Victor DTS-2 compatible Replacement needle for DTS-2 and STS-2 Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement Cartridge for Multi Record Player TCE-262P Pack of 3 Operation not confirmed. If you have been looking for one, please take this opportunity (Kanai Hidetsugu)
Maintenance information: There is no compatible device and operation has not been confirmed
Accessories: needle cover, instruction manual
Set of 2 carries a stable potential and a clean signal by covering it with an item plug that plays a role in preventing noise from being mixed in or signal loss. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: length 70mm inner diameter 43mm
The disposal price has been reduced! Member prices are not applicable. 2024/5/25 sales price 128,000 yen Maintained! The successor to the C-220, which was particular about the phono equalizer. Models from the heyday of analog are notable models that focus on records. The deep, authentic sound quality of PHONO with good sharpness is attractive. The exterior is dull and has small scratches. Serial C4X515 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (main volume, balance volume contact cleaning. Compensation center switch disassembly contact polishing contact grease application in the sealing door. Electrolytic capacitor replacement near the heating unit. (Check the operation of each input/output)
Accessories: power cord, copy of instruction manual
Main specifications: PHONO (MM/MC) line input 5 systems W466 x H153 x D385 mm 9.7 kg
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
HS-LINK cable This is a dedicated cable for HS-LINK digital signal transmission that evolves from the 1.5m Accuphase HDL cable. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 598,000 yen Manufacturer maintained! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that lets you hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
Accessories: none
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
The balance cable uses an 8-core multi-hybrid conductor with 2 pairs of 4 types of copper wires arranged in each of the 4 types of 1.0 m pair, 7N ultra-thick high-purity copper wire AgA silver-plated annealed copper wire, PCOCC single crystal oxygen-free copper wire, and OFC oxygen-free copper wire. This cable has an excellent balance between sound thickness and stretchability (Tomoho Asaine)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
Maintained in 2017/7. Accuphase FM dedicated tuner. As a synthesizer tuner, it has satisfactory sound quality far surpassing tuners in the same price range. Not only does it have clear sound quality, but it also has a strong mid-range tone, and it is a high quality model that achieves both good sound quality and good reception performance. There are scratches, scratches, etc. on the exterior. Serial C9W680 (Takasaki Atsushi)
Maintenance information: 2021.7.15 maintained (glass exterior fog cleaning, FL tube fog stain cleaning, MPX separation characteristics readjusted, MUT level readjusted, meter display reset, and other adjustments are not possible)
Accessories: manual
Main specifications: FM dedicated tuner, quartz synthesizer system, 12 stations, random memory tuning, W465 x H135 x D340 mm, 6.0 kg
Built-In Phono Equalizer Unit Equipped with a high performance high gain equalizer. The internal dip switch allows switching between MM and MC, and the MC input impedance and subsonic filter can be set to ON and OFF.
Maintenance information: 2024.6.10 Operation confirmed
Accessories: none
Main specifications: Compatible models C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, etc. [MM type cartridge] gain 36 dB, input impedance 47 kΩ [MC type cartridge] gain 62 dB, input impedance 10/30/100 Ω switching E-550 E-350 E-450 C-2110
Maintained! Accuphase first generation power amplifier. Unlike today's company's tone, the wild sound with a strong punch is attractive. It goes well with jazz and rock. The exterior has line marks and dullness. Serial L6T748 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (input volume, output relay, semi-fixed VR, etc. replaced due to foot rattling, etc., replacement, etc., switch cleaning card, edge contact cleaning, solder correction, wiring restyling. Bias and offset check output voice check internal cleaning. Note: The MAIN&REMOTE1 speakers are connected in series. (There is no sound unless both speakers are connected)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 150 W/ch frequency characteristics 20 Hz to 20,000 Hz W445 × H152 × D355 mm 25 kg
Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
Accupase's best model as an integrated player compatible with SACD. It is a best-selling SACD player that inherits the know-how of advanced models. It is delicate, has a sense of scale, and has a large sound field. While it has the amount of information unique to high-end players, the fine particle feel that feels fine against the skin is truly remarkable. There is a scratch on the top plate. Serial D9Y630 (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: SACD compatible CD player, ultra giter free plus PLL circuit, MDS++ conversion system, D/A converter, HS-Link equipment, frequency characteristics 0.5 to 50 kHz, S/N ratio, 114 dB, W477 x H156 x D394 mm, 27 kg
The price has been drastically reduced! 2024/5/31 sales price 178,000 yen Maintained! Second generation model of the famous P-300 series. The sharp, sharp, and exhilarating sound is alive and well. It also goes well with JBL, etc., and makes a powerful sound. You can enjoy rough sounds that cannot be experienced with current products. There are scratches and scratches on the exterior. Serial B8Y695 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 Maintained (output relays, film capacitors, electrolytic capacitors, semi-fixed VR, etc. replaced. Fixed because the switch is stuck. ATT disassembly and cleaning. SP switch polishing cleaning. Solder correction. Card edge contact cleaning. Increase and tighten the output terminals. ※Bias and offset check adjustment. Output audio check. (*When using MAIN & REMOTE1 speakers, be sure to connect both speakers.)
Accessories: power cord
Main specifications: 150W+150W (8Ω) W445×H160×D355mm 25kg
*Ordering decorative plates and power cords is in progress. Accuphase is a popular premain. It is a model that has energy in the mid-range, and also has strength and stickiness. It's sharp, very easy to listen to, and it's nice that it doesn't lose its atmosphere even when the volume is low. Record playback is also possible by adding a phono equalizer option board. There are no visible scratches on the exterior, etc., and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: 170W+170W pre/power separable W475 x H180 x D422 mm 23 kg
A high-performance integrated SACD/CD player that is the successor to the DP-550. It is a stable sound that makes you feel the thickness of the mid to low frequencies, and the spread of sound from low to high frequencies is not excessive or insufficient. The USB terminal is compatible with 384 kHz 32 bit and 11.2896 MHz 1 bit DSD. The tray button printing is missing. There is a small scratch on the side (Sasaki Shota)
Maintenance information: 2024.6.9 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: 4MDSD+ sampling frequency HS-LINK 32kHz-384kHz (PCM), 2.8224MHz, 5.6448MHz (DSD), coaxial32kHz-192kHz, optical32kHz-96kHz (PCM), USB32kHz-384kHz (PCM), 2.8224MHz, 5.6448MHz (DSD), 11.2896 MHz (DSD/ASIO only) output Level control 0 dB to -80 dB frequency characteristics 0.5-50,000 Hz dynamic range 116 dB dimensions W465 x H151 x D393 mm weight 18.8 kg
Maintained by the manufacturer! Accuphase mid-size model equipped with phono (MM/MC). Stable sound quality with high S/N, high resolution and high transparency. Also, just like this age, the bass has elasticity and energy, so you can enjoy it regardless of the music genre. On the exterior, there is a feeling of use such as small scratches and dirt on the front, and dullness of the terminals. Serial E5Y882 (Kanai Hidetsugu)
Maintenance information: 2024.6.13 manufacturer maintenance (main volume, balance volume cleaning, meter, input switch replacement, inspection, adjustment, safety check, pressure resistance check)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: output 100W+100W (8Ω) power consumption 290W 8Ω load rated output 390W phono input 1 system (MM/MC switching) line input 7 systems (balanced x 2 systems, unbalanced x 5 systems) tape system 1 system dimensions W475 x H170 x D418 mm weight 20.2 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/9 sales price 15,000 yen balance cable 3.0 m pair oxygen-free copper OFC Ritz wire type 2 core shield structure. It is a quiet and beautiful sound without falsehood that excludes camouflage. The exterior has a feeling of use such as dullness and scratches on the plug (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
It hasn't been in stock in a long time! Accuphase Premium Cartridges Using a sapphire tube cantilever, the sound is straightforward with no specific sound, almost no distortion, and a perfect sense of range. Now it's a manufacturer that pushes ahead with the cutting edge of digital audio, but it's a cartridge where you can once again feel the high level of analog audio technology (Yamato Yuki)
Maintenance information: 2024.5.31 operation confirmed
Accessories: The original box needle cover is missing
Main specifications: MC type output voltage 0.18 mV needle pressure 1.5 to 2.5 g optimal 2 g impedance 4 ohms line contact needle
Maintained by the manufacturer! This mono power amplifier was developed as the first full-scale high-output power amplifier for consumer use. The sound quality is unique to Accuphase, which has high power and is full of subtlety. Equipped with a digital meter that instantaneously calculates real power. By switching between modes, it is easy to drive even ultra-low impedance speakers. There is a feeling of wear on the exterior such as scratches. E1X029 E1X030 (Jun Tamai)
Maintenance information: 2024.6.6 Accuphase maintained (relay contacts replaced due to deterioration, all switches, volume, reworked due to contact cleaning, parts replaced due to stress deterioration, safety confirmation, pressure resistance test, operation characteristics check, each readjusted cleaning pair, similar treatment for matching characteristics)
Accessories: original box
Main specifications: 800W+800W (8Ω) W481 x H239 x D489 mm 47.2 kg
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
The price has been drastically reduced. 2024/6/6 sales price 148,000 yen Manufacturer maintained! Accuphase CD player. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. There are many line marks, other small scratches, and a feeling of use on the top surface. Serial D0Y305 (Murakoshi Yoichi)
Maintenance information: 2024.6.4 manufacturer maintenance (tray opening/closing belt set and buffer spacer, operation switch, phase and capacitor replacement. Disassembly and cleaning of the loading mechanism. Operation, characteristic tests, aging tests, readjustment of parts, interior and exterior cleaning, insulation, and safety tests)
Accessories: remote control, instruction manual (copy)
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
The XLR cable uses 1.0 m pair of high-purity silver wires and a multi-shield structure of Gore-Tex, copper foil, and Teflon. The high level of transparency that is clear and has no peculiarities is attractive. Fits a wide range of devices. (YONEJIMA Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: none
Short plug for balanced input terminals. It can be inserted into an empty input terminal such as an amplifier or D/A converter to achieve a noise reduction effect. An item that also reinforces the back plate of the equipment, enhances damping against external vibrations, and greatly improves sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please go back and forth on the label side 1 to 2 times (Sasaki Shota)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: manual, power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
*Set of 2 Acoliba RCA short pins. A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. It is not covered by the warranty even if the sound stops coming out or if it breaks down by any chance (Kobayashi Hitoshi)
Accessories: none
Compared to the MK1 LP/cable demagnetizer, this brush-up model has a dramatically increased demagnetization effect! I dared to leave the protective sheet attached to the surface of the acrylic cover. The exterior is also good without major scratches (Oikawa Tetsuji)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W430 x H105 x D400 mm 9.02 kg
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please go back and forth on the label side 1 to 2 times (Daiki Goto)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
Short plug for balanced input terminals. It can be inserted into an empty input terminal such as an amplifier or D/A converter to achieve a noise reduction effect. An item that also reinforces the back plate of the equipment, enhances damping against external vibrations, and greatly improves sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
※The top surface is severely damaged, so it is inexpensive. This is a custom-made model that fits the size of Acoustic Revive's popular RSS series 4-legged speaker stand to LAT-2. Of course you can use it with other speakers if the size fits (Ryo Mizusaki)
Accessories: spike holder
Main specifications: W300 x H610 x D400 mm top plate W280 x D360 mm 28.5 kg/1 bottle (actual measurement)
Premium model with a 1.5 m pair balance cable, limited to 250 pairs worldwide. 19 stress-free 8nCu/0.26φwires are used as conductors. Thorough noise countermeasures have achieved high quality sound with extremely high SNs. On the exterior, there is dullness on the terminals. (YONEJIMA Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
Stress-free processing that maintains the atomic arrangement in a healthy state at all times due to the unique self-annealing of the 1.0 m pair of RCA cables. It is a cable that enables strict and extremely accurate digital transmission. On the exterior, there is a small scratch on the terminal (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
PSE standard product ACROLINK POWER CONNECTOR Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
RCA → XLR cable (No. 2 HOT) 1.0m pair, new-generation minimum value guarantee, stress-free 7N copper conductor & polyolefin sheath, model with fine texture, sharp, and very careful sound. Recommended for those who want to listen closely to classical music. There is dullness on the terminals. (YONEJIMA Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
RCA cable, 1.0 m pair, 6N copper, 2-core conductor, aluminum shield. It is a cable suitable for vocals with just the right balance between sound loss and mid-range thickness (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 6N copper conductor, and a luxurious specification using 6N material for the shield. It is a cable with resolution and natural sound quality perfect for high-resolution playback (Yoichi Murakoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Balance cable 1.0m pair stress-free 6N conductors Sound quality that is thicker than AcroLink and has a natural texture that shines with good balance. It is a character that is compatible with a wide range of devices. In addition to cracks in the exterior and plug, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
The 2.0m RCA terminal stress-free 6ncU digital cable is bright and has an attractive character. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Currently sold. ADC 10-band graphic equalizer. There are no problems with the current situation, operation, etc., but the current situation is because it is cheap. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: none
Main specifications: W435 x H88 x D222 mm 4.3 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg