※There is no problem with operation, but it is currently sold because it is cheap. Compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input. Perfect as an introductory machine (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: power cable, original box
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
The price has been reduced. 2024/4/24 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. The main unit is in good condition, but it is written in the instruction manual (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
The price has been drastically reduced! 2024/4/27 sales price 178,000 yen rare item. Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 Inspection operation confirmed (when MC is input at 1 GΩ, ① knock down dip switch No. 2 No. 5 to the front side. It can be used by ② tilting the DIP Switch No. 1 and 6 to the front side ③ and inserting the short pin into the MM terminal). (MC input setting for current 330 ohm load) Operation was tested with each function for internal inspection of the main unit and power supply unit.)
Accessories: power supply unit, copy of instruction manual
Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg
Phono equalizer developed for the SHURE V15 series. Sound loss is good, and the medium sound is solid. Perfect for jazz from the late 60's to 70's. There are small scratches, dullness, etc. on the exterior. Serial 870900123 (Tomonori Asaine)
Maintenance information: 2024.4.27 Operation confirmed
Main specifications: 120V specification PHONO-FLAT-TAPE switching W145 x D105 x H65 mm
German MM/MC compatible phono equalizer. The speed of sound is outstanding. The sound quality is straight without turbidity, and the volume and power of the bass are excellent, and the rhythm band can be heard richly. It's an excellent product that also allows you to get good MC gain. There is an MM/MC changeover switch on the bottom, making it very easy to use. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual
Main specifications: 60dB (MC) 40dB (MM) input impedance 800Ω/MC, 47kΩ/mm W50 ✕ H30 ✕ D74mm 0.2 kg
※It has a cigarette smell, so it's cheap. Maintained! Modular phono equalizer for vacuum tube circuits. The Phono Module, a phono preamp with MC input using a head amplifier instead of a transformer, combines both a vacuum tube and a solid state device, so you can hear a very fine, supple, and stable sound. The exterior has scratches on the volume and top plate. Serial 3105993 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (power supply part rubber foot mounting vacuum tube pin cleaning volume cleaning connector part screw tightened. Audio check for each input/output ※It takes about 2 minutes for the sound to come out after the power is turned on → warm-up is complete. Also, when switching functions, a mute operation of about 15 seconds intervenes. Note: The XLR output is a variable output, so the volume is effective, but the RCA output is fixed. (not via volume)
Accessories: power cable
Main specifications: Vacuum tube used ECC83 x 1, ECC81 x 1, ECC88 x 1 Phono (MM, MC) LINE main body W437 x H80 x D390 mm weight 7.62 kg power supply unit W100 x H77 x D230 mm weight 4 kg
A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
*6-month warranty Triode MM/MC compatible phono equalizer. You can easily enjoy records even with an amplifier that does not have a PHONO input. It's slightly dull (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: instruction manual, power cable
Main specifications: semiconductor circuit input impedance mm47kΩ/mc2Ω to 47Ω compatible gain mm36dB/mc55dB W90 x H100 x D230 mm 1.6 kg