A channel divider that employs a double integral subtraction arithmetic circuit system that performs high-pass and low-pass characteristics in one circuit. It is one that feels Toshiba's enthusiasm for audio at that time. Appearance and feeling of use (Hitoshi Kobayashi)
Maintenance information: 2022.4.30 (contact polishing after disassembling switches. Switch mecha fix. Input/output pin jack polish (Check the sound for a long time.)
Accessories: None
Main specifications: Double integral subtraction type arithmetic circuit system. Crossover point Low range: 80Hz to 6kHz High range: 300Hz to 15kHz Slope characteristic 6dB/oct, 12dB/oct (switch switching) input Impedance 100kΩ Output impedance Hi, Mid, Lo/CH: 600Ω SN ratio 100dB (20Hz to 20kHz, output 2.0V) W450 × H93 × D375mm 5.8kg
Balanced input option board AI2-B1 is included. A 4-way specification with two additional DN-35 units in the base housing. The high-sampling 192kHz/24bit compatible digital channel divider enables accurate phase control unique to this machine. The appearance is dull (Oikawa Tetsuji)
Maintenance information: 2022.4.10 operation confirmed
Accessories: instruction manual, power cable
Main specifications: Crossover frequency 54 points attenuation characteristics 7 types Digital input: Coaxial (RCA) 1 system size W475 × H171 × D405 mm Weight 18 kg
The price has been reduced. 2022/1/19 Sales price 64,800 yen*It has been changed to 3P inlet specification. 2-way specification with 500Hz/2way board! Channel divider for 2way/3way in AccuPhase You can change the crossover by replacing the board. It is one of the few channel dividers that allows you to enjoy multisystem while leaving an analog feel (Fujisawa Yukishi)
Maintenance information: 2022.1.19 operation confirmed
Accessories: copy of instruction manual, power cord
Main specifications: 2way/3way divider frequency fixed type W445 × H109 × D373mm 9.1kg
Accuphase channel divider with 2WAY, crossover 500Hz specification. If you add optional LA-25 and DA-25, you can support up to 4 WAY. In addition, since it can be used by switching to a subwoofer system or a 3D method, it is highly scalable and can be flexibly incorporated into the system. Serial O3Y102 (Itsuro Mizushima)
Maintenance information: 2022.3.27 operation confirmed
Accessories: Instruction manual (copy)
Main specifications: 500Hz specification input impedance balanced/40kΩ (20kΩ/20kΩ) unbalanced/20kΩ output impedance Balanced/50Ω (25Ω/ 25Ω) Unbalanced/50Ω SN100db Power Consumption 32W W475 × H170 × D380mm Weight 16.0kg
The price has been drastically reduced! 2022/3/22 Sales price 178,000 yen Frequency variable channel divider. With 4 built-in filters at 18dB/oct, 2-way/3-way, mono 4-way, and 5-way selectable by switch. A transformer is used for all inputs and outputs, which increases the freshness of the sound quality itself, and excellently improves notches and graininess. I have the impression that the sound is approaching like a fist. The appearance is dull, dirty, and faded (Sasaki Shota)
Maintenance information: 2020.9.11 maintained (FREQ each VOL all cleaning treatment (can't be removed), other SW cleaning, power supply filter C, each CH (INPUT coupling C replacement, part of the pattern in the main board has defective solder → check re-solder = operation check)
Accessories: power cable, English manual
Main specifications: 2way/3way (stereo) 4way/5way (mono) each crossover frequency stepless variable possible W483 × H89 × D248mm 4.5kg
Easy to use FOSTEX channel divider You can switch between 2 WAY/3 WAY. Detailed settings such as crossover frequency can be easily performed. It is the best match for the 2way specification of Altec and JBL. The appearance has scratches, dullness, etc. on the top plate. Serial 0090068 (Satoshi Yonejima)
Maintenance information: 2022.3.22 operation confirmed
Accessories: No accessories
Main specifications: 2way/3way electronic dividing network crossover frequency 2way/500, 650, 800, 1.2kHz, 2k, 3k, 5k, 8kHz
3way/500, 650, 800, 1.2kHz (Low/Mid) 2k, 3k, 5k, 8kHz (Mid/High) W482 × H44 × D235mm 3.5kg
Mark Levinson's famous channel divider It will be an unusual open module type. It is currently set to 650 Hz, but the frequency can also be changed (with a paid service). They tell me the tone unique to Levinson because of the good construction unique to the early Levinson. PLS-150 power supply There are scratches and scratches on the appearance. Serial 0257/1347 (Eiji Tamura)
Maintenance information: 2022.3.11 Operation confirmed (operation inspection and running test were performed, but there is no particular problem (capacitors including power supplies have been replaced in the past))
Accessories: Connection cable, power cable, LEMO x 6
Main specifications: Body W483 × H51 × D156 mm Weight 3.9 kg Power supply part W101 × H101 × D256 mm Weight 2.2 kg
The price has been reduced. 2022/1/27 sales price 99,800 yen 2/3 way compatible mono channel divider for business use. The time alignment (phase axis) of each speaker unit can be adjusted by delaying the sound with a delay. It can be used for stereo use with 2 units. The biggest attraction is that you can set the crossover arbitrarily, so you can create a sound that matches the characteristics of the unit to be used and to your liking. There is also a strength of push that seems to be used by professionals (Itsuro Mizushima)
Maintenance Information: 2018.12.6 Maintained (operation parts, switches, volume disassembly contacts cleaning. Each printed pattern power supply unit, other soldering correction rework. Transformer other fixed screw fastening retightening. I checked the filters. Clean the input/output terminals. (Good operation and output test)
Accessories: copy of instruction manual, power cable
Main specifications: Crossover Low/80/125/160/250/500/800Hz High/500/1250/1600/5000Hz W483 × H44 × D178mm 4.1kg/unit
The price has been drastically reduced! 2021/12/30 sales price 59,800 yen Maintained! Channel divider for 2WAY equipped with a crossover 250Hz board recommended for JBL4350 and 4343. Replaced with RCA terminals for ease of use. The tight low range and the mid and high range, which are expressed as clear contours, are attractive. It is recommended for those who are thinking of using multiple amplifiers. There are appearance, abrasions and scratches. Serial 3601 (Satoshi Yonejima)
Maintenance information: 2021.12.30 Maintained (ATT disassembly contact cleaning crossover frequency is measured 250Hz -12dB/Oct. Frequency characteristics check Capacitors check → They have been replaced and are good. (Replace input/output terminals with RCA terminals; interior and exterior cleaning)
Accessories: No accessories
Key Specifications: Attenuation Characteristics 12dB/Oct Total Harmonic Distortion Ratio 0.5% (20Hz to 20kHz) Frequency Characteristics 20Hz to 20KHz SN Ratio 90dB Gain 0dB (Using Pass Board) Input Impedance 50kΩ · Output impedance 47Ω W483×H44×D194mm 1.8kg
It is a 2-way specification of a crossover 300 Hz. A 2way/3way channel divider that allows you to change the crossover by replacing the board. Attenuation characteristics can be switched between -12 dB and -18 dB/oct. There are scratches on the top plate, small scratches on the front panel, and dullness on the terminals (Yoichi Murakoshi)
Maintenance information: 2022.1.15 sound output confirmed
Accessories: Instruction manual (copy), power cord
Main specifications: 2way/3way channel divider frequency characteristics (single channel equivalent band) 20Hz to 20kHz slope characteristics -12dB/oct, -18dB/oct, -24dB/oct Switch changeover type W445 × H109 × D373mm 9.1kg
※ It is cheap because of the poor appearance. Pioneer's 3-way network launched in the early 70's. The bass is moderately tight, and the mids are thick and extruded for a pleasant sound. The appearance has dullness, rust, and blemish floats. Serial V6849/V6850 (Eiji Tamura)
Maintenance information: 2022.1.19 operation confirmed (ATT is gully, but it is the current situation.)
Accessories: none
Main Specifications: Network Crossover for 3 Way 750Hz/4.5KHz 8Ω W260 × H65 × D143mm 1.4kg
The disposal price was lowered. It is not applicable for member discounts. 2021/12/28 selling price 148,000 yen crossover 650Hz F-20M. It is a dedicated model for 2-way drive of JBL's M9500 and Project K2 S9500/S7500. It is equipped with a dedicated filter amplifier circuit and a dedicated frequency board FB-650M, and the filter characteristics equivalent to that of the speaker LC network are obtained. * The appearance is the same as the F-20, but the slope changeover switch is fixed to -18 dB/OCT. Serial A9Y302 (Itsuro Mizushima)
Maintenance information: 2021.12.28 operation confirmed
Accessories: copy of instruction manual, power cable
Main specifications: Crossover 650Hz W475 × H150 × D395mm Weight 10kg
* Currently sold goods. A channel divider that can be switched up to 2 ways 3 ways for stereo and 4 ways for mono. It is a machine that is easy to operate and can be enjoyed in various ways. It has a neutral sound quality that is typical for business use. The appearance is dull and there are many small scratches. Serial 01017498 (Satoshi Yonejima)
Maintenance information: 2022.1.6 operation confirmed
Accessories: No accessories
Main specifications: W483 × H45 × D150mm 2.4kg
The disposal price has been reduced! (Member discount is not applicable) 2021/12/4 selling price 258,000 yen 3 way cross channel divider with 800 Hz/7,000 Hz specification. Up to 4 ways can be supported by adding optional LA-25 and DA-25. In addition, since it can be used by switching to the subwoofer method or the 3D method, it is highly scalable and can be flexibly incorporated into the system. In appearance, there are light stains and dullness. Serial G9Y185 (Satoshi Yonejima)
Maintenance information: 2021.12.4 operation confirmed
Accessories: Instruction manual
Main specifications: Crossover 800Hz/7,000Hz Dimensions W475 × H170 × D380mm Weight 20kg
The price has been reduced. 2021/12/4 selling price 398,000 yen. This is a 4-way digital multi-channel divider that realizes full digital signal processing. It is one of the few models that can connect with HS-Link and input SACD data with digital signals. All four outputs have both RCA/XLR connections, and each channel has independent left and right digital attenuators. Cut-off frequency of 59 points, high-order slope characteristics, phase, level control, etc. can be arbitrarily adjusted (Yoichi Murakoshi)
Maintenance information: 2021.12.4 sound sound sound confirmed
Accessories: instruction manual, power cable
Main specifications: 4-way divider unit standard equipment [analog input] RCA × 1, XLR × 1 [digital input] optical × 1, coaxial × 1, HS-LINK × 1 [analog output] XLR × 1, RCA × 1 [ Digital output] Coaxial × 1 W465×H150.6×D395.8mm 14.1kg
* Currently sold goods. It is a channel divider that can handle multi-way speaker systems with plenty of room. Since it is a variable type, it can flexibly respond to various combinations. Appearance has dullness and small scratches. Also, the input GAIN knob of LCH is a little stiff. Serial 000010154 (Satoshi Yoneshima)
Maintenance information: 2021.11.26 Operation confirmed
Accessories: instruction manual, power cord, original box
Main Specifications: Stereo 2WAY Mono 3WAY Channel Divider Input Connector XLR (No.2 Hot) Output Connector XLR Crossover Frequency Stereo Mode Low/ High45 to 960 Hz, or 450 Hz to 9.6 kHz (x 10 o'clock) Mono Mode Low/Mid45 to 960 Hz, or 450 Hz to 9.6 kHz (× 10 o'clock) Mid/High 45 ~ 960Hz, or 450Hz to 9.6kHz (× 10:00) W482.6×H45×D175mm Weight 1.7kg
3-way specification! It is a 3-way specification of crossover 500 Hz and 7,000 Hz. A 2way/3way channel divider that can change the crossover by replacing the board. Attenuation characteristics can be switched between -12 dB and -18 dB/oct (Shota Sasaki)
Maintenance information: 2021.11.22 Operation confirmed
Accessories: power cable, explanation
Main Specifications: 3way Channel Divider 500Hz/7000Hz Frequency Response (Single Channel Equivalent Band) 20Hz to 20KHz Slope Characteristics-12dB/oct, -18dB/Oct, - 24dB/OCT switch switching type W445 × H109 × D373mm 9.1kg
With original box This is 8,000 Hz frequency board for F-5/F-15/F-15L. Recommended for those who want to expand to 3way. There are no noticeable scratches (Shota Sasaki)
Maintenance information: Operation confirmed on 2021.11.22F-15
Accessories: original box
Main specifications: Compatible models F-5/F-15/F-15L Attenuation characteristics -12, -18dB/oct 8,000 Hz
The price has been reduced! 2021/11/14Sales price 398,000 yen It is a 4-way digital multi-channel divider that realizes full digital signal processing. It is one of the few models that can connect with HS-Link to input SACD data digital signals. All four outputs have both RCA/XLR connections, and each channel has a left-right independent digital attenuator. Cutoff frequency of 59 points, high-order slope characteristics, phase, level control, etc. can be arbitrarily adjusted. The appearance has Rubbing and Slight Scratch on the body. Serial L6Y248 (Satoshi Yoneshima)
Maintenance information: 2021.11.14 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 4way divider unit standard equipment [analog input] RCA × 1, XLR × 1 [digital input] optical × 1, coaxial × 1, HS-LINK × 1 [analog output] XLR × 1, RCA × 1 [ Digital Output] Coaxial × 1 W465 × H150.6 × D395.8mm 14.1 kg
We have cut the price! 2021/8/1 selling price 79,800 yen Maintained. 3-way specification with 500Hz/7000Hz board! Channel divider for accuphase 2way/3way You can change the crossover by replacing the board. It is one of the few channel dividers that can enjoy multi-system while leaving an analog feel. There is a scratch on the top plate (Tetsuji Oikawa)
Maintenance information: 2021.8.1 Maintained (filter amplifier part phase correction capacitor for short circuit replacement coupling capacitor each replacement input ATT mute relay each replacement (Solder correction card edge contact cleaning Each input and output voice frequency characteristics check Interior and exterior cleaning)
Accessories: power cable, copy of instruction manual
Main specifications: 2way/3way divider frequency fixed type W445 × H109 × D373mm 9.1kg
We have reduced the disposal price! (Member discount is not applicable) 2021/9/10 Selling price 378,000 yen 3-way specification channel divider with acuphase. The high sampling 192kHz/24bit compatible digital channel divider enables accurate phase control unique to this machine. * Option board AI2-U1 is required separately for analog line input. In appearance, there are no noticeable scratches. Serial L9Y018 (Eiji Tamura)
Maintenance information: Operation confirmed at 2021.9.10 Accuphase (Some DN-35 cannot be used by some lots.)
Accessories: instruction manual, power cord
Main specifications: 3-way specifications Attenuation characteristics 7 types Digital input: Coaxial (RCA) 1 system size W475 × H171 × D405mm Weight 18 kg
We have drastically reduced the price! 2021/9/19 selling price 298,000 yen It is a crossover 250Hz that can be used for JBL4350/4343. By making a substrate for each speaker, we are trying to achieve an accurate crossover, and the sound quality is KRELL's warm and thick sound image with a core. It can be safely combined with 43 series speakers. The appearance has abrasions and line scratches on the top plate. Serial 2200090495 (Satoshi Yonejima)
Maintenance information: 2018.3.16 Maintained (30 capacitors replaced (Vishay BC), volume contact cleaning, shut-off characteristic check, each amplifier output DC offset readjusted)
Accessories: copy of instruction manual, power cable, connection cord
Main specifications: 2way channel divider Axis genuine imported input RCA × 1 balance × 1 body: W483 × H70 × D383mm 6.8kg Power supply part: W222 × H64 × D286mm 3.3kg
* Because it is cheap, it will be delivered as it is. BEHRINGER's channel divider. Supports up to stereo 2/3WAY and mono 4WAY. Independent gain control, mute, and phase inversion switches for each band allow for smooth adjustment. The mute button lamp on the left CH is out. No rubber legs (Shota Sasaki)
Maintenance information: 2021.8.6 sound confirmed
Accessories: power cable, commentary
Main specifications: Limiter 25Hz low cut switch equipped 24dB/oct Servo balance input/output connector/XLR W482.6 × H44.5 × D217mm 3kg
* Since there are many missing accessories and scratches, we will sell them inexpensively. A 3-way digital channel divider that can freely change the frequency. Ideal for live performances, discos, movie theaters, and hall acoustics. Remote from a PC is also possible, so it can be flexibly adapted to various speaker systems. The appearance has noticeable scratches on the top plate (Shota Sasaki)
Maintenance information: 2021.9.11 operation confirmed
Accessories: nothing (power cable shortage)
Main specifications: Digital crossover: 24-bit/96kHz Gold-plated on all input/output terminals Adopts servo-balanced XLR connector W482 × H44 × D217 mm 3kg
price cut! 2021/2/23 sales price 70,000 yen maintained. 2-way, 3way channel dividers that can be switched in a variety of ways. It is compatible with a variety of crossovers, and can be adjusted at a fine level and is very convenient to use. There are small scratches and dullness corresponding to the year (Oikawa Tetsuji)
Maintenance Information: 2021.2.23 Maintained (LR MID-RANGE volume replacement.
In addition, high-range was replaced with a new volume just like MID-RANGE to ensure quality. (The sound is finally checked by adding aging operation)
Accessories: none
Main specifications: Low150/250/400/600/800/1KHz High1.5K/2.5K/3.5K/4.5K/6K/8Khz W200 × H149 × D316mm 3.8kg
※ There is no problem with operation, but it is currently sold because it is inexpensive. Adjustable frequency 3way digital channel divider It becomes a divider that can also be used for JBL4343 etc. Acoustic output system multiprocessor. It is full of features including howling sublessers, subharmonic synthesizers, equalizers, compressors, limiters, crossover delays, and 28-band real-time analyzers. There are no noticeable scratches on the appearance. Serial 00012268 (YONEJIMA Satoshi)
Maintenance information: 2021.8.30 operation confirmed
Accessories: power cable
Main specifications: Size W483 × H45 × D146mm (EIA1U) Weight 2.5kg
※ Because it is inexpensive, it will be passed as is It is a channel divider that can support multi-way speaker systems with plenty of room. Since it is variable, it can be flexibly compatible with various combinations. In appearance, there are scratches and dullness. Serial DC97JC-10048 (Tamura Eiji)
Maintenance Information: 2021.8.13 Operation confirmed
Accessories: power cord
Main Specifications: Stereo 2WAY Mono 3WAY Channel Divider Input Connector XLR (No.2 Hot) Output Connector XLR Crossover Frequency Stereo Mode Low/ High45 to 960 Hz, or 450Hz to 9.6kHz (x 10 o'clock) mono mode Low/Mid45 to 960 Hz, or 450Hz to 9.6kHz (x10 o'clock) Mid/High45 to 960Hz, or 450Hz to 9.6KHz (x 10:00) W482.6 x H45 x D175 mm Weight 1.7 kg
* Operation is fine, but it is cheap so it will be passed as it is. Bellinger's easy channel divider. In addition to stereo 2Way mono 3Way, the mono subwoofer output also supports 2.1ch systems with excellent cost performance. There are dullness and small scratches on the whole. (Yoichi Murakoshi)
Maintenance information: 2021.1.3 sound confirmed
Accessories: power cord, original box
Main specifications: 2-way/3-way (mono) channel divider 2.1ch compatible W583 × H45 × D217mm 3kg
price cut! 2021/4/20 sales price 59,800 yen Accuphase channel divider. Comes with 800Hz 2way board You can change the crossover by replacing the board. It is one of the few channel dividers that allow you to enjoy multi-system with an analog feel. Appearance has small scratches and dullness corresponding to the year (Oikawa Tetsuji)
Maintenance information: 2021.4.20 Maintained (volume replacement, additional modification of wire rod muted relay and coupling capacitor degradation due to deterioration)
* Each input and output voice check crossover characteristics check interior and exterior has been cleaned.
Accessories: Power cable, manual copy
Main specifications: 2way · 3way divider frequency fixed W445 × H109 × D373mm 9.1kg
Bellinger's easy channel divider. In addition to stereo 2Way mono 3Way, the mono subwoofer output also supports 2.1ch systems with excellent cost performance. (Fujisawa Yukishi)
Maintenance information: 2021.7.24 working confirmed
Accessories: Instruction manual, power cord, original box
Main specifications: 2-way, 3-way (mono) channel divider 2.1ch compatible W583 × H45 × D217 mm 3kg
price cut! 2021/7/1 selling price 24,800 yen*It will be passed as a status quo because it is inexpensive. BEHRINGER channel divider Input A is the digital input of AES/EBU. Perfect for live performances, discos, cinemas, and hall acoustics. Remote from PC is also possible to flexibly adapt to a variety of speaker systems. There is a write in the instruction manual. Appearance, dullness and small scratches are seen. Serial S19800090B6H (Satoshi Yoneshima)
Maintenance information: 2021.7.1 operation confirmed
Accessories: Instruction manual, power cable, original box
Main specifications: Digital crossover: 24-bit/96kHz All input and output terminals with gold-plated servo balanced XLR connectors W482 × H44 × D217mm 3kg
Disposal price has been reduced. Member discounts are not applicable. 2021/6/23 selling price 348,000 yen Mark Levinson fan coveted electric crossover. 2 way 300Hz specification From the feel of the knob that is likely to be a yamizuki, you can see the good of the initial Levinson's creation. Levinson's unique timbre can also be heard in the divider too. (Fujisawa Yukishi)
Maintenance Information: 2016.1.7 Maintained (power supply unit negative side voltage is reduced, capacitor replaced with spug, 4 x x body contact cleaning, vernier dial position misalignment (Correction, crossover characteristics inspection, spec inspection)
Accessories: power cord, 1 pair of remo pins, 3 pairs of Remo RCA cables
Main specifications: 2-way 300Hz specification closed module type RCA input/output size (body) W483 × H51 × D156mm 2.8 kg size (power supply unit) W101 × H101× d256mm 2.2kg
Disposal price cut! (Member discounts are not applicable) 2021/6/24 selling price 258,000 yen 3way cross 500Hz/7,000Hz specification channel divider. Add optional LA-25 and DA-25 to support up to 4WAY. It can also be used by switching to subwoofer and 3D methods, so it is highly scalable and can be flexibly incorporated into the system. In appearance, there is a thin stain or dullness. Serial L6Y881 (Satoshi Yoneshima)
Maintenance information: 2021.6.24 working confirmed
Accessories: Instruction manual, original box
Main specifications: crossover 500Hz · 7,000 Hz dimensions W475×H170 × D380mm Weight 20kg
Disposal price has been reduced. Member discounts are out of application. 2021/06/04 Selling price 230,000 yen. Chandeva is aiming to achieve accurate crossover by making a substrate for each crossover 1200Hz speaker! The sound quality is also attractive with a core in a warm KRELL (Yosuke Kojima)
Maintenance Information: 2018.3.16 Maintained (replacing all 30 depleted capacitors on the main unit and power supply unit (Vishay BC) Contact cleaning for the vishay BC. Output DC offset readjustments for each amplifier. (Inspection of shut-off characteristics and spec inspections are performed)
Accessories: Power supply, power cable, connection cable
Main specifications: 2way channel divider Axis genuine imported product Input RCA x 1 Balance × 1 Body: W483 × H70 × D383mm 6.8 kg Power supply: W222 × H64 × D286mm 3.3kg
A variable 3-way channel divider that will be in stock for a long time. You can select crossover frequencies of LOW, MID-4 stages, and MID/HIGH stages. In addition, it is equipped with a FLAT position. Switchable 200/400/570/800Hz, 2500/3500/5000/7000Hz respectively The appearance has small scratches and corrosion. Serial 141846 (YONEJIMA Satoshi)
Maintenance information: 2011.5.1 Maintained (replacement of 6 coupling capacitors, SW, VR cleaning adjustment)
Accessories: no accessories
Main specifications: W408 × H134 × D280mm Weight 5.4kg
The price was reduced. 2021/6/20 selling price 7,000 yen*Current sale item. Bellinger's easy channel divider. In addition to stereo 2Way mono 3Way, the mono subwoofer output also supports 2.1ch systems with excellent cost performance. It remains a little feeling of use. (Kondo Hirotsugu)
Maintenance information: 2021.6.20 working confirmed
Accessories: power cord
Main specifications: 2-way, 3-way (mono) channel divider 2.1ch compatible W583 × H45 × D217 mm 3kg
price cut! 2021/6/14 selling price 7,000 yen*Current sale item. Bellinger's easy channel divider. In addition to stereo 2Way mono 3Way, the mono subwoofer output also supports 2.1ch systems with excellent cost performance. The appearance has dullness and scratches. Serial S1811033455CC (Satoshi Yoneshima)
Maintenance information: 2021.6.14 working confirmed
Accessories: Instruction manual, power cable
Main specifications: 2-way/3-way (mono) channel divider 2.1ch compatible W583 × H45 × D217mm 3kg
Easy-to-use FOSTEX channel divider. You can switch between 2WAY/3WAY. Detailed settings such as crossover frequency can also be easily performed. Best match for the 2way specifications of Altec and JBL. The appearance has a feeling of use such as scratches, dullness on the top plate. Serial 0090282 (Asai Chiho)
Maintenance information: 2021.6.20 operation check
Accessories: none
Main specifications: 2way/3way electronic splitting network crossover frequency 2way/500, 650, 800, 1.2KHz, 2k, 3k, 5k, 8KHz
3way/500, 650, 800, 1.2KHz (Low/Mid) 2k, 3k, 5k, 8KHz (Mid/High) W482 × H44 × D235mm 3.5kg
Significantly reduced price. 2021/06/07 Selling price 348,000 yen. Mark Levinson fan coveted electric crossover 2-way 300Hz specification From the feel of knob that seems to be a yamituki, you can see the goodness of early Levinson's creation. Levinson's unique timbre makes me listen to it in dense even the divider. (Yukishi Fujisawa)
Maintenance information: 2016.1.7 Maintenance (Power supply unit replacement for negative voltage drop, Condenser is replaced with sprugs, 4 Borium main unit contact cleaning, Vernier dial disposition (Correction, Crossover Characteristic Inspection, Spec Inspection)
Accessories: instruction manual, power cable, 3 pairs of remo pins
Main Specifications: 2-Way 300Hz Closed Module Type RCA Input/Output Size (Body) W483 × H51 × D156mm 2.8 kg Size (Power Supply) W101 × H101× D256mm 2.2 kg
2/3-way commercial mono channel divider The time alignment (phase axis) of each speaker unit can be adjusted by delaying the sound. Can be used for stereo use in 2 units. The biggest attraction is that you can optionally set the crossover, so you can create the characteristics of the unit used and the sound to your liking. There is also a professional push strength (Yosuke Kojima)
Maintenance Information: 2018.12.6 Maintenanced (operating parts, switches, volume disassembly contact cleaning. Each print pattern power supply unit, other soldering correction rework. Transformers and other fixed screw fastening and tightening. I checked the filter. Input and output terminal cleaning. (Good operation and output test)
Accessories: Instruction manual copy, power cable, 2 EQ cartridges
Main Specifications: Crossover Low/80/125/160/250/500/800Hz High/500/1250/1600/5000Hz W483 × H44 × D178mm 4.1 kg/unit
Sansui's few 2-4-way NF type channel dividers This channel divider pursues basic characteristics and multi-function features a highly saturated timbre that is close to JBL speakers. After adjustment, the ceiling panel is clean and the design is excellent. There is a line scratch on the top plate and the front ceiling panel (Yosuke Kojima)
Maintenance Information: 2016.3.1 Maintenance (HIGH UPPERMIDE LOWERMIDE LOW Transistor Replacement in each Circuit, Power Supply Circuit Rectifier Diode Replacement, Switch volume cleaning)
Accessories: Instruction manual copy
Main specifications: 2/3/4way NF filter type channel divider SNR 90dB or more cutoff frequency (± 10%) [F1] 60/75/95/120/150/190/240/300/ 380/480/600Hz [F2] 300/380/480/600/750/950/1.2K/1.5K/1.9K/2.4K/3kHz [F3] 1.5k/1.9k/2.4k/3K/ 3.8K/4.8K/6K/7.5K/9.5K/12K/15kHz with low booster function (turnover 60Hz/100Hz) W482 × H88 × D305mm 6.4kg
It is a crossover 250Hz that can be used for JBL4350/4343! Chandeba is trying to achieve accurate crossover by making a substrate for each speaker! The sound quality is also an attractive thing with a core in warm KRELL seems to be KRELL There are scratches and line scratches on the main body top plate (Yosuke Kojima)
Maintenance Information: 2018.3.16 Maintenance (Replacement of 30 Capacitors (Vishay BC), Volume Contact Cleaning, Breakout Characteristic Inspection, DC Offset Reconfigured for Each Amplifier Output)
Accessories: Power supply unit, power cable, connection cable
Main specifications: 2-way channel divider Axis regular imported product input RCA × 1 Balance x 1 Body: W483 x H70 × D383mm 6.8 kg Power Supply: W222 × H64 × D286mm 3.3kg
The Chandeba board of the FB800 is loaded. 2way dedicated multi-channel divider 2-way dedicated design with balanced input/output circuit. Clear and fresh multi-system can be built. Serial A9Y397 (Hiroshi Kondo)
Maintenance Information: 2021.5.29 Operation Check
Accessories: Instruction manual, power cord, original box
Main Specifications: Crossover 800Hz W475×H150 × D395mm Weight 10kg
Significantly reduced price! 2021/5/20 The current multichannel divider with a full model change of the DF-55 price 648,000 yen! Equipped with high-speed, high-precision DSP, realizes higher-order filter characteristics with less error. The monophonic mode, which enables parallel drive of D/A converters, enables full use of the DF-65 for further performance improvements. Appearance, there are some bruises. Serial E7Y001 (Satoshi Yonejima)
Maintenance Information: 2021.5.20 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: Cutoff frequency 31.5Hz to 22.4kHz (-30 dB, 59 points) attenuation characteristics 6dB/octave, 12/octave, 18/octave, 24/octave, 48/ octave, 96/octave level control Each band +45.0dB to 40.0dB (0.1 dB step) Time Alignment 0.5cm Units Up to 3000cm Configuration Memory Functions 1 to 5 Analog Inputs 2 (RCA, XLR) Digital Input 3 (Coaxial, Optical, HS-LINK) Digital Audio Output 1 System (HS-LINK) Preout: 4 Systems (RCA/XLR × 4)
W465 x H151 x D396mm Weight 15.1kg