A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
The price has been reduced. 2020/4/17 Selling price 5,000 yen Unspecified wooden front baffle. If you are a self-made group, come on. There are scratches and stains scattered, uneven painting, corner chips, etc. (Takasaki Atsushi)
Accessories: none
Main specifications: opening diameter 280 mm bass reflex opening W292 × H80 mm W400 × H610 × D20 mm 1.8 kg/sheet
Disposal price reduction. 2012/4/2 sales price 10,000 yen Self-made arm board for TD-124 There is an arm hole for the SME3012R The hole is angled in consideration of the escape path of the arm cable W150 x H12 x D400 mm (actual measurement) (Kojima Yosuke)
Accessories: no accessories
Self-made cabinet for GARRARD 301 with double arm specifications. The 3012 Series 2 and SMG-212 were mounted on the tone arm installation port. You can see the appearance, peeling veneer, abrasions, bruises, etc., and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W760 x H265 x D520 mm 14.4 kg (actual measurement)
A large self-made audio board with a sturdy wooden board sandwiched between a floor mat and felt. It was created by the previous owner for TANNOY Westminster. As for the exterior, there is a feeling of use such as scratches on the bottom (Tamai Jun)
Accessories: none
Main specifications: size W1040 x D700 x H23 mm weight 8.0 kg
Variable Resistor Attenuator Bridge T Type 21 Steps Maximum Attenuation 50 dB Impedance 600 Ohms W45 x 64 mm 140 g with Volume Knob (Kojima Yosuke)
Accessories: volume knob (attached to the main unit)
Set of 4 Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. Bits and scratches can be seen. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W70×D70×H35mm
Set of 4 Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. Bits and scratches can be seen. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W70×D70×H35mm
The disposal price has been reduced. Member discounts are not applicable. 2024/4/17 sales price 6,000 yen. This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch outer circumference 370 mm, inner circumference 293 mm caliber 270 mm external dimensions W356 x H365 x D10 mm approx. 0.4 kg (1 piece)
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
This is a wooden board from an unknown manufacturer. The construction itself is solid, and it is recommended as a base for speakers, etc. The exterior has dirt, stain marks, spike marks, and line scratches.
Accessories: none
Main specifications: W580×H40×D465mm
The disposal price has been reduced. Member discounts are not applicable. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Unspecified speaker stand. The struts are filled with sand, which can be expected to have a damping effect. There is a noticeable scratch on the pillar (Daiki Goto)
Accessories: none
Main specifications: W255 x H470 x D305 mm top plate 180 x 205 mm weight 8.1 kg (actual measurement)
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
Disposal price reduction. 2023/8/13 Wood cabinet with an unknown selling price of 10,000 yen. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm, weight 1.8 kg (actual measurement)
The price has been reduced! 2025/3/4 sales price 12,000 yen This is a phase plug for the B&W 800 series. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: dead weight approx. 260 g (actual measurement) /piece
Unspecified speaker stand. The wood grain has a natural feel. There is a feeling of use such as peeling veneer (Daiki Goto)
Accessories: none
Main specifications: W32 x 120H x D235 mm, weight 1.9 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
The price has been reduced. 2025/4/29 sales price 28,000 yen. Heavyweight, sturdy speaker stand. It is equipped with a damper used in TAOC stands, but the manufacturer and model number are unknown. There is a spike at the foot, but the spike holder is not included. If you're looking for this size, take this opportunity. Exterior, paint peeling, rust, dullness, scuffs, etc. can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate W172 x D284 mm (actual measurement) main body W290 x H595 x D400 mm 40 kg (actual measurement)
*One jumper plate is missing. 1 pair of unspecified speaker terminals If you've been looking for one, please take this opportunity. Exterior, other than those described above, is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W137 x H81 x D105 mm 112 g (actual measurement)