There is only one. “Beehive” is a classic horn for JBL 1 inches. You can enjoy the sound and atmosphere of old JBL by attaching JBL LE175 or LE85. There is a lot of paint peeling and rust on the exterior (Daiki Goto)
Accessories: None
Main specifications: 1 inch crossover frequency 1200Hz or more directional 60° (conical) honeycomb W145 × H145 × D173 mm 1.5kg
The disposal price has been reduced. Member discounts are not applicable. 2022/5/28 sales price 178,000 yen Gold wing with height adjustment stay 2505 included! A rare professional model number, a combination of L5090+H5039 A horn lens composed of a square exponential horn and an acoustic lens with a hyperbolic plate. Acoustic lenses that shine in gold are also familiar at Hartsfield. The unique sound from the metal multi-wing structure is blown up by. There is dullness on the whole (Yoichi Murakoshi)
Accessories: 2505
Main specifications: Recommended crossover 500Hz directivity 100° × 60° W508 × H172 × D419mm 7.7kg
Comes with a 2-inch throat from JBL A horn made to match Yamaha's JA-6670 and JA-6681. The goodness of making is Yamaha. There is a slight feeling of use (Yoichi Murakoshi)
Accessories: None
Main specifications: cut-off frequency 230Hz W712.8 × H248 × D449mm (not including throat)
※The color is different on the left and right, so it is inexpensive. Straight short horn for 1" driver It is a standard model that has been used in various speakers and has been used for a long time. Peeling paint and dirt are noticeable on the whole exterior (Ryo Mizusaki)
Accessories: none
Main specifications: Directional characteristics 90° (horizontal) /45° (vertical) Throat diameter 2.5cm Crossover frequency 500Hz or more Horn total length 216mm 1.1kg/1
A YL acoustic folding horn type of unknown manufacturer with few arrivals. It seems to be a little smaller than the original. Compatible with 4-screw type screwdrivers. How about taking this opportunity? There is a feeling of use overall (Yoichi Murakoshi)
Accessories: None
Main specifications: External dimensions Opening 765 × 565 mm Driver mounting part Inner caliber 18 mm Mounting screw hole Diagonal diameter 57 mm W765 × H850 × D500mm 18 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2022/3/22 sales price 59,800 yen Compact radial horn. A JBL compression driver with a throat diameter of 2.5 cm can be installed. It is made of die-cast aluminum and coated with a special damping agent Lansa Plus on the outside to prevent resonance. The appearance may be scratched, paint peeling, etc. Serial 28552/30072 (Kimiya Miura)
Accessories: No accessories
Main specifications: Directivity (horizontal × vertical) 90 × 40 crossover frequency 800Hz W584 × H140 × D394mm 9.1kg
* It is inexpensive because there is a lot of paint peeling off. It is a horn designed for LE85 and LE175. Since the effective length of the exponential horn is longer, the connection with the woofer is smoother. Scratches and paint peeling can be seen on the exterior. Serial 9105/9122 (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Throat diameter 2.5cm Crossover frequency 800Hz or more/LE175, LE85 Horn total length 293mm (horn depth only) Dimensions W250 × H150 × D60mm Weight 2.7 kg
The price has been reduced. 2022/4/4 Sales price 49,800 yen* It is cheap because there are many scratches and one side throw travel is missing. JBL 2 inch screwdriver wooden horn Originally designed for concert halls, it is a horn that spreads sound over a wide area without difficulty. Because it is made of wood, it echoes a warm and soft tone that is different from metal (Shota Sasaki)
Accessories: none
Main specifications: Directivity 140 degrees × 60 degrees (horizontal × vertical) Crossover frequency 800 Hz W660 × H95 × D340 mm Weight 4.4 Kg
A YL acoustic ghost horn type of unknown manufacturer with few arrivals. Compatible with 38mm threaded screwdrivers How about taking this opportunity? Overall, there are feeling of use, small scratches, scratches on the opening, paint removal (Yoichi Murakoshi)
Accessories: None
Main specifications: cut-off 70Hz crossover 130Hz to 500Hz Actual size: horn opening external dimensions W975xH685mm W975xH2010xD730mm Driver opening diameter 38mm
Comes with an original box! CORAL's acoustic lens AL-601 is in stock. Compatible with tweeters up to 60mm in horn opening diameter, such as the H-60. The higher the frequency of the sound, the narrower it becomes, so it is used to diffuse the sound and compensate for the lack of radiation angle in the treble range (Shota Sasaki)
Accessories: original box
Main specifications: Diffusion angle/horizontal direction 80 degrees vertical direction 45 degrees effective frequency 3 kHz or more compatible horn caliber 60 Φmm or less width 130 × height 92 × depth 35 mm weight 130 g
The price has been reduced. 2021/12/17 selling price 18,000 yen. A sectoral type self-made 1-inch horn that looks like the ALTEC 311-90 has become smaller. It's a short horn, but it seems to spread quite well. (Yoichi Murakoshi)
Accessories: none
Main specifications: throat diameter 25mm W375 × H120 (throat 102) × D250mm 0.8kg
The disposal price has been reduced! (Member discounts are not applicable) 2021/12/20 selling price 49,800 yen* Throat (2328) is cheap because it is out of stock. This is a wooden horn for JBL 2 inch drivers. Originally designed for concert halls, it is a horn that spreads sound over a wide area without difficulty. Since it is made of wood, it echoes a warm and soft tone that is different from metal. The appearance may be dull and paint peeling. Serial 11535/12219 (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Directivity 140° × 60° (horizontal × vertical) Crossover frequency 800kHz W660 × H95 × D340mm 4.4Kg
JBL's exponential horn Since it is a long horn, it can be used at low crossover frequencies. Combined with an acoustic lens, it is possible to create highly directional monitor sounds. The appearance is slightly dull, and there are small scratches in some places (Yoichi Murakoshi)
Accessories: None
Main specifications: crossover frequency 800Hz sound pressure level 108dB (2308 lens used) throat diameter 2.5cm diameter 156 × D293mm weight 1kg/book
The details are unknown, but it is a wood horn made quite carefully. Originally, the 299-8A of ALTEC was mounted. It is a defraction phone whose interior is partitioned by 5 fins. The appearance has small scratches, etc. (Kimiya Miura)
Accessories: No accessories
Main specifications: W680 × H130 × D364 mm Weight 9.6 kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/3/24 sales price 89,800 yen A 2-inch throat of Raft Craft is mounted on JBL's large professional radial horn. Of course, JBL can be mounted as it is. A radial horn with a straight sound and a moderately wide sound. Please try the sound with good sound skipping, which is also used for large output outdoor use. The exterior has been repainted and there is a slight stickiness and paint peeling. Serial 11462/11474 (Tamura Eiji)
Accessories: No accessories
Main specifications: Radial horn crossover for 2 inches 500Hz Directivity: horizontal 60° × vertical 40° W613 × H203 × D508mm 9.5kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2022/1/26 selling price 59,800 yen A wooden horn that can be mounted with a JBL 2 inch driver. I don't know the details of the manufacturer, etc., but it's made like 2397. It spreads the sound over a wide range without difficulty, and echoes the warm and soft tone typical of a wooden horn. The appearance may be dull or dirty. (Eiji Tamura)
Accessories: No accessories
Main specifications: W670 × H120 × D430 mm Weight 6.1 kg
Comes with a self-made wooden stand and stay. A sectoral horn made of aluminum die-cast that represents Altec. It is a horn with an attractive wide diffusion characteristic and has a core that is easy to listen to. There is a rust float on the whole (Fujisawa Koshi)
Accessories: self-made wooden stand, stay
Main specifications: Crossover frequency 800Hz compatible driver 802-8D, 806-8A, 807-8A W470 × H220 × D340mm 4.1kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/3/23 sales price 15,000 yen Unspecified bi-radial horn. It feels like an EV when I saw it. It is possible to mount JBL 2-inch screwdrivers, etc. The appearance is dull. (Eiji Tamura)
Accessories: No accessories
Main specifications: W440 × H290 × D150mm own weight 1.06 kg/book
The price has been reduced. 2022/4/20 selling price 25,000 yen ONKYO horn and diffuser set. Achieves high efficiency and wide directivity. The top of the AL-120 is cracked. (Daiki Goto)
Accessories: None
Main specifications: W440 × H168 × D330mm Weight 2.0kg (actual measurement)
The price has been drastically reduced. 2022/4/23 sales price 180,000 yen. The sectoral horn used in the A5. It is characterized by a wide sound with a horizontal orientation of 90 degrees diffusion. Even so, the texture of the mid-high range is not thin, and it makes you feel a solid build. The exterior has small scratches and dullness (Yoichi Murakoshi)
Accessories: None
Main specifications: Horizontal Direction Characteristics 90 degrees Vertical Direction Characteristics 40 degrees Crossover Frequency 300Hz or more Compatible Driver 288C/288D/290E/291-16A 15.8kg/book
The disposal price has been reduced! (Member discount is not applicable) 2022/3/13 Sales price 79,800 yen A wooden morning glory horn designed and manufactured with a hyperbolic curve. It reproduces the soft singing voice that cannot be obtained with a metal horn, and the plump sound of the body of a stringed instrument. The feature is that the weight is 1/5 lighter than conventional aluminum horns coated with asphalt. The appearance has small scratches and dullness (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Cutoff Frequency 200Hz Compatible Driver Goto Unit SG-505, SG-555, SG-5880 Series JBL2 inch, ALTEC 1.4 inch each driver A combined throat sold separately is required. Diameter 560mm Length H760mm (including throat part) Throat diameter 30mm 2.6kg (actual measurement)
A sectoral horn made of aluminum die-cast representing Artec. The wide diffusion characteristics are attractive, and it is a horn with a core that is easy to listen to. There is a feeling of use such as dullness and small scratches. Serial 28026 26596 (Takasaki Atsushi)
Main Specifications: Crossover Frequency 800Hz Compatible Driver 802-8D, 806-8A, 807-8A W470 × H220 × D340mm 4.1kg
A giant curling horn of mane pine used for WE555 drivers. It comes with a self-made stand! I actually assembled a Western 555 at the store and played it, but it was a shocking sound that bathed in the sound with my whole body. It hits me straight with a realistic sound like I'm actually listening to in a concert hall. Comes with a self-made stand with casters (Sasaki Shota)
Accessories: self-made stand
Main specifications: Opening approx. W990 × H990mm Opening side Outer dimensions approx. W1,110 × H1,100mm Stand W1,170 × H920 × D690mm Stand+Horn Height Approx. 1,850mm Depth 1,300mm (all actual measurements)
The price has been reduced! 2022/4/5 Sales price 35,000 yen Altec Green's 811B! A sectoral horn made of aluminum die-cast representing Artec. The wide diffusion characteristics are attractive, and it is a horn that is easy to listen to while having a core. The appearance has a feeling of use such as small scratches and dullness. (Asa Tomoho)
Accessories: None
Main Specifications: Crossover Frequency 800Hz Compatible Driver 802-8D, 806-8A, 807-8A W470 × H220 × D340mm 4.1kg
* Currently sold items. A domestic horn for 1 inch that is very similar in appearance and specs to the ALTEC/511B. It is a sectoral horn with high radiation efficiency. There is dullness and dirt (Fujisawa Yukishi)
Accessories: None
Main Specifications: Sectional Horn Crossover 500Hz Directional Characteristics Horizontal 90 Degrees/Vertical 40 Degrees Throat Diameter 25.8mm Compatible Driver HFD-351 Compatible Adapter HYS-051 W593 × H270 × D470mm 9.5kg/book
Double Throat for JBL 2" By attaching two 375 or 2440 drivers, the sense of energy increases. You can experience the feeling that energy is strong and moving forward. It is recommended for those who want to increase the expressiveness of the mid-range. The horn can be used with JBL 2350/2355, etc. There are no noticeable scratches (Sasaki Shota)
Accessories: None
A sectional horn adopted in the model3401 speaker system. You can enjoy a rich sound and a wide tone made of aluminum and birch plywood (Tetsuji Oikawa)
Accessories: None
Main specifications: Reciprocating flare horn cut-off frequency 350Hz Recommended crossover frequency 900Hz or more Throat opening hole diameter Φ25.4mm Baffle opening size W184 × H102 mm W220×H120×D220.2mm 1.68kg
*Only 1 bottle. An exponential horn adopted in the company's representative speaker system “Paragon”. Emphasis on directivity in the horizontal direction. It boasts an excellent sound pressure level despite its small size (Itsuro Mizushima)
Accessories: None
Main specifications: Throat diameter 50 mm Screw hole approx. 7 mm Screw hole diagonal approx. 102 mm External dimensions W346 × H162 × D305 mm Weight approx. 3.2 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2022/3/14 sales price 350,000 yen. A replica horn of the phantom masterpiece WE-22A! The curve of the Carl Horn is beautiful with a good finish, and it seems to pull out the driver's base for 12 minutes just like the original. Appearance, stains, scratches, rust, paint peeling, paste marks, aluminum foil deadening of the throat part, etc. can be seen (Hitoshi Kobayashi)
Accessories: None
Main specifications: Compatible screwdriver/WE-555, YL555 series, Goto 555 series Usage frequency 150Hz to 4500Hz Opening W710 × H710mm Driver mounting part/Diameter approx. 35mm approx. 25kg
Bi-radial horn for JBL 2" driver Because it has no depth and a large opening, it makes you hear a light and open sound. It is a horn that can be played quite a bit because it is small and lightweight with a mild sound without tightness. Feeling of use, dullness, scratches (Sasaki Shota)
Accessories: None
Main specifications: 2 inch bi-radial horn cut-off 400Hz horizontal 60 degrees vertical 40 degrees throat diameter 5cm dimensions W445xH279xD236mm weight 2.2kg (1 bottle)
The price has been drastically reduced. 2022/3/18 Sales price 198,000 yen Altec's 8 secular horn with throat 30162. You can enjoy the sound with a sense of spaciousness and openness that you can't easily hear with other horns. It is a horn that gives the atmosphere of music firmly even at low volume (Katsuji Hiura)
Accessories: None
Main specifications: For 2 inch driver 8 sectional crossover 500Hz W610 × H390 × D460mm approx. 7.6kg
* It seems to be JBL HL88, but I don't know if it's original due to missing labels. We will sell it as it is at a low price Comes with a dedicated stand! Popular commonly known as the honeycomb horn. This is where I want to play it in conjunction with 375. Appearance has rust floats, surface deterioration, etc. (Oikawa Tetsuji)
Main Specifications: Crossover 500Hz Throat Diameter 50mm Lens Diameter 343mm Depth Dimensions 400mm Approx. 15kg
The price has been reduced! 2022/2/17 Selling price 79,800 yen* It is cheap because it is in poor condition such as butyl rubber being pasted. 2 inch driver horn+acoustic lens combination for use in close-range PA and monitors It makes 2441, 2440, etc. sound crisp. The appearance may be dull or dirty. Also, there is a part of the horn where butyl rubber or rubber melts and becomes dirty. (Eiji Tamura)
Accessories: No accessories
Main specifications: Directional horizontal 100 degrees x vertical 45 degrees for 2 inches Throat diameter 51mm Crossover frequency 800Hz W508×H156×D407mm 5.0kg
The disposal price has been reduced! (Member discounts are not applicable) 2021/12/23 selling price 42,800 yen Artec classic horn 511B. This is a 4 sectional horn for 1 inch. You can enjoy the horn sound unique to ALTEC with your favorite 1-inch driver such as 802-8D. There are repair marks and dullness in the corners of the exterior (Satoshi Yoneshima)
Accessories: No accessories
Main Specifications: Crossover 500Hz Directional Horizontal 90 × Vertical 40 Throat Diameter 250mm W600 × H270 × D486mm 6.7kg
The price has been reduced! 2021/12/26 selling price 59,800 yen compact radial horn. A JBL compression driver with a throat diameter of 2.5cm can be installed. It is made of die-cast aluminum and coated with a special damping agent Lansa Plus on the outside to prevent resonance. The appearance has a feeling of use such as chipping of the screw mounting part, peeling off paint, etc. (Nobuyuki Takahashi)
Accessories: none
Main specifications: Directional (horizontal×vertical) 90×40 crossover frequency 800Hz W584×H140×D394mm 9.1kg
The price has been reduced! 2022/2/7 selling price 180,000 yen A sectoral horn used in A5. It features a wide sound with 90-degree horizontally oriented diffusion. Even so, the texture of the mid-high range is not thin, and it makes you feel a solid build. The appearance has small scratches and dullness. (Wataru Sato)
Accessories: No accessories
Main specifications: Horizontal directional characteristics 90 degrees vertical directional characteristics 40 degrees crossover frequency 300Hz or more Compatible with driver 288C/288D/290E/291-16A 15.8kg/book
A short horn that fits JBL type 2 inch drivers. It is a radial type with a shape similar to an electro voice horn. Made of resin, the weight is light, and you can easily enjoy the horn sound. There is a tape mark on the back (Yoichi Murakoshi)
Accessories: none
Main specifications: Mounting 4 holes W300 × H200 × D160 mm 600g
Round straight horn for mid and high range. Originally, it is used at 1.2 kHz or higher, but it is also possible to use it at 1 kHz due to the hyperpoly curve. The appearance may be dull or scratched. There is also deadening. (Satoshi Yoneshima)
Accessories: No accessories
Key Specifications: Cutoff Frequency 600Hz Optimal Crossover 1kHz to 1.2kHz Overall Length 232mm Opening Diameter 180mm
The price has been drastically reduced! 2022/1/29 Selling price 158,000 yen A rare GOTO round straight horn for middle and low range has arrived! It can be attached to the driver unit SG-505DX for mid and low frequencies. It is a rare horn that is hard to see. If you are a GOTO fan, how about this opportunity? The appearance is deadened, and there are dullness and scratches. (Satoshi Yoneshima)
Accessories: No accessories
Key Specifications: Cutoff Frequency: 200Hz Optimal Crossover: 250-350 Hz Material: Aluminum Diaphragm Shape: Round Straight Overall Length: 800mm Opening Diameter: 540mm
The price has been reduced! 2020/12/25 Sales price 19,800 yen* There is no problem with the operation, but it is a current sale item because it is cheap. Details are unknown because there is no specified model number, but it will entertain you with a creepy sound. The appearance has a feeling of use over time such as scratches and dullness. (Morning Tomoho)
Maintenance information: 2021.12.14 band check OK (0.7kHz ~)
Accessories: none
Main specifications: Dimensions W290 × H175 × D280 mm Horn opening dimensions W240 × H130mm Weight 2.3kg (actual measurement)
The price has been reduced. 2021/12/16 selling price 25,000 yen. A self-made 1" wood horn with an opening angle of 120 degrees that looks like a smaller JBL 2397. It is elaborately made, and although it is a short horn, it seems that the sound skipping is good. (MURAKOSHI Yoichi)
Accessories: None
Main specifications: Throat part caliber 25 mm W385 × H48 (throat 102) × D268mm 1.1 kg
The price has been reduced. 2021/7/24 Selling price 59,800 yen ※ Because sand beige is painted, it is inexpensive. Wooden Horn for JBL 2" Driver Originally designed for concert halls, it is a horn that spreads sound over a wide range without difficulty. Because it is made of wood, it gives a warm and soft tone that is different from metal. (KONDO Hirotsugu)
Accessories: None
Main specifications: Directional 140 degrees × 60 degrees (horizontal × vertical) Crossover frequency 800Hz W660×H95×D340mm Weight 4.4Kg
The price has been reduced. 2021/10/17 selling price 69,800 yen JBL 2 inch screwdriver wooden horn Originally designed for concert halls, it is a horn that spreads sound over a wide range without difficulty. Because it is made of wood, it gives a warm and soft tone that is different from metal. The appearance has a feeling of use such as dullness (Kondo Hirotsugu)
Accessories: None
Main specifications: Directional 140 degrees × 60 degrees (horizontal × vertical) Crossover frequency 800Hz W660×H95×D340mm Weight 4.4Kg
The disposal price has been reduced! (Member discounts are not applicable) 2021/8/12 selling price 19,800 yen JBL's exponential horn. The long horn allows it to be used at low crossover frequencies. It is possible to create a monitor sound with high directivity in combination with an acoustic lens. The appearance is dull, and small scratches are scattered in some places. 1 serial 9426/19434 (Satoshi Yonejima)
Accessories: screws
Main specifications: Crossover frequency 800Hz Sound pressure level 108dB (using 2308 lenses) Throat diameter 2.5cm Diameter 156 × D293mm Weight 1kg/book
※ Because the texture is different on the left and right, it is inexpensive. A short horn used in 4343 and 4344. It can also be integrated into the enclosure, but you can also hear good sound by attaching a screwdriver and placing it on top of the enclosure. The appearance has a feeling of use such as dullness and scratches. (Morning Tomoho)
Accessories: None
Key Specifications: For 1" Drivers Directional Horizontal 80 Degrees, Vertical 45 Degrees Recommended Crossover 1.2kHz Baffle Opening Diameter 108mm Diameter Depth 216mm
JBL Professional Large Radial Horn with Throat Adapter 2328 A radial horn with a straight sound and a moderately wide sound. Please try the sound with good sound skipping, which is also used for large output outdoor use. The appearance has scratches and paint peeling in some places on the body. Serial 13496/33701 13191/33714 (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Radial Horn Crossover 500Hz for 2" Directivity: Horizontal 60° x Vertical 40° W613×H203×D508mm 9.5kg/1pcs
It is inexpensive because the condition is not good, such as the one-sided lens is deformed. Combination of 2 inch driver horn+acoustic lens for near range PA and monitor. It makes 2441, 2440, etc. sound well. It is recommended for those who hear too much noise with radial horns. The horn has been deadened. There is a slightly longer screw that stops the horn and acoustic lens, and there is a mark that the screw came into contact with the part that penetrated the diffuser. There are small scratches, dullness, paint peeling stains in other places (Shota Sasaki)
Accessories: None
Main specifications: Directional horizontal 100 degrees x vertical 45 degrees for 2 inches Throat diameter 51mm Crossover frequency 800Hz W508 × H156 × D407mm 5.0kg