The price has been reduced. 2022/12/25 sales price 13,000 yen This is a top plate for ADK's popular series SD (probably RO) series. How about replacing an audio board or splitting the rack you currently have? There are many deep scratches on the side of the top surface, and abrasions all over the pole attachment and bottom. ※4 mounting screws are missing (Murakoshi Yoichi)
Accessories: none
Main specifications: W620 x H40 x D556 mm
The disposal price has been reduced! (Member discounts are not applicable) 2022 8/12 Sales price 20,000 yen ※ It is inexpensive because the shelf board is out of stock. Yamaha GT rack with high rigidity and excellent earthquake resistance. The main unit is 50 mm thick particle board, which firmly supports even heavyweight amplifiers. There are small scratches, rubbing, etc. on the whole. (Hiroki Aso)
Accessories: none
Main specifications: body plate thickness 50 mm W580 × H440 × D440 mm weight 27.0 kg (measured value)
The price has been reduced! 2022/2/15 Sales price 19,800 yen ONKYO's audio rack. It is relatively well made, and the height can be adjusted by changing the position of the dowel only in the middle stage. The appearance has a feeling of use such as dullness and Rubbed scratches. The top plate is made of glass. * The dowels that fix the shelf board are general-purpose products. (Asa Tomoho)
Accessories: None
Main specifications: W570mm × H580mm × D510mm from the top between the shelves 105, 120, 120, 140 mm (center shelf board is adjustable) Inner depth 440mm Weight 17kg
The disposal price has been reduced! (Member discounts are not applicable) 2022 8/12 Sales price 20,000 yen ※ It is inexpensive because the shelf board is out of stock. Yamaha GT rack with high rigidity and excellent earthquake resistance. The main unit is 50 mm thick particle board, which firmly supports even heavyweight amplifiers. There are small scratches, rubbing, etc. on the whole. (Hiroki Aso)
Accessories: none
Main specifications: body plate thickness 50 mm W580 × H440 × D440 mm weight 27.0 kg (measured value)
Sony EIA rack with glass door,casters and 2 oiginal shelf boards. No rear bord. Generally good condition. Outside:W570×D595×H1,256mm Inside:H1,111×D465mm
ADK's STC series rack unit. There are no dowels for stacks, but stacks themselves are possible. On the exterior, there are scratches, scuffs, and some paint has faded. (MIURA Kimiya)
Accessories: no accessories
Main specifications: load capacity 100 kg assembly dimensions W574 x H205 x D500 mm 11 kg
A self-made 4-tier rack with a solid structure. The shelf board is only about half the depth, and it seems to be supplemented by another board. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: Outer dimensions W675 × H804 × D502 Inner dimensions W (1st stage 599, 2nd to 4th stage 548) × H (1st stage 95, 2nd to 3rd stage 175, 4th stage 225) × D (1st to 3rd stage forward 250, 4th stage forward 502 , 2nd stage rear 148, 3rd stage rear 96) mm Weight 34.3kg
※Dividers and dowels are missing, so it's cheap. This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and stains on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
※Dividers and dowels are missing, so it's cheap. This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and stains on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
Aquarium Fancy's 4-tier rack shelves are fixed. It is lightweight yet well-built. Since it's lightweight, it's easy to handle. If you have been looking for this size, please take this opportunity. The exterior is good with no noticeable damage (Kobayashi Hitoshi)
Accessories: none
Main specifications: 350, 125 mm from above shelf height W560 x H628 x D502 mm 18 kg (actual measurement)
HAMILEX 6-tier rack A highly decorative rack with wood grain. It is possible to install 6 thin devices. There are several small scratches and threads on the exterior (Satoshi Yonejima)
Accessories: no accessories
Main specifications: size W600 x D380 x H1,019 mm Weight 33 kg Top plate load capacity: 15 kg or less Shelf load capacity: 15 kg or less Bottom plate load capacity: 30 kg or less
The well-made 2-tier rack is impressive. According to the seller, it is produced by a long-established enclosure shop, but there are no nameplates or materials, and the manufacturer is unknown (Murakoshi Yoichi)
Accessories: none
Main specifications: W610 x H357 x D500 mm 26 kg (actual measurement)
This is ADK's AV rack. It is well-made with a structure that makes full use of the robustness of the audio rack. There are traces of placement on the top plate, and there is dullness all over (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1140 x H432 x D330 mm weight 20 kg top plate load capacity 50 kg
The price has been reduced. 2022/12/19 sales price 15,000 yen*Inexpensive because it has many scratches and is not in good condition. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. The dowel screw is not genuine (Oikawa Tetsuji)
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
* It is inexpensive because the sticker on the attached plate has peeling, dents, footprints, etc. It has a sturdy construction with a board thickness of 50 mm. The position of the shelves can be changed in 3 steps*Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: W615 x H454 x D550 mm 37.0 kg (actual measurement)
※Inexpensive due to lack of glass doors, shelves, and dowels. Hamilex casual AV rack There is a hole in the back panel for cables to pass through, so wiring is possible. There is a small veneer peeling in the upper right corner, abrasions on the top plate, and bruises on the side edges and back (Kanai Hidetsugu)
Accessories: none
Main specifications: W1100 × H614 × D580 mm approx. 41 kg (when new)