※It is cheap because it is in poor condition. FOSTEX Speaker Network Capacitors Set of 2 (Tomoho Asaine)
Accessories: none
Key Specifications: 1.5μF capacitance
Fostex attenuator. It is an easy-to-use attenuator that allows you to easily change the volume on the high frequency side of multi-systems, etc. The exterior is good (Hitoshi Kobayashi)
Maintenance information:2023.6.14 sound output confirmed
Accessories: instruction manual
Main specifications: impedance 8 ohms, attenuation of 0 to 40 dB or more, input 100 W (Mus.), shaft effective length 30 mm, W50 x H50 x D71 mm, 0.1 kg
Comes with an original box Brass tweeter stand for the company T900A, T925A and T90A. Stably place the tweeter on top of the speaker system (Shota Sasaki)
Accessories: original box
Main specifications: Brass W64 × H19 × D91mm 475g/1 unit
FOSTEX condenser. If you prefer clear, speedy sound, please go ahead. The exterior, dullness, and the exit line on one side OUT is slightly short (Kobayashi Hitoshi)
Maintenance information:2023.6.14 sound output confirmed (5khz ~)
Accessories: none
Main specifications: capacity 0.22 μF voltage resistance 120/240 (VAC/VDC) body width dimensions 37 mm body diameter (Ø) mm13, drawer line length 80 mm each
Comes with original box. Genuine Fostex speaker grille It is made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (Tetsuji Oikawa)
Accessories: original box, instruction manual
Air core coil for networks by FOSTEX There are solder marks on the exterior (Satoshi Yonejima)
Maintenance information: 2021.12.25 continuity confirmed
Accessories: original box
Main specifications: Inductance 3.5mH
Copper/air core L coil How about making a network (Murakoshi Yoichi)
Maintenance Information: 2023.6.19 Continuity Confirmed
Accessories: none
Key Specifications: 3.5mH capacity
Comes with original box. Genuine Fostex speaker grille It is made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (Tetsuji Oikawa)
Accessories: original box, instruction manual
This is a genuine standard weight for the FR-64S, which is rarely available as a single item. It is essential for those who have lost it and those who only have option weights (Murakoshi Yoichi)
Accessories: none
Main specifications: 227g
Choke Transformer Sold 1 Piece USA Made 10H/100mA DC Resistance 268Ω (Actual Measurement 250Ω) W75×H95×D66mm Approx. 1.3 kg (Measured, Not Including Protrusions) (Yosuke Kojima)
Accessories: None
Line transpair sale Primary: 200-600Ω Secondary: 600Ω W75 × H71 × D43mm Approx. 0.7kg/piece (actual measurement, not including protrusions) Judged as TN-2A from specifications, FUJI transformer's It has a badge, but it is the same product as Tamura made with wiring diagram (copy) (Yosuke Kojima)
Accessories: wiring diagram (copy)
Line matching transparent pair sold primary: 600 ohms, output 10 dBm, frequency range 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, is Tamura's OEM specification (Yosuke Kojima)
Accessories: none
Disposal prices have been reduced! (Member discount does not apply) 2023/8/26 sales price 2,000 yen how about a rubber type woofer edge pair DS-600Z, etc. The exterior is generally good (Asaina Satoshi method)
Accessories: water-based bond brush
Main specifications: Overall edge diameter 247 mm Edge roll outer diameter 226 mm Cone diameter 190 mm Edge inner diameter 179 mm
PSE standard product UL standard FURUTECH inlet plug is a non-magnetic design using gold-plated copper screws and stainless steel parts (Mizusaki Ryo)
Accessories: none
PSE standard product UL standard FURUTECH inlet plug is a non-magnetic design using gold-plated copper screws and stainless steel parts (Mizusaki Ryo)
Accessories: none
Full Tech soldered gold-plated AC inlet. All parts are non-magnetic, and gold-plated electrodes are used, and it is an audio grade AC inlet with solder developed in pursuit of the best sound quality (Tamura Eiji)
Accessories: none
The cap part is a ceramic tube type fuse with direct rhodium plated copper alloy for vibration damping effect. Conductors adopt low inductive copper alloy and do not use magnetic material, and α-process treatment (ultra-low temperature treatment & special electromagnetic field treatment) to increase conduction efficiency. You can see scratches on the right side of the exterior from the front of the fuse (Ryo Mizusaki)
Accessories: original box
Main specifications: 5×20mm type inrush current: 1ns/1,500A
Full Tech Soldered Type Rhodium-Plated AC Inlet All parts are non-magnetic, and it is an audio-grade AC inlet that uses rhodium plating for electrode plating. (YONEJIMA Satoshi)
Maintenance Information: 2023.6.11 Confirmation Confirmed
Accessories: none
Main Specifications: Blade: bronze alloy, rhodium plated