Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
Power transformer primary: 100V secondary: 350v-320v-290 v-70v-290 v-320v-350V/DC150mA, 6.3V-2.5V/3A x 2, 6.3V-5V/3A with original box (Kojima Yosuke)
Accessories: original box
Power transformer Orient core primary: 100V secondary: 2.5-6.3V/3A x 3, 5V/3A, 350-320-290-70-290-320-350V/DC170mA W103 x H94 x D86 mm 3.7 kg (actual measurement, not including protrusions) There are minor injuries and line wounds (Kojima Yosuke)
Accessories: none
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
Power transformer 1st order: 100V 2nd order: 220V-200V-180V-180V-220V/DC190ma, 6.3V-2.5V/3A, 6.3V-2.5V/3A, 6.3V-5V/3A, 5V/3A W102 × H77 × D86 mm approx. 3.2 kg (actual measurement, not including protrusions) There are scratches in places on the cover with the original box (Kojima Yosuke)
Accessories: original box
Power transformer used in MQ60 vacuum tube amplifiers Primary: 100V Secondary: 360V/280mA 100V/350mA 60V/70mA CT-6.3 V/2A W104 × H97 x D87 mm approx. 4.3 kg (actual measurement, not including protrusions) (Yosuke Kojima)
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
※Only 1 output transformer push-pull output primary: 4 kΩ Secondary: 4-8-16 Ω W53 × H65 × D69 mm 0.8 kg (actual measurement, not including protrusions) There are paint peeling and rust spots in places (Kojima Yosuke)
Accessories: none
Since it is a custom-made product sold as an input transformer pair, the specifications are unknown, but they are described by hand. Primary: 600 Ω Secondary: 20 kΩ CT The resistance value has been measured with a tester (1-3:20.7 Ω, 2-4:20.7 Ω, 5-7:198.3 Ω, 6-8:198.8 Ω) W78 x H110 x D66 mm approximately 1.6 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Choke transformer 30h/100mA DC resistance 285Ω (actual measurement) W81 x H102 x D69 mm approx. 2.0 kg (actual measurement, not including protrusions) There are some hook scratches (Kojima Yosuke)
Accessories: none
Output transformer sales secondary: 50-100-200Ω x 2 ※ The primary side seems to be 5 kΩ from the model number. The resistance value has been measured by the tester (between P1-P2:141.8 Ω, between P1 (P2) -B: 71.0 Ω, between 0-50 Ω: 8.2 Ω, between 0-100 Ω: 11.5 Ω, between 0-200 ohms: 16.1 Ω) W110 x H150 x D80 mm 3.6 kg/pcs (actual measurement, not including protrusions) There are fine scratches and paint peeling (Kojima Yosuke )
Accessories: none
Power transformer primary: 100V secondary: 6.3V/4A, 6.3-7.5-12V/5A x 2 W105 x H120 x D105 mm approx. 5 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Choke transformer inductance 10H/200mA DC resistance 101.3 Ω (actual measurement) W90 × H105 × D90 mm 3.4 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Power transformer primary: 100V secondary: 7.5-6.3-0-6.3-7.5V/3A (2 circuits) W90 × H121 × D90 mm approx. 3.6 kg (actual measurement, not including protrusions) There is a fine bruise (Kojima (Yosuke)
Accessories: none
Power transformer primary: 95-100V secondary: 250-0-250V/80mA, 780-750-600-400-0-400-600-780V/200mA W130 × H150 × D128 mm approx. 9 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 100V secondary: 6.3V/4A, 7-6.3-5-5-6.3-7V/5A × 2 W130 × H150 × D130 mm 8.1 kg (actual measurement, not including protrusions) There are scratches in places (Yosuke Kojima)
Accessories: none
Output transformer pairs for sale for heavyweight large transformers, primary: 3.5 kΩ, secondary: 4-8-16 ohms, W150 x H185 x D150 mm, 11.2 kg/piece (actual measurement, not including protrusions) there are hook scratches in places (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Line matching transformer pair sale primary side: 600 Ω CT (150 split) secondary side: 20 kΩ CT (5 k split) W77 x H71 x D43 mm approx. 0.55 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none