The price has been reduced. This is an ALTEC 1.5-inch horn with a sales price of 20,000 yen 288 etc. for 2022 4/5. The sound has vertical momentum, and although not wide range, the energetic sound is excellent. Overall, there is a feeling of use such as small scratches (Itsuro Mizushima)
Accessories: none
Main Specifications: Mantalay Horn Polyester Fiberglass Recommended Crossover 500Hz Compatible Unit/288/291 Series W324 x H327 x D317mm 1.6kg
The price has been reduced. 2022 6/5 sales price 39,800 yen with a self-made enclosure! Altec's representative die-cast aluminum sectional horn. The horn is attractive because of its wide diffusion characteristics, and has a core that is easy to listen to. There is a feeling of use such as dullness and small scratches (Mizusaki Ryo)
Accessories: none
Main specifications: Crossover frequency 800Hz compatible driver 802-8D, 806-8A, 807-8A W524 × H237 × D370mm 10.5kg (including enclosure)
Disposal prices have been reduced. Member discounts are not applicable. The 2022 3/2 sales price of 1,000,000 yen is a masterpiece! The WE15A replica is in stock. The vortex structure, which was assembled to fully emit the sound of the WE555 driver that any enthusiast admires, is at a level that can be called a work of art when you look at it seriously! Although it is a wooden replica, it is very well built and has a neat finish. The exterior and the feeling of use such as paint removal etc. can be seen in some places (Kobayashi Hitoshi)
Accessories: none
Main specifications: driver mounting opening diameter 35 mm size actual size W1425 x H1425 x D1900 mm 52 kg (actual measurement)
The price has been reduced. 2022 7/11 sales price 99,800 yen Please enjoy the thick, exciting sound by attaching a 2-inch driver such as a large professional radial horn 2440. The powerful sound pressure that comes straight out is a masterpiece. It is also recommended as an introduction to large horns. There are scratches and paint baldness (Oikawa Tetsuji)
Accessories: none
Main specifications: crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 x H615 x D215 mm 13.8 kg/book 11.3 kg
The price has been reduced. 2022 4/13 sales price 39,800 yen Altec classic horn 511B. This is a 1-inch 4-second horn. You can enjoy sharp horn sounds unique to ALTEC with your favorite 1-inch driver, such as 802-8D (Fujisawa Yukishi)
Accessories: none
Main Specifications: Crossover 500 Hz Directional Horizontal 90 x Vertical 40 Throat Diameter 250 mm W600 x H270 x D486 mm 6.7 kg
The price has been reduced. 2022 7/23 Selling price 40,000 yen An unknown model horn with a throat 34656 for 2-inch drivers by Altec. An electric seal is affixed to the horn part that looks like the MR94B is cut in half. Like the original mantalay, it is lightweight and easy to set up. There is dullness and a feeling of use throughout (Murakoshi Yoichi)
Accessories: none
Main specifications: 2 inch throat 34656+ mantalay horn W410 x H370 x D520 mm 5.2 kg throat hole φ37 mm between screw holes 71 mm
The price has been reduced. 2022 9/2 selling price 10,000 yen A short horn with unknown details. The driver attachment part is a double screw type with a slightly different one. I didn't get attached to the YL driver. It is deadened with a rubber plate, and there is a lot of feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: horn opening 323 x 86 mm throat inner diameter 34 mm external dimensions W361 x H122 x 275 mm
The disposal price has been reduced! (Member discounts are not applicable) 2022 8/13 Sales price 39,800 yen Altec standard 4 second horn for 1 inch. You can enjoy sharp horn sounds unique to ALTEC with your favorite 1-inch driver, such as the 802-8D. The exterior has oxidation, scratches, and stains. Serial 88057/88981 (Tamura Eiji)
Accessories: There are no accessories
Main Specifications: Crossover 500 Hz Directional Horizontal 90 x Vertical 40 Throat Diameter 250 mm W600 x H270 x D486 mm 6.7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2022 9/18 Sales price 350,000 yen with a dedicated stand! Commonly known as the honeycomb horn, it is deeply popular among enthusiasts. The luster and energy of the mid-range when the 375 is attached is exceptional. The exterior has dullness, paint peeling, and floats. Serial 10427/10476 (Satoshi Yoneshima)
Accessories: There are no accessories
Main Specifications: Crossover 500Hz Throat Diameter 50mm Lens Diameter 343mm Depth Dimensions 400mm Approx. 15kg
The disposal price has been reduced! (Member discounts are not applicable) 2022 7/16 Sales price 69,800 yen Round straight mid-high range horn. The exterior has a feeling of use such as scratches, dullness, etc. Also, deadening has been applied. (Asane Tomonori)
Accessories: none
Main specifications: Round straight horn for midrange, material, aluminum aperture, total length, 165 mm, aperture, 145 mm, cutoff frequency, 800 Hz, optimal crossover, 1 to 1.2 kHz
The price has been reduced. A compact radial horn with a sales price of 49,800 yen on 2022 7/30. A JBL compression driver with a 2.5 cm throat diameter can be installed. It is made of die-cast aluminum and coated with a special dumping agent Lancer Plus on the outside to prevent resonance. There are scuffs on the exterior, paint peeling, white paint applied to the edges, and abrasions (Kobayashi Hitoshi)
Accessories: none
Main specifications: directivity (horizontal × vertical) 90 × 40 crossover frequency 800 Hz W584 × H140 × D394 mm 9.1 kg
Aiden 1" aluminum radial horn There are bald paint, small scratches (Oikawa Tetsuji)
Accessories: none
Main specifications: W290 × H140 × D225 mm 1.6 kg (actual measurement)
Technics rare scorpion horn driver does not come with a Pioneer screwdriver horn, a horn that is one size larger than the PM-101. There are scuffs, bruises, and paint peeling throughout. One side of the label is missing. (Yosuke Kojima)
Accessories: none
Main specifications: Outer diameter W492 × H312 × D360 mm throat inner diameter approx. 28 mm 5.8 kg/unit
* Currently sold item. A domestic horn for 1 inch that is very similar to the ALTEC/511B in appearance and specs. It is a sectoral horn with high radiation efficiency. There is dullness and dirt (Yosuke Kojima)
Accessories: none
Main Specifications: Sectoral Horn Crossover 500Hz Directional Characteristics Horizontal 90 Degrees/Vertical 40 Degrees Throat Diameter 25.8mm Compatible Driver HFD-351 Compatible Adapter HYS-051 W593 × H270 × D470mm 9.5kg/book
Double throat for JBL 2" By attaching two 375 or 2440 drivers, the sense of energy increases. You can experience the feeling that energy is strong and comes forward. It is recommended for those who want to increase the expressiveness of the middle range. Horns can be used with JBL 2350/2355, etc. (Shota Sasaki)
Accessories: none
*It's cheap because it's only one bottle. Double throat for JBL 2" By attaching two 375 or 2440 drivers, the sense of energy increases. There is only one, so it's a must for mono people. Horns can be used with JBL2350/2355, etc. There is dullness and paint peeling (Shota Sasaki)
Accessories: none
The price has been reduced. 202/9/10 Selling price 110,000 yen An exponential horn adopted in the speaker system “Paragon,” which represents the company. Focus on directivity in the horizontal direction. Despite its small size, it boasts an excellent sound pressure level. In appearance, there are abrasions, connection marks. Serial 13690/13691 (Katsuji Hiura)
Accessories: none
Main specifications: Throat diameter 50 mm Screw hole approx. 7 mm Screw hole diagonal approx. 102 mm External dimensions W346 x H162 x D305 mm Weight approx. 3.2 kg/book
Horn of unknown details. JBL2410 etc. can be installed for 1 inch (Oikawa Tetsuji)
Accessories: none
Main specifications: Diameter 184mm Height 236mm 1.4kg (actual measurement)
Details are unknown, but it is a carefully crafted wood horn for 1-inch drivers. Originally, TOA's HFD-352 was mounted. The appearance is dull, and there are small scratches. * There is a screw hole on the side (Wang Zhen)
Accessories: none
Main specifications: W642 × H115 × D405 mm Weight 7.6 kg
The price has been reduced. 2022/8/27 selling price 12,000 yen A short horn of unknown manufacturer that can be attached to a 1-inch driver of JBL. Deadening has been applied to the metal body to make a sound skip. There is a lot of feeling of use (Hitoshi Kobayashi)
Accessories: none
Main specifications: W380 × H164 × D280 mm
There is only one bottle. With throat adapter HA21 (JBL/ALTEC compatible) (Koshihama Yasuhito)
Accessories: none
Main specifications: Sectoral horn cutoff 250Hz opening W608 × H248 mm W700 × H320 × D500 mm
It is a sectoral horn with a solid structure. I have the impression that there is relatively little noise and it makes me listen to the sound straight. Scratches, dullness, dirt, etc. stand out (Daiki Goto)
Accessories: none
Main specifications: Sectoral horn cutoff frequency 600Hz aperture W300 ✕ H90mm throat diameter 25.4mm Compatible unit FD600/D232/D252/D221, etc. Light alloy die Cast W330 ✕ H120 ✕ D230mm Weight 1.6kg
An external brass horn that can be used for JBL 075, 2405, 077, etc. Please enjoy the change in sound and appearance that changes drastically with the horn (Fujisawa Yukishi)
Accessories: none
Main specifications: weight kg/piece
4 cellahorns for Maxonic's 511 and 512! Can also be used for Altec 1-inch drivers, etc. (Shota Sasaki)
Accessories: none
Main specifications: Compatible drivers D511A, D511EXMK2, D512EXMK2 Recommended Crossover 500Hz Directivity 90°/45° (Horizontal/Vertical) W545 × H240 × D470mm 6.8kg
This is a 1 inch throat for Raftcraft. I was able to install a 1-inch driver from JBL and ALTEC. The exterior is scratched, and the paint is bald. (Ryo Mizusaki)
Accessories: none
Main specifications: W132 × H115 × D180 mm 1.3 kg/1 bottle
The disposal price has been reduced! Member prices are not applicable. 2022/8/9 selling price 198,000 yen A horn for 2 inches using laminated Eastern oak lumber. The natural, moisturized sound is attractive. Please enjoy it with the TAD TD-4001, JBL2440, etc. There is a scratch on the back of the horn part on one side (Oikawa Tetsuji)
Main Specifications: Eastern Oak Finish 588 x 191 x 328 Diffraction Horn Recommended Crossover Frequency: 700 Hz Directivity: Horizontal 110° Vertical 40° W585 x H191 × D328mm 9.6kg
The price has been reduced! 2022/4/13 selling price 39,800 yen Altec classic horn 511B. This is a 4-sectoral horn for 1 inch. You can enjoy the sharp horn sound unique to ALTEC with your favorite 1-inch driver such as the 802-8D (Fujisawa Yukishi)
Accessories: none
Main specifications: Crossover 500 Hz Directivity Horizontal 90 × Vertical 40 Throat Diameter 250 mm W600 × H270 × D486 mm 6.7 kg
A sectoral horn adopted in the model3401 speaker system. You can enjoy the rich sound and expansive tone made of aluminum and birch plywood. I will see small scratches scattered (Fujisawa Yukishi)
Accessories: none
Main specifications: Reciprocating flare horn cutoff frequency 350 Hz Recommended crossover frequency 900 Hz or more Throat opening hole diameter Φ25.4 mm Baffle opening size W184 × H102 mm W220 × H120 × D220.2 mm 1.68 kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/6/10 Selling price 89,800 yen Raft Craft's 2-inch throat is mounted on JBL's professional large radial horn. Of course, the JBL can be mounted as it is. A radial horn with a straight sound and a profound way of sounding with a moderate spread. Please try the sound with good sound skipping that was also used for large output outdoor use. The exterior has been repainted, and there is a slight stickiness and paint peeling off. Serial 11462/11474 (Eiji Tamura)
Accessories: No accessories
Main specifications: Radial horn crossover 500Hz for 2 inches Directivity: horizontal 60° x vertical 40° W613 × H203 × D508mm 9.5 kg/1 bottle
Honeycomb Horn for 1" Driver It is recommended for those who use JBL LE175 and LE85. There is dullness and peeling. Serial 4823 4876 (Asaine Tomoho)
Accessories: none
Main specifications: Crossover frequency 1200 Hz recommended directivity 60 degrees (cone) horn total length 171 mm Compatible unit LE175 LE85
The disposal price has been reduced! (Member discounts are not applicable) 2022/5/29 Selling price 39,800 yen Altec standard horn 511B. This is a 4-sectoral horn for 1 inch. You can enjoy the sharp horn sound unique to ALTEC with your favorite 1-inch driver, such as the 802-8D. * Overall, it has a slightly shiny finish. The name plate is missing. The exterior has small scratches and dullness. (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Crossover 500 Hz Directivity Horizontal 90 × Vertical 40 Throat Diameter 250 mm W600 × H270 × D486 mm 6.7 kg
* It is inexpensive because there are many scratches. JBL 2 inch screwdriver wooden horn Originally designed only for concert halls, it is a horn that spreads the sound over a wide area without difficulty. Since it is made of wood, it echoes a warm and soft tone that is different from metal. (Ryo Mizusaki)
Accessories: none
Main specifications: Directivity 140 degrees × 60 degrees (horizontal × vertical) crossover frequency 800 Hz W660 × H95 × D340 mm Weight 4.4 kg
* It is painted black and is inexpensive because there are paint unevenness, paint peeling, and scratches. Attach a 2-inch driver such as a professional large radial horn 2440 and enjoy a thick, exciting sound. The powerful sound pressure that goes straight is a masterpiece. It is also recommended as an introductory machine for large horns (Tetsuji Oikawa)
Accessories: none
Main specifications: Crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 × H615 × D215 mm 13.8 kg/book 11.3 kg
There is no label on one side, so it is cheap. bi-radial horn for JBL 2" drivers Because there is no depth and the opening is large, it makes you listen to a light and open sound. It is a horn that can be played quite a bit because it is small and lightweight with a mild sound without tightness (Oikawa Tetsuji)
Accessories: none
Main specifications: bi-radial horn cutoff for 2 inches 400Hz horizontal 60 degrees vertical 40 degrees throat diameter 5cm dimensions W445xH279xD236mm weight 2.2kg (1 bottle)
Morning glory shaped wooden straight horn designed and manufactured with hyperbolic curves. Three screw holes inside the mount fits Altec 2" screwdrivers. (The 4 screw holes on the outside are unknown. (The JBL could not be installed.) By using wood as the material, it reproduces the soft singing voice that cannot be obtained with a metal horn, and the plump sound of the body of a stringed instrument. The exterior has abrasions, dullness, and a feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: Opening diameter 415 mm x total length 455 mm Weight 1.5 kg Screw hole 34 mm Screw hole diagonal 72 mm
The disposal price has been reduced. Not applicable to member discounts. 2022 7/3 selling price 250,000 yen YL acoustic ghost horn in stock for the first time in about 10 years! It is a model for the company's mid-low range driver D-75000. Several screws and nuts at the joint are missing* Shipping costs will be estimated separately (Tetsuji Oikawa)
Accessories: none
Main Specifications: Cutoff 70Hz Crossover 130Hz to 500Hz Please use it. Horn opening outer dimensions W970xH670mm W970xH2070xD700mm 26.65kg (actual measurement)
A small horn from an electro voice. Come to the company's drivers DH2T and DH2010A. There is dullness and small scratches (Shota Sasaki)
Accessories: none
* It is inexpensive because the paint deteriorates. Compact and lightweight flat front bi-radial horn. It helps to keep the horizontal characteristics constant and to correct the characteristics of the driver. It is a horn that stretches well in the middle range and makes it difficult to feel noisy in the high frequencies. It is suitable for slightly smaller systems (Tetsuji Oikawa)
Accessories: none
Main Specifications: Throat Diameter 25mm Compatible Driver 2426H/J Use Minimum Frequency 500Hz Recommended Minimum Crossover Frequency 630Hz Made of High Density Polyurethane W448 x H173 x D174 mm 1.4kg
The price has been reduced! 2022/7/8 selling price 69800 yen Round straight mid-high range horn. It is originally used at 1.2 kHz or higher, but since it is a hyperpolytic curve, it is also possible to use it at 1 kHz. The exterior has dullness and some dust accumulated. Deadening has also been applied (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Cutoff frequency 600Hz Optimal crossover 1kHz to 1.2kHz Total length 232mm Opening aperture 180mm
* A chain is attached to prevent it from falling. Morning glory type straight horn. The throat part of the horn is made of cast aluminum, and the flare part is welded with an iron plate. * Overall, deadening has been performed. The exterior has a dull stain. (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Crossover: 220 to 300 Hz Cutoff: 175 Hz Aluminum casting 610 × 1145 mm
This is a horn for 1" drivers. It is compatible with drivers such as JBL, ALTEC, TAD, etc., and the screw holes are also made together, making it very easy to use. It seems to be made from laminated wood blocks from Asada cherry blossoms, and the spread of sound is outstanding. Overall scratches are noticeable (Daiki Goto)
Accessories: none
Main specifications: W447xH265xD140mm 5.7kg
A rare item! Sony's commercial ghost horn made during the bubble period! It is not flattering that the opening area is bigger and easier to handle than ALTEC's H1505 or VITAVOX's CN129, but I would like to build a system that incorporates this horn with an outstanding presence . There are small scratches, dirt, etc. corresponding to the year ※ Shipping fee will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: throat diameter 500mm (2 inches) W1001 x H753 x D700mm 23kg
Straight short horn for 1" driver It is a standard model that has been used in various speakers and has been used for a long time. The exterior has paint peeling and dirt on the whole. Serial 37095 40276 (Nobuyuki Takahashi)
Accessories: None
Main specifications: Directional characteristics 90° (horizontal) /45° (vertical) Throat diameter 2.5cm Crossover frequency 500Hz or more Horn total length 216mm 1.1kg/1
The price has been reduced. 2021/12/7 selling price 15,000 yen rare Yamaha horn throat. Used when attaching a JA-4270 driver to the company's H-1230 horn (Yoichi Murakoshi)
Accessories: instruction manual, original box
Main specifications: Driver side diameter 75mm Horn side dimensions 130×110mm
The price has been reduced. 2022/6/7 selling price 39,800 yen Electro voice horn for 2 inches. It is made of resin and is not as tough as metal, so you can listen to a sound with a good three-dimensional effect. It is a convenient specification that allows you to install a 2-inch JBL screwdriver. The appearance is scratched and dirty (Katsuji Hiura)
Accessories: None
Main specifications: 2 inch horn driver directional/horizontal 90° (500-20kHz) vertical 40° (1200Hz to 20kHz) mounting part outer diameter: 128mm (actual measurement) throat diameter: 50mm (actual measurement) screw Pitch (diagonal) 102 mm (actual measurement) W534 × H333 × D278 mm (actual measurement) 3.0 kg (actual measurement)