Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Network players
- Integrated amplifiers
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Cables
- Insulators
- Racks
- Parts
- Tubes
- Manual
- Audio set
- Other audio
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other records
- Other soft
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- The price has been reduced! 2023/4/14 sales price 79,800 yen A wooden morning glory horn designed and manufactured with a hyperbolic curve. It reproduces soft singing voices that cannot be obtained with metal horns, and the rich sound of the fuselage of a stringed instrument. The feature is that it weighs 1/5 less than aluminum horns coated with asphalt up until now. There are small scratches and dullness on the exterior (Satoshi Yonejima) Accessories: no accessories Main specifications: Cut off frequency 200 Hz Compatible driver goto units SG-505, SG-555, SG-5880 series JBL 2 inch and ALTEC 1.4 inch require slots that are sold separately for each driver. Diameter 560 mm length H760 mm (including slot part) throat diameter 30 mm 2.6 kg
- description
- ※I think it's JBL HL88, but I don't know if it's the original because the label is missing. We will sell it at a low price as it is. Comes with a dedicated stand! Popular commonly known as beehive horns. This is where I want to play it together with 375. The exterior has rust, surface deterioration, etc. (Mizusaki Ryo) Accessories: front legs, stays Main specifications: crossover 500 Hz, slot diameter, 50 mm, lens diameter, 343 mm, depth dimensions: 400 mm, approx. 15 kg/1
- description
- The price has been reduced. 2022/9/7 sales price 29,800 yen MR94 mantalay horn throat adapter. Compatible with 1.5-inch drivers such as the 288 series. There are small scratches and paint peeling on the exterior (Oikawa Tetsuji) Accessories: none Main specifications: horn mounting side W100 x H315 mm driver side diameter 125 mm depth 330 mm 3.2 kg
- description
- Straight short horn for 1" drivers. It is a standard model that has been used in various speakers and has been used for a long time. The exterior has stains, paint peeling, etc. Serial 33399/35617 (Satoshi Yonejima) Accessories: no accessories Main specifications: Directional characteristics 90° (horizontal) 45° (vertical), slot diameter 2.5 cm, crossover frequency of 500 Hz or more, total horn length 216 mm, 1.1 kg/1
Manufacture:Western Electric
Price: JPY 318,182 Sold Out
- description
- *Only one bottle, commonly known as the Carl Baby Horn, has arrived for the first time at Hi-Fido. Horn for the company's 555 The material is made of febric, and it is an item that makes you feel particular about its shape. The sound is realistic and clear without any sense of distortion. There are paint peeling and scratches on the exterior. Stays have been changed from regular ones. (TAMURA Eiji) Accessories: no accessories Main specifications: W283 ✕ H424 ✕ D320mm weight 3.4 kg
- description
- Straight short horn for 1" drivers. It is a standard model that has been used in various speakers and has been used for a long time. There is dirt on the exterior. The plate has come off. Serial 26342/26459 (Kimiya Miura) Accessories: mounting screws Main specifications: Directional characteristics 90° (horizontal) 45° (vertical), slot diameter 2.5 cm, crossover frequency of 500 Hz or more, total horn length 216 mm, 1.1 kg/1
Manufacture:KANNO
Price: JPY 318,182(pair)Sold Out
- description
- A replica horn of the famous phantom instrument WE-22A! The curves of the Carl Horn have a nice finish and are beautiful, and they seem to bring out the driver's base to the same level as the original. The exterior has stains, paint removal, and peeling due to aging (Kimiya Miura) Accessories: no accessories Main specifications: Compatible driver/WE-555, YL555 series, Goto 555 series, usage frequency 150 Hz to 4500 Hz, aperture W710 x H710 mm, driver mounting part/diameter approx. 35 mm, approx. 25 kg
Manufacture:JBL
Price: JPY 63,455(pair)Sold Out
- description
- Early model! It is designed so that the mounting frame can be removed. Classic horn “beehive” for JBL 1 inch. You can enjoy the sound and atmosphere of old JBL by attaching JBL LE175 or LE85. There is no nameplate on one side (Murakoshi Yoichi) Accessories: none Main specifications: crossover frequency for 1 inch 1200 Hz or more directional 60° (conical) beehive W145 x H145 x D173 mm 1.9 kg
- description
- ※The smell of tobacco remains. Short horns used in 4343 and 4344. It can also be built into an enclosure, but you can hear good sound even if you attach a screwdriver and place it on top of the enclosure. There is a feeling of use such as dirt (Atsushi Takasaki) Accessories: none Main specifications: 80 degrees horizontal and 45 degrees vertical orientation for 1" drivers Recommended crossover 1.2 kHz baffle opening diameter 108 mm depth 216 mm
- description
- The price has been reduced. 2023/3/22 sales price 150,000 yen. A rare wooden sand-filled horn from Onken (Onken) is in stock. It comes with a slot to which Altec or JBL 1-inch drivers can be attached. The material is very carefully made and is moderately soft, so it is rich in expressiveness. You can enjoy warm sound when combined with OS-500MT (Murakoshi Yoichi) Accessories: Transformation Throat Main specifications: wooden sector horn, metal slot, recommended usage frequency band, 500 to 25,000 Hz, compatible unit OS-500MT, W560 x H250 x D420 mm, 6.82 kg
- description
- The price has been reduced. 2023/3/22 sales price 248,000 yen. Comes with stand 2505! 2 inch horn+lens with huge slant plate It is the size and presence of “ghost horn” as it is nicknamed. The echoes of the exponential horn with an elliptical aperture create a natural sound with no particular peculiar features. There is a feeling of use on the exterior, such as JBL stickers attached, slight paint peeling, abrasions, etc. (Murakoshi Yoichi) Accessories: Stay (2505) Main specifications: crossover frequency 800 Hz slot diameter 5 cm dimensions W914 x H305 x D483 mm weight 10.5 kg/1 bottle
Manufacture:GOTO
Price: JPY 68,000(pair)Sold Out
- description
- The price has been reduced! 2023/3/8 sales price 79,800 yen This is a round straight horn with a Goto unit. It had been detonated, and the SG-555TT was attached. There are dead marks that look like the board was attached. (Miura Kimiya) Accessories: no accessories Main specifications: round straight horn for mid and low sounds, total length 600 mm, opening diameter: 400 mm, cutoff frequency: 300 Hz, optimal crossover, 400-500 Hz, material: aluminum, aperture weight: approx. 7 kg
- description
- Disposal prices have been reduced! (Member discounts do not apply) 2023/1/13 sales price 35,000 yen with wooden stand. Altec's representative aluminum die-cast sectoral horn. The wide diffusion characteristics are attractive, and the horn has a core and is easy to listen to. The exterior has stains, stains, and paint deterioration (Tamura Eiji) Accessories: no accessories Main specifications: crossover frequency 800 Hz compatible driver 802-8D, 806-8A, 807-8A W470 x H220 x D340 mm 4.1 kg
- description
- Bi-radial Horn for JBL 2" Driver Since there is no depth and the opening is large, it makes you hear a light and open sound. It's a horn that's pretty playable because it's not tough, has a mild sound, and is small and lightweight. serial 24840. 25472 There are scratches and a feeling of use on the exterior (Katsutsugu Hiura) Accessories: none Main specifications: bi-radial horn cutoff for 2 inches 400 Hz horizontal 60 degrees vertical 40 degrees throat diameter 5 cm dimensions W445xH279xD236mm weight 2.2 kg (1 piece)
Manufacture:EMINENCE
Price: JPY 9,091(pair)Sold Out
- description
- 2" PA horn It's cheap yet well-made, and doesn't make you feel cheap. A JBL 2-inch driver can be mounted. (TAMURA Eiji) Accessories: no accessories Main specifications: throat diameter 2 inches angle 60 degrees ✕ 40 degrees W315 ✕ H185.4 ✕ D154.9 mm weight 2.2 kg/book
- description
- The price has been reduced. 2022/9/12 sales price 12,000 yen throat adapter for MR64. Compatible with 1.5-inch drivers such as the 288 series. There are scrapes around the screw hole on the driver attachment side, and there is an overall feeling of use (Daiki Goto) Accessories: none Main specifications: horn mounting side W100 x H192 mm driver side diameter 130 mm depth 150 mm 1.8 kg
- description
- The price has been drastically reduced. 2022/9/11 sales price 99,800 yen Please enjoy the thick, exciting sound by attaching a 2-inch driver such as a large radial horn 2440 for professional use. The strong sound pressure that comes out straight through is impressive. It is also recommended as an introduction to large horns. The exterior has a feeling of wear over time, such as bumps, paint peeling, etc. (Fujisawa Yukishi) Accessories: none Main specifications: 2350: crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 x H615 x D215 mm 11.3 kg/book
- description
- Comes with a self-made wooden horn. This is a slot for the M-100 driver unit. There are scratches and dirt on the exterior and there is a feeling of use (Mizusaki Ryo) Accessories: none Main specifications: W210 x H100 x D250 mm weight 1 kg
- description
- The price has been reduced. An Altec green horn that sold for 2023/1/30 is 45,000 yen and was also used in the early A7. The wide diffusion characteristics are attractive, and the horn has a core and is easy to listen to. There is a lot of dirt, paint peeling, and rust on the exterior (Katsutsugu Hiura) Accessories: none Main specifications: recommended crossover frequency 800Hz directional/horizontal 90°, vertical 40° W476 × H219 × D343 mm weight 4.1 kg/book
- description
- The price has been reduced. 2022/11/16 Sales price 39,800 yen*The exterior is dead with petil sheets, but the current situation is. The large horn of the electro voice sounds clean and open, and you can enjoy the unique three-dimensional effect of vocals, etc. It is a convenient specification that allows a JBL 2-inch screwdriver to be attached. There is a feeling of use on the exterior, stains, abrasions, etc. (Kobayashi Hitoshi) Accessories: none Main specifications: 2 inch radial horn driver, mounting part, outer diameter, 128 mm, slot diameter, 50 mm, screw pitch (diagonal), 102 mm, W712 x H334 x D434 mm, approx. 3.8 kg
- description
- ※It is inexpensive because it has dead marks. A short horn used in the 43 series. It can also be built into an enclosure, but you can hear good sound even if you attach a screwdriver and place it on top of the enclosure. On the exterior, tape marks are conspicuous. Serial 55128/55468 (Tamura Eiji) Accessories: no accessories Main specifications: 80 degrees horizontal and 45 degrees vertical orientation for 1" drivers Recommended crossover 1.2 kHz baffle opening diameter 108 mm depth 216 mm
- description
- The price has been drastically reduced. 2023/1/19 sales price 398,000 yen with driver stand! A 2-inch special horn machined out of wood by Tematsu Sound Works. The natural sound that stretches smoothly even on high frequencies with good sound that can only be obtained with this horn is amazing. Compatible with JBL 375/376/2440/2441/2450/2446, TAD TD-4001 TD-4003 (Fujisawa Yukishi) Accessories: self-made stand Main specifications: SH maple urethane colored paint finish, 2 inch driver unit, directivity 70 degrees horizontal x 50 degrees vertical, recommended crossover 500 Hz or more, measured external dimensions W650 x H290 x D600 mm, measured weight 25 kg
Manufacture:不明
Price: JPY 30,727(pair)Sold Out
- description
- Disposal prices have been reduced! (Member discounts do not apply) 2022/9/15 sales price 79,800 yen Exponential horn with unknown details. It is similar to JBL 2343, but the size is slightly different. Of course, JBL's 2-inch drivers can be mounted. The exterior has paint peeling and dullness. (TAMURA Eiji) Accessories: no accessories Main specifications: W333 x H182 x D250 mm weight 3.3 kg/book (actual measurement)
- description
- The price has been reduced. 2022/8/28 sales price 10,000 yen for 1 bottle only. Unspecified TOA metal horn. There is a 1959 stamp on the plate. There is discoloration in the horn opening (Sasaki Shota) Accessories: nothing Main specifications: throat hole diameter approx. 34 mm, horn opening approx. W413 x H118 mm, W440 x H140 x D385 mm, 3.7 kg (actual measurement)
Manufacture:ALTEC
Price: JPY 13,636(only one piece)Sold Out
- description
- ※1 bottle only. Altec 1" Mantalay Horn Since it has a wide range, it is suitable for 2 ways with a woofer. The exterior is dull and dirty (Kimiya Miura) Accessories: no accessories Main specifications: frequency band 500Hz~15000Hz Recommended crossover: 500Hz horizontal 90° vertical 40° W580×H325×D320mm 3.6 kg
- description
- Inexpensive because it is a modified product. JBL 2 inch to 1 inch conversion throat A self-made attachment is attached to the 1 inch side. The diameter of the threaded part is 40 mm by actual measurement. The cork sheet is peeling off on one side (Oikawa Tetsuji) Accessories: none Main specifications: opening 2 inch side 49 mm/1 inch side 25 mm W120 x H105 mm approx. 0.5 kg
Manufacture:JBL
Price: JPY 45,273(pair)Sold Out
- description
- The price has been reduced. 2021/10/20 sales price 99,800 yen JBL exponential horn. Emphasis is placed on horizontal directivity. Despite its small size, it boasts an excellent sound pressure level. There are scratches, stains, paint peeling, etc. throughout. Serial 11497 11516 (Kondo Hirotsugu) Accessories: none Main specifications: slot diameter 50 mm screw hole approx. 7 mm screw hole diagonal 102 mm dimensions W346 x H162 x D305 mm weight 3.9 kg
- description
- The price has been drastically reduced. 2022/12/24 Sales Price 140,000 yen Released for the first time in a long time! This is ALTEC's super large mantarey horn. It comes with a 34495 throat adapter. The wide range of directivity and the color luster that can only be achieved with this horn will captivate ALTEC fans. There is some detaining peeling on the back of one side (Yoichi Murakoshi) Accessories: none Main specifications: directionality/horizontal 90 degrees, vertical 40 degrees, slot diameter 36 mm, size W864 x H610 x D711 mm, weight 12.7 kg
- description
- The price has been drastically reduced! 2022/12/4 sales price 39,800 yen Altec 1 inch mantalay horn. The range is wide, so 2-way is compatible with woofers. The exterior is a good pair with no major damage. There is a feeling of use on the exterior such as small scratches and dullness (Tomonori Asae) Accessories: none Main specifications: frequency band 500Hz~15000Hz recommended crossover 500Hz horizontal 90° vertical 40° compatible unit 288 290 291 299 dimensions W580 x H325 x D320 mm weight 3.6 kg
- description
- ※Only 1 seal is missing. Altec's representative aluminum die-cast sectoral horn. The wide diffusion characteristics are attractive, and the horn has a core and is easy to listen to. There is a feeling of use such as dullness and small scratches (Fujisawa Koshi) Accessories: none Main specifications: crossover 500Hz directional horizontal 90 x vertical 40 slot diameter 250 mm W600 x H270 x D486 mm 6.7 kg
- description
- A large wood horn made of laminated Mizume cherry wood. It's well-made and just so big and heavy! If you combine it with a highly rigid woofer system, you can enjoy a thick, rich sound. It's a horn with plenty of presence. The exterior has small scratches, line marks, etc., and the serial number on one side has disappeared (Oikawa Tetsuji) Accessories: none Main specifications: Compatible units TAD4001, JBL2441, 2445J, Yale 7550DE, etc. Recommended crossover 400 Hz horn section cutoff frequency 280 Hz directionality 90 degrees/vertical 40 degrees, slot diameter 49 mm 40.2 kg
- description
- The price has been reduced! 2022/11/27 Sales price 15,000 yen This is a well-built sectoral horn. There is relatively little noise and the impression is that it makes you listen to the sound straight. The exterior has dullness and stains (Kimiya Miura) Accessories: There are no accessories Main Specifications: Sectoral Horn Cutoff Frequency 600Hz Opening W300 ✕ H90mm Throat Diameter 25.4mm Compatible Units FD600/D232/D252/D221, etc. Light Alloy Diecast W330 ✕ H120 ✕ D230 mm Weight 1.6 kg
- description
- 1" wood horn with unknown details. It seems that drivers such as JBL, ALTEC, TAD, etc. can be used. Overall there are scratches, dents, etc. (Tetsuji Oikawa) Main specifications: W696 × H128 × D504 mm 11.6 kg (actual measurement)
- description
- *Sold as is. Compact radial horn. A JBL compression driver with a 2.5 cm throat diameter can be attached. It is made of die-cast aluminum and is coated on the outside with a special dumping agent Lansa Plus to prevent resonance. There is appearance, dullness, abrasions, and paint peeling (Hitoshi Kobayashi) Accessories: none Main specifications: Directivity (horizontal x vertical) 90 × 40 crossover frequency 800 Hz W584 × H140 × D394 mm 9.1 kg
- description
- Prices have been reduced. 2022/9/2 sales price 79,800 yen*It is cheap because it is painted black and there are uneven paint, paint peeling, and scratches. Attach a 2" driver, such as a large professional radial horn 2440, and enjoy the thick, exciting sound. The powerful sound pressure that comes straight out is a masterpiece. It is also recommended as an introductory machine for large horns (Wang Zhan) Accessories: none Main specifications: crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 × H615 × D215 mm 13.8 kg/book 11.3 kg
- description
- Disposal prices have been reduced. Member prices are not applicable. 2019/4/27 sales price 200,000 yen for 1 bottle only. The Western Electric 555 was originally mounted. Made of iron plate. It is a curl horn type with a beautiful curve. The exterior is dirty and dull (Wang Zhan) Accessories: none Main specifications: W533 × H970 × D395 mm 16.35 kg (actual measurement)
- description
- Disposal prices have been reduced! (Member discounts do not apply) 2022/11/5 sales price 19,800 yen 288 etc. It is an ALTEC 1.5-inch horn. The sound has vertical momentum, and although it is not a wide range, the sound with a sense of energy is excellent. There is a feeling of use, such as small scratches on the whole (Morning Inachi Law) Accessories: none Main specifications: Manta Ray Horn Polyester Fiberglass Recommended Crossover 500Hz Compatible Unit/288/291 Series W324 x H327 x D317 mm 1.6 kg
Manufacture:不明
Price: JPY 22,545(pair)Sold Out
- description
- Disposal prices have been reduced! (Member discounts are not applicable) 2022/9/15 Sales price 79,800 yen Exponential Horn with unknown details. It's similar to JBL 2343, but the size is slightly different. Of course, JBL 2-inch drivers can be mounted. The exterior has paint peeling and dullness. (Tamura Eiji) Accessories: There are no accessories Main specifications: W333 x H185 x D250 mm Weight 3.3 kg/bottle (actual measurement)
Manufacture:JBL
Price: JPY 63,455(pair)Sold Out
- description
- Early model! It is designed so that the mounting frame can be removed. “Honeycomb” is a standard horn for JBL 1 inch. You can enjoy the sound and atmosphere of old JBL by attaching a JBL LE175 or LE85. Just looking at the thick and heavy frame, the beauty of the shrinkage paint, and the design of the initial printed emblem will make you happy. There are abrasions on the print (Murakoshi Yoichi) Accessories: mounting screws Main specifications: Crossover frequency for 1 inch 1200 Hz or more directivity 60° (cone) beehive W145 x H145 x D173 mm 1.9 kg
Manufacture:不明
Price: JPY 5,455(pair)Sold Out
- description
- Disposal prices have been reduced! (Member discounts do not apply) 2022/8/24 Sales price 10,000 yen Hornthroat with unknown details. Originally, the YL 555 was mounted. The exterior has paint peeling and paint stains. (Tamura Eiji) Accessories: There are no accessories Main specifications: W70 x H167 x D70 mm dead weight 506 g/book
- description
- A compact and lightweight flat front bi-radial horn. It is useful for keeping horizontal characteristics constant and correcting driver characteristics. It is a horn that stretches well in the middle range, making it difficult to feel noisy in the high range. Suitable for slightly smaller systems (Fujisawa Yukishi) Accessories: none Main Specifications: Throat Diameter 25mm Compatible Driver 2426H/J Use Minimum Frequency 500Hz Recommended Minimum Crossover Frequency 630Hz High Density Polyurethane W448 x H173 x D174mm 1.4 kg
- description
- Light alloy straight horn Suitable for making 2-way systems using wideband woofers. The exterior has a feeling of use such as scratches and dullness (Tomonori Asane) Accessories: none Main Specifications: Throat Diameter 2.54 cm Material Aluminum Alloy Baffle Opening Diameter 9.4 cm External Dimensions Diameter 120 x Depth 175 mm
- description
- The price has been drastically reduced. 2022 11/9 sales price 248,000 yen with stand 2505! 2 inch horn+lens with huge slant plate As nicknamed “Obake Horn,” it has the same size and presence. The sound of an exponential horn with an elliptical opening creates a natural sound with no habit. The exterior has a feeling of use, such as paint peeling, abrasions, etc. (Kobayashi Hitoshi) Accessories: 2505 stand Main specifications: Crossover frequency 800 Hz throat diameter 50 mm W914 x H305 x D483 mm weight 10.5 kg/book (without stand)
- description
- A combination of a 2 inch driver horn+acoustic lens for use in close-range PAs and monitors. It makes 2441, 2440, etc. sound sharp. It is recommended for those who find that the radial horn makes too much noise. *There is a 20mm thick wooden spacer between the throat and horn (Sasaki Shota) Accessories: none Main specifications: Directional horizontal 100° x vertical 45° throat diameter 51mm crossover frequency 800Hz 5.2 kg (actual measurement)
- description
- The price has been reduced. 2022 9/7 selling price 35,000 yen for 1 bottle only. This is a rare throat for low frequency drivers with YL acoustics. Details are unknown, but I think it's probably the throat that came with the YL driver at the time (Fujisawa Yukishi) Accessories: none Main specifications: W140 × H140 × D465 mm 3.5 kg (actual measurement)
- description
- The price has been reduced. A Fostex double throat adapter with a selling price of 39,800 yen on 2022 6/24. Compared to connecting a single screwdriver, you can get a much greater sense of energy when extruding. The mid-range becomes thicker and you can expect a rich tone. There are no noticeable scratches (Sasaki Shota) Accessories: none Main Specifications: Double Throat Adapter Horn Mounting Surface Diameter 200mm Horn Mounting Surface Hole Diameter 50mm Driver Mounting Part Diameter 100mm Screwdriver Mounting Screws 4 Holes Diagonal 75mm Weight 1.4 kg (actual measurement)
- description
- Not to mention FOSTEX drivers, this woodhorn is compatible with JBL 1-inch drivers (3-point stop). It is a horn characterized by its expansive sound unique to wood horns, which is different from metal horns (Fujisawa Yukishi) Accessories: none Main Specifications: Cutoff Frequency 420 Hz Throat 2.54 cm Birch Parallel Plywood W444 x H90 x D293 mm
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
