Power transformer primary: 100V secondary: 450-400-350V/350mV, 70V/30mA, 230-180V/50mA x 2, 6.3-10V/3.5A x 2, 6.3V/1.5A W148 x H125 x D125 mm approx. 8 kg/pcs (actual measurement, not including protrusions), there is dull discoloration of the paint and minor paint peeling (Kojima Yosuke)
Accessories: none
Output transformer sold 1 piece, single output, 5 W, primary: 7 kΩ, secondary: 4/8/16 ohm, use: 42/6AR5/6F6, etc. W60 x H78 x D63 mm 0.9 kg/piece (actual measurement, not including protrusions) There are scratches and paint peeling (Kojima Yosuke)
Accessories: none
Unused item! (Opened to confirm continuity) Power transformer primary: 100V secondary: 25V/1.5A x 2 W93 x H83 x D83 mm approx. 1.9 kg (actual measurement, including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Unused item! (Opened to confirm continuity) Power transformer primary: 100V secondary: 25V/1.5A x 2 W93 x H83 x D83 mm approx. 1.9 kg (actual measurement, including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Power transformer transistor primary: 100/110/120/130V secondary: 35-25-17.5V/3.5A x 2 W117 x H102 x D108 mm approx. 4.7 kg (actual measurement, not including protrusions) in good condition (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 530-400-250-0-250-400-530V/0.15A 5V/3A x 2 6.3V/3A 7.5V/4.5A x 2 W120 x D113 x H120 mm (maximum) approx. 5.2 kg There are punch marks on the label surface, and there are abrasions and line scratches on the cover surface (Kojima Yosuke)
Accessories: none
Output transparent pair for sale single output 20 w/50 Hz primary: 5 kΩ/7 kΩ secondary: 4/8/16 ohm W90 x H85 x D90 mm approx. 2 kg/piece The drawer line has been cut short (yellow/white/red/gray wire length approx. 7 cm) There are scuffs and paint peeling in places (Kojima Yosuke)
Accessories: none
※Only 1 output transformer, 20 W, primary: 14 kΩ, secondary: 4/8/16 Ω, use: 801A/VT-62, etc. W78 x D67 x H105 mm 2.2 kg/piece (not including protrusions) There are abrasions and bumps in places, and there are line scratches on the nameplate (Kojima Yosuke)
Accessories: none
※ It is inexpensive because it is in poor condition. Power transformer primary: 100V, secondary: 5-6.3V/3A, 6.3V/2.5A x 2, 6.3V/1.2A x 2, 280-250-0-250-280V/AC220mA W105 x H83 x D92 mm approx. 3.7 kg (actual measurement, not including protrusions), no TANGO badge, and scratches, paint peeling, and rust spots (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 35-0-35V/0.3A, 6.3V/0.3A diameter 86 x H44 mm 0.84 kg (actual measurement, not including protrusions) There are abrasions and bumps in places (Kojima Yosuke)
Accessories: none
Power transformer primary side: 100V, secondary side: 35-0-35V/0.6A, 6.6-7.6V/0.5A diameter 86 x H71 mm approx. 1.4 kg (actual measurement, not including protrusions) There is paint float on the entire cover (Kojima Yosuke)
Accessories: none
Cut core transformer for power transformer transistor primary: 100V secondary: 17.5-35-70V/0.16A W53×H65×D53mm 0.6 kg The line length is short only for the green wire (approx. 12 cm) No stop screws, and there are scuffs and line marks all over (Kojima Yosuke)
Accessories: none
※Only 1 output transformer for single output 30W/40Hz primary: 1.6 kΩ secondary: 4-6-8-16Ω primary inductance 8H/maximum 12H, superimposed DC170mA, allowable DC300mA W117 x H104 x D117 mm 5.2 kg There are differences in color and shape of the stop screws, and there are abrasions, scratches, and paint peeling in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 280-250-0-250-280V/70mA, 6.3V/3A, 5-6.3V/2A W68 x H73 x D82 mm approx. 1.9 kg (actual measurement, not including protrusions) There are fine abrasions and bumps (Kojima Yosuke)
Accessories: none
Input transformer pair sold 150-200-300Ω: 100kΩ W44×H65mm 0.24kg/piece (not including protrusions) with original box, there are abrasions and bumps in places (Kojima Yosuke)
Accessories: original box
Main specifications: (actual resistance value between terminals by tester) 1-3:24.0/24.1 Ω, 3-7:17.1/17.2 Ω, 3-8:13.1/13.2 Ω, 4-6:6.21k/6.29 kΩ
Choke transformer 5H/250mA (series), 1.25h/500mA (parallel) W68 x D71 x H91 mm 1.64 kg/piece original box, with TAMURA badge ※ there is no nameplate, and paint is applied to the chassis joint surface, so it is inexpensive (Kojima Yosuke)
Accessories: original box, TAMURA badge
Choke transformer 20H/60mA (maximum 80mA) DC resistance 640Ω (measured 648Ω) W54 x H80 x D69 mm approx. 0.7 kg/piece There is paint deterioration (Kojima Yosuke)
Accessories: none
Input transformer sold 1 piece transformer ratio (primary: secondary) 1+1:0.6 +0.6 primary impedance 4 kΩ (series), 1 kΩ (parallel) primary maximum superposition current DC15mA (primary direct connection) primary inductance maximum B voltage DC1000V winding resistance DC: primary 144 ohm x 2, secondary 43 Ω x 2, W50 x H80 x D54 mm, 0.74 kg with original box (Kojima Yosuke)
Accessories: original box, TANGO badge, specifications (copy)
Main specifications: (resistance value between each terminal according to the tester) 3-5:44.3 Ω, 4-6:44.3 Ω, 8-10:147.6, 9:11:147.9 Ω
Input transformer pair sold 150-200-300Ω: 100kΩ W44×H65mm 0.24kg/piece (not including protrusions) There are abrasions and bumps in places (Kojima Yosuke)
Accessories: none
Main specifications: (measured resistance between terminals by tester) 1-3:23.8/23.7 Ω, 3-7:16.9/16.9 Ω, 3-8:13.1/13.0 Ω, 4-6:6.02 k/6.00 kΩ
Input transformer pair sold 150-200-300Ω: 100kΩ W44×H65mm 0.24kg/piece (not including protrusions) There are abrasions and bumps in places (Kojima Yosuke)
Main specifications: (actual resistance value between terminals by tester) 1-3:23.8/23.7 Ω, 3-7:17.0/16.9 Ω, 3-8:13.2/13.0 Ω, 4-6:6.30/6.31 kΩ
Input transformer pair sold 150-200-300Ω: 100kΩ W44 x H65mm 0.24kg/piece (not including protrusions) in good condition with original box (Kojima Yosuke)
Accessories: original box
Main specifications: (measured resistance between terminals by tester) 1-3:23.3/23.5 Ω, 3-7:16.7/16.7 Ω, 3-8:12.8/12.9 Ω, 4-6:6.29 k/6.29 kΩ
Unspecified tucked hakama. It seems that it can be used in speaker production depending on ideas such as amplifier insulators. If you've been looking for this size, take this opportunity. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W405 × H50 × D260 mm kg
The disposal price has been reduced. Member prices are not applicable. 2025/5/4 HMV sound box with sales price 50,000 yen. The sound output has been confirmed. Please use it as a spare (Oikawa Tetsuji)
Maintenance information: 2025.5.4 operation confirmed
Accessories: none
Chalk transformer pair sale 10h/120mA DC resistance 110Ω (measured 112.3/109.5Ω) W68 x H91 x D71 mm 1.6 kg/piece There are abrasions and dirt adhering in places (Kojima Yosuke)
Power transformer primary: 90/100/110V secondary: 330-250-0-250-330/DC150mA, 5V/3A, 6.3V/3A, 2.5V/3A x 2, 1.3V/3A 6.3V/3A W100 x H140 x D80 mm approx. 3.7 kg (actual measurement) with original box (Kojima Yosuke)
Accessories: original box
Power transformer hammer tone color primary: 100V secondary: 320-280v-0-70V-380V/280V/280mA, 5V/3A, 2.5V-6.3V/5.2A x 2, 6.3V/3A Application examples: 2A3/6B4G/6L6/VT-52, etc. W120 x H120 x D105 mm approx. 5.2 kg (including actual measurement, protrusions) It is inexpensive because there are slightly larger dents on the cover (Kojima Yosuke)
Accessories: none
Choke transformer 5H/300mA DC resistance 52Ω (measured 58.9Ω), lead-out line length 210mm (measured) W76 x H90 x D85mm 2.0 kg, there is a lot of dullness throughout (Kojima Yosuke)
Accessories: none
Choke transformer 0.9 H/260 mA DC resistance 26.0 ohm (actual measurement) choke transformer mounted on A3600, etc. W55 x H71 x D50 mm 0.7 kg (actual measurement, not including protrusions) There is some dirt (Kojima Yosuke)
Accessories: none