※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
5DIN-RCA cable 0.7 m connection cable for QUAD with unknown details. Since number 3 is L+, number 5 is R+, and number 2 is connected to LR -, it can be used for QUAD input (Takasaki Atsushi)
Maintenance information: 2024.8.30 Continuity confirmed
Accessories: none
XLR female to mono mini jack cable 4.5m unusual combination microphone cable. Can also be used as a normal microphone cable using standard jack conversion (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/2/12 sales price 4,000 yen. Unspecified rosin flux core lead solder 4.0m 40% tin, 60% lead. Recommended for internal wiring of amplifiers (Kobayashi Hitoshi)
Accessories: none
Unspecified 3-way enclosure It is a super bargain price with a considerable feeling of use. For experimentation or research, if you are a self-author with confidence in your arm, how about challenging it? (Yoichi Murakoshi)
Main Specifications: W648 x H967 × D457mm 36.8 Kg (Measurement) Woofer opening diameter 300 mm Scoker opening diameter 173mm tweeter opening diameter 102mm
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
The price has been drastically reduced. 2024/5/22 sales price 30,000 yen A backload type enclosure that can mount a JBL38cm woofer with unknown details. The construction is solid. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W603 x H1100 x D508 mm 40 kg (actual measurement)
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
Disposal price reduction. 2024/3/22 sales price 20,000 yen Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2023/9/22 sales price 69,800 yen ※Since it is a modified product, it will be sold as is. 3-way network. Detailed crossovers are unknown. The attenuator is equipped with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight gap, but the sound has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
※Only 1 speaker cable, 3.0 m, banana-banana terminal specifications are unknown; appearance, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.9.7 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/20 sales price 5,000 yen. Unspecified weight for 3012R. I was able to attach it to the 3012R shaft, but detailed uses are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 86g
Speaker cable 3.0 m pair terminal has not been processed, so the details are unknown. The exterior is dull, and a feeling of use can be seen (Asaine Tomoho)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
Unspecified 2-tier rack. Load capacity etc. are also unknown. The bottom plate is just attached with dowels and is not fixed. Please note that if you lift only the top, the bottom plate will come off. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W650 × H344 × D560 mm 32.2 kg
Front road horn from unknown manufacturer. The bass reflex on both sides is reminiscent of an Onken enclosure, but details are unknown. There are many bruises on the corner surface. A self-made stand is included, but the casters are damaged (Murakoshi Yoichi)
Accessories: saran net, casters
Main specifications: W600 x H839 x D720mm weight 59.2 kg unit opening W345 (maximum) x H202mm screw pitch 380 mm (length/width) 370 mm (oblique)
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
The price has been reduced. 2024.7.14 sales price 10,000 yen screwdriver, how to use it is unknown. This item was previously purchased together with the WE555, but I don't know if it is compatible with the 555. Please judge from the measurements. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
*One jumper plate is missing. 1 pair of unspecified speaker terminals If you've been looking for one, please take this opportunity. Exterior, other than those described above, is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W137 x H81 x D105 mm 112 g (actual measurement)
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
The price has been reduced. 2024/1/20 sales price 3,000 yen. 1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
The disposal price has been reduced! Member prices are not applicable. 2018/10/17 sales price 100,000 yen This is an impressive vintage rack with a western plate. It is about 2 meters tall and can mount 19-inch devices. There are scratches and stains on the exterior. Also, there are some cracks and inclinations in the mount part. (Miura Kimiya)
Accessories: No accessories
Main specifications: 19 inch rack hole pitch 465 mm W535 x H2090 x D660 mm
Headshell with unknown manufacturer and model number. Simple design (Daiki Goto)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Main specifications: 10.5g dead weight (actual measurement)
Unspecified headshell. Its own weight is 10.4 g, which seems to be easy to use (Oikawa Tetsuji)
Main specifications: dead weight 10.4 g (actual measurement)
Unspecified headshell. The construction is solid. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Main specifications: dead weight 10.6g
Unspecified headshell. Its own weight is 10.4 g, which seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 10.4 g (actual measurement)
Unspecified head shell. It is similar to the Technics SH-98D, but the size is slightly different and details are unknown. The exterior is generally good (Kobayashi Hitoshi)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: dead weight 10g (actual measurement)