The price has been reduced. 2024/3/17 sales price 2,500 yen. An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a finger-pointing split type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
The disposal price has been reduced. Member discounts are not applicable. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
Mono jack to XLR (male) conversion cable 3.0 m details unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2022/11/25 sales price 100,000 yen The TA-4151A enclosure has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it extremely sturdy. The baffle opening is φ296 mm, the unit fastener is made of wood, and the stop screw for the baffle plate is missing. On the exterior, the veneer is peeling off, and there are stains, scratches, and stains. (TAKIMOTO Yutaka)
Accessories: None ※The stop screw on the baffle plate is missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
XLR female to mono jack cable, 3.0 m, unspecified microphone cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
Headshell with unknown manufacturer and model number. Simple design (Daiki Goto)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Main specifications: 10.5g dead weight (actual measurement)
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing is CV4004, the printing is a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 42 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Unspecified granite board. It is a high-weight board with a beveled and mirror finish, which contributes to damping vibrations and tightening sound. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: none
Main specifications: W400 x H30 x 350 mm 11.8 kg (all actual measurements)
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing was a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 38 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
5DIN-RCA cable 0.7 m connection cable for QUAD with unknown details. Since number 3 is L+, number 5 is R+, and number 2 is connected to LR -, it can be used for QUAD input (Takasaki Atsushi)
Maintenance information: 2024.8.30 Continuity confirmed
Accessories: none
※There is a TELEFUNKEN ECC803S, but the printing was determined to be CV4004 from the structure, and the printing was determined to be a reprint. The plate is not a box type, only one side of the rib plate is caulked. Sold in 1 bottle, ECC83/M8137 equivalent tube, measured value 44 (rejected value 32) with a replacement box ※The measured value indicates the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
XLR female to mono mini jack cable 4.5m unusual combination microphone cable. Can also be used as a normal microphone cable using standard jack conversion (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Speaker cable 3.0 m pair terminal has not been processed, so the details are unknown. The exterior is dull, and a feeling of use can be seen (Asaine Tomoho)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
The details of the 1.2m Sennheiser recable are unknown, but it is a soft cable and easy to handle (Tamura Eiji)
Maintenance information: 2024.8.30 Operation confirmed (sound output confirmed on HD650)
Accessories: none
The price has been drastically reduced. 2020/6/19 sales price 60,000 yen A 38cm Onken (Onken) style enclosure with impressive bass reflex cameras lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. The ALTEC 515B was originally mounted, and it is an enclosure that I would like to assemble with a horn system to make it sound solid. There is quite a feeling of use such as dirt, etc., and there are some broken screws. (TAKASAKI Atsushi)
Main specifications: W800 x H1023 (including casters) x D500 mm, mounting hole diameter: 345 mm, screw pitch (diagonal), 372 mm, width between splints behind the entire baffle 410 mm (actual measurement) 79.6 kg (actual measurement)
The disposal price has been reduced! Member prices are not applicable. 2018/10/17 sales price 100,000 yen This is an impressive vintage rack with a western plate. It is about 2 meters tall and can mount 19-inch devices. There are scratches and stains on the exterior. Also, there are some cracks and inclinations in the mount part. (Miura Kimiya)
Accessories: No accessories
Main specifications: 19 inch rack hole pitch 465 mm W535 x H2090 x D660 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/8/26 sales price 8,000 yen. Unspecified granite board. It also seems good for large amplifiers, analog players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W600 x H45 x D500 mm 36.5 kg (actual measurement)
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill, which symbolizes old JBL, is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※Only 1 speaker cable, 3.0 m, banana-banana terminal specifications are unknown; appearance, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.9.7 continuity confirmed
Accessories: none
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
The disposal price has been reduced. Member discounts are not applicable. 2022/8/31 sales price 3,500 yen ※1 bottle only. Speaker stand with unknown manufacturer name, model, etc. There are exterior, abrasions, and dullness (Kobayashi Hitoshi)
Accessories: none
Main specifications: W280 x H270 x D330 mm 4.8 kg (actual measurement)
Unspecified 2-tier rack. Load capacity etc. are also unknown. The bottom plate is just attached with dowels and is not fixed. Please note that if you lift only the top, the bottom plate will come off. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W650 × H344 × D560 mm 32.2 kg
Headshell with unknown manufacturer and model number. Simple design (Daiki Goto)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Main specifications: dead weight 10.7 g (actual measurement)