※ Because it is in poor condition, it is cheap and is sold as is. A tall boy speaker system developed as a speaker for home theaters. This is an advanced 5.1 channel speaker system with a real wood veneer finish. It can also be easily used for audio. In addition to the exterior, peeling veneer, and screw holes in the pedestal, you can see a feeling of use such as dullness, scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.2.22 Operation confirmed
Accessories: saran net
Main specifications: 2-way bass reflex anti-magnetic design 12 cm woofer x 2/2.5 cm tweeter frequency band 38 Hz to 40 kHz crossover 3 kHz impedance 6 ohms maximum input 120 W sound pressure level 86 dB dimensions W195 x H930 x D 295 mm weight 12 kg
※ Because it is in poor condition, it is cheap and is sold as is. A tall boy speaker system developed as a speaker for home theaters. This is an advanced 5.1 channel speaker system with a real wood veneer finish. It can also be easily used for audio. Both exterior and TW are dented, veneer peeling, and in addition to screw holes in the pedestal, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.2.22 Operation confirmed
Accessories: saran net
Main specifications: 2-way bass reflex anti-magnetic design 12 cm woofer x 2/2.5 cm tweeter frequency band 38 Hz to 40 kHz crossover 3 kHz impedance 6 ohms maximum input 120 W sound pressure level 86 dB dimensions W195 x H930 x D 295 mm weight 12 kg
The disposal price has been reduced! Member prices are not applicable. 2026/2/11 sales price 99,800 yen It faithfully reproduces the design philosophy of AUDIO SPACE's LS3/5A BBC monitor. The same model, such as ROGERS, is expensive and is recommended for those who have stepped on their feet. There are dents, scratches, and dirt all over the exterior. Also, there are chips in the corners. Serial K13110034A, K13110034B (Fujisawa Yukishi)
Maintenance information: 2026.2.11 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers sealed bookshelf impedance 11Ω frequency band 70Hz to 20kHz sound pressure level 82.5 dB W190 x H305 x D165 mm 4.9 kg
This is a selector for switching between both the input and output signal lines of audio devices. Both the input and output of the 3-RCA pin system can be switched independently. It can be combined in 9 ways, and is a must-have item for those with many amplifiers. There are no visible scratches on the exterior, etc., and it is good with just the degree of dullness (Kobayashi Hitoshi)
Maintenance information: 2026.2.19 Operation confirmed
Accessories: none
Main specifications: gold-plated machined brass, 3 RCA pins, 3 input systems, 3 output systems, W280 x H90 x D220 mm, 2.3 kg
A sealed subwoofer designed specifically for Hi-Fi with Hi-Res audio playback in mind. Adopts a convertible structure that allows you to change whether the baffle surface is facing forward or downward. The compact design that can be placed anywhere is also attractive. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.2.19 Operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: amplifier maximum output 91 W rated output 72 W (8 ohms) W270 x H300 x D300 mm 9.6 kg
*Set of 3. Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. It is a safe design that prevents slipping even with light equipment (Oikawa Tetsuji)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
The disposal price has been reduced. Member prices are not applicable. 2021/9/21 sales price 99,800 yen with casters. Hayami's 5-tier horizontal audio rack with 3 additional tiers of the GT-9731. A style that sticks to standards and is faithful to the basics. The design combines functionality with a sense of luxury. There is a feeling of use on the exterior due to many damage, stains, stains, etc. There is glitch due to damage to the dowels on the side plate and partition board, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with casters KP-4CT (2 sets)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
The disposal price has been reduced. Member prices are not applicable. 2024/10/16 sales price 99,800 yen with casters. Hayami's 5-tier horizontal audio rack with 3 additional tiers of GT-9731. A style that sticks to standards and is faithful to the basics. The design combines functionality with a sense of luxury. There is a feeling of use on the exterior due to many damage, stains, stains, etc. There is glitch due to damage to the dowels on the side plate and partition board, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
The disposal price has been reduced. Member prices are not applicable. 2021/9/22 sales price 99,800 yen This is Hayami's 5-tier horizontal audio rack with 3 tiers added to the GT-9731. A style that sticks to standards and is faithful to the basics. The design combines functionality with a sense of luxury. There is a feeling of use on the exterior due to many damage, stains, stains, etc. There is glitch due to damage to the dowels on the side plate and partition board, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The disposal price has been reduced. Member prices are not applicable. 2021/9/23 sales price 99,800 yen This is Hayami's 5-tier horizontal audio rack with 3 tiers added to the GT-9731. A style that sticks to standards and is faithful to the basics. The design combines functionality with a sense of luxury. There is a feeling of use on the exterior due to many damage, stains, stains, etc. There is glitch due to damage to the dowels on the side plate and partition board, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
※Shipping service. Publisher: Stereo Sound. The Hi-Fi industry has made a mistake. So many Hi-Fi devices have abandoned aiming for high sound quality, and they have come to aim for themselves.” — I can say that the sound the system plays is not designed by an audio manufacturer
Scottish audio brand Lynne. A visual picture scroll showing that philosophy. Since the photograph is a sample, the actual product may be broken or there may be markings etc.
※Shipping service. Special Issue No. 134 = Sound System Design in the Super CD & Multi-channel Audio Era, Immortal Analog/Power Basic Course, Detailed Report by Claire MRS (with test tables for each company's subwoofers) /Revell Audio Visit Diary, published on 2000.7.15. Since the photograph is a sample, the actual item may be broken or have markings etc.