratched. A terminal is attached to the back (Sasaki Shota)
Accessories: none
Main specifications: W150×H250×D180mm
Unspecified set of 4 banana plugs. It is easy to connect to the speaker cable and does not take much time to set up. If you are looking for one, please take this opportunity. (FUJISAWA KOSHI)
Accessories: No accessories
Unspecified head shell. It is lightweight and seems to be compatible with light needle pressure cartridges. (FUJISAWA KOSHI)
Maintenance information: 2025.12.13 continuity confirmed
Accessories: No accessories
Main specifications: dead weight 9g (actual measurement)
The price has been drastically reduced. 2025/11/30 sales price 2,000 yen. A cylindrical magnesium insulator with unknown details. It has an unobtrusive sound and is effective under an amplifier or CD player. A rubber sheet is attached to the bottom, and a feeling of use can be seen on the exterior, such as dullness, scratches, marks, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W40 x H14 mm 34.7 g (actual measurement)
Unspecified silver shell. If you are looking for one, by all means (Daiki Goto)
Maintenance information: 2025.12.11 continuity confirmed
Accessories: none
Main specifications: dead weight 11.8 g (actual measurement)
Unspecified set of 3 metal insulators Felt with a thickness of about 1 mm is attached to the front and back (permanent future)
Accessories: none
Main specifications: Dimensions: W40 x H20 x D40 mm Weight: 100 g/piece
Unspecified set of spikes and spike receivers. The material and color differ depending on the spike and spike receiver. The exterior is dull, dirty, etc. (Ryo Mizusaki)
Accessories: none
Main specifications: spike dimensions: height: 20 mm, diameter: 25 mm, spike receiving dimensions: diameter: 27 mm, thickness: 5 mm
The disposal price has been reduced! Member prices are not applicable. 2025/10/7 sales price 5,000 yen self-made 2-way enclosure. You can easily enjoy making speakers by combining them with your favorite unit. There are small scratches and chips. *Speaker terminals are not included. (FUJISAWA KOSHI)
Accessories: saran net
Main specifications: plate thickness 1.5 cm opening diameter 6.12 cm W175 x H280 x D165 mm 1.7 kg
Set of 4 unspecified wood blocks. How about using it as an insulator (Permanent Miraito)
Accessories: none
Main specifications: W180 x H90 x D320 mm Weight: 3.4 kg/piece
Unspecified metal insulator 3-pair set. Used as a set of spikes and spike receivers. I think it fits small devices (Takahashi Nobuyuki)
Main specifications: spike diameter 20 x height 12 mm, receiving diameter 20 x 5 mm (both measured)
Unspecified stone boards, pair. Only the surface is mirrored. There is a corner gap in 1 place (Oikawa Tetsuji)
Accessories: none
Main specifications: W400×H15×D400mm Weight 5.7 kg
※The exterior is all wrapped with butyl rubber, etc., so there is a strong feeling of use, and it is inexpensive. Set of 4 unspecified lead ingots If you've been looking for one, take this opportunity. (KOBAYASHI Hitoshi)
Accessories: none
Main specifications: W150 x H20 x D50 mm 1.36 kg
The disposal price has been reduced! Member prices are not applicable. 2025/8/13 sales price 8,000 yen mono speaker from unknown manufacturer. The range is narrow, but the sound is narrow and moist. There are bumps and scratches on the exterior (Tamura Eiji)
Maintenance information: 2025.8.13 sweep check OK
Accessories: No accessories
Main specifications: W370 x H300 x D160 mm weight 2.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/7/18 sales price 8,000 yen This is a record player cabinet from an unknown manufacturer. The hole size is 353 mm wide and 323 mm deep. You must drill the arm holes yourself. There are many scratches and screw marks on the exterior. (TAMURA Eiji)
Accessories: No accessories
Main specifications: W520×H260×D421mm
The disposal price has been reduced! (Member prices are not applicable) 2023/9/28 sales price 5,000 yen Wood cabinet for TD-124 from unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: No accessories
Main specifications: W597 ✕ H160 ✕ D445 mm Weight 3.9 kg
The price has been drastically reduced. 2025/11/19 sales price 20,000 yen. Unspecified backload horn enclosure. If you're looking for this size, take this opportunity. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: unit caliber 185 mm W321 x H898 x D450 mm 20.5 kg
The price has been reduced! 2025/10/16 sales price 18,000 yen It's for the SX-8000 /2, but there is a hole so that it can also be used for 1500/5000 etc. The arm hole diameter will be 41 mm. (TAMURA Eiji)
Accessories: No accessories
Main specifications: dead weight 1.1 kg