The price has been reduced. 2024/3/17 sales price 2,500 yen. An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a finger-pointing split type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
Upholstered sound control panel with unknown details. The size is easy to use. There is a feeling of use such as stains (Daiki Goto)
Accessories: none
Main specifications: W650 x H120 x D650 mm, weight 400 g (actual measurement)
The details of the 1.2m Sennheiser recable are unknown, but it is a soft cable and easy to handle (Tamura Eiji)
Maintenance information: 2024.8.30 Operation confirmed (sound output confirmed on HD650)
Accessories: none
Unspecified granite board. It is a high-weight board with a beveled and mirror finish, which contributes to damping vibrations and tightening sound. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: none
Main specifications: W400 x H30 x 350 mm 11.8 kg (all actual measurements)
The disposal price has been reduced. Member discounts are not applicable. 2024/8/26 sales price 8,000 yen. Unspecified granite board. It also seems good for large amplifiers, analog players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W600 x H45 x D500 mm 36.5 kg (actual measurement)
Unspecified granite board. It is polished on 5 sides. Use it for amplifiers, CD players, medium speakers, etc. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: none
Main specifications: W453 x H20 x D453 mm 9.4 kg (all actual measurements)
Optical cable 1.5m square-round plug details unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2022/8/31 sales price 3,500 yen ※1 bottle only. Speaker stand with unknown manufacturer name, model, etc. There are exterior, abrasions, and dullness (Kobayashi Hitoshi)
Accessories: none
Main specifications: W280 x H270 x D330 mm 4.8 kg (actual measurement)
Wooden 5-tier rack with casters from unknown manufacturer. The weight is light, and the shelves inside can also be adjusted with dowels, so it seems easy to use. The exterior has scratches, dullness, etc., and signs of use and installation marks (Ryo Mizusaki)
Accessories: none
Main specifications: W580 x H1290 x D470 mm weight 41 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
Mono jack to XLR (male) conversion cable 3.0 m details unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
Only 1 bottle unopened! Unspecified XLR (male) to XLR (female) relay plug. The exterior is good (Kobayashi Hitoshi)
Maintenance information: unopened, unchecked
Accessories: none
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The disposal price has been reduced. Member prices are not applicable. 2022/11/25 sales price 100,000 yen The TA-4151A enclosure has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it extremely sturdy. The baffle opening is φ296 mm, the unit fastener is made of wood, and the stop screw for the baffle plate is missing. On the exterior, the veneer is peeling off, and there are stains, scratches, and stains. (TAKIMOTO Yutaka)
Accessories: None ※The stop screw on the baffle plate is missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill, which symbolizes old JBL, is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
1.3 meter pair of RCA cables The model is unknown because the description is not visible. The exterior is dull, scratched on the plug, and there is a feeling of use such as writing. (ASAINE Tomonori)
Maintenance information: 2024.9.10 continuity confirmed
Accessories: none
Only 1 RCA cable for 0.2 m L only has an exterior, and both plugs are made of THORENS, and a feeling of use such as dullness, scuffs, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
The price has been drastically reduced. 2020/6/19 sales price 60,000 yen A 38cm Onken (Onken) style enclosure with impressive bass reflex cameras lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. The ALTEC 515B was originally mounted, and it is an enclosure that I would like to assemble with a horn system to make it sound solid. There is quite a feeling of use such as dirt, etc., and there are some broken screws. (TAKASAKI Atsushi)
Main specifications: W800 x H1023 (including casters) x D500 mm, mounting hole diameter: 345 mm, screw pitch (diagonal), 372 mm, width between splints behind the entire baffle 410 mm (actual measurement) 79.6 kg (actual measurement)
Pair tube, PX4 equivalent tube, direct thermal triode, made in England, measured value 54/52 (rejection value 39) with white box (there is writing on the box) *The pair was judged based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
XLR female to mono jack cable, 3.0 m, unspecified microphone cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
Sold 1 bottle EF86/6267 compatible ball, military high reliability tube mesh measurement value 46 (rejected value 33), seems to be made by GEC due to the structure. Comes with a white box ※The measured values indicate GM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
※There is a TELEFUNKEN ECC803S, but the printing was determined to be CV4004 based on the structure. The plate is not a box type, only one side of the rib plate is caulked. Sold in 1 bottle, ECC83/M8137 equivalent tube, measured value 36 (rejected value 32) with replacement box ※The measured value indicates the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing was a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 38 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
※There is a TELEFUNKEN ECC803S, but the printing was determined to be CV4004 from the structure, and the printing was determined to be a reprint. The plate is not a box type, only one side of the rib plate is caulked. Sold in 1 bottle, ECC83/M8137 equivalent tube, measured value 44 (rejected value 32) with a replacement box ※The measured value indicates the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing is CV4004, the printing is a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 42 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The disposal price has been reduced. Member discounts are not applicable. 2024/7/11 sales price 10,000 yen. This is a phase plug for the B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. The degree is generally good (Takasaki Atsushi)
Accessories: none
Main specifications: 227g/piece