*Set of 8. Technica hybrid insulators. Special anti-vibration rubber “Honeynight” is used on the top and bottom, and machined brass is used as the base material to effectively suppress unnecessary vibrations. It is a safe design that does not slip even on light devices (Satoshi Yonejima)
Accessories: No accessories
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
A large self-made audio board with a sturdy wooden board sandwiched between a floor mat and felt. It was created by the previous owner for TANNOY Westminster. As for the exterior, there is a feeling of use such as scratches on the bottom (Tamai Jun)
Accessories: none
Main specifications: size W1040 x D700 x H23 mm weight 8.0 kg
The price has been drastically reduced. 2024/9/16 sales price 49,800 yen. Phono equalizer equipped with CEC's unique LEF circuit. Precise adjustments are possible with the dip switch on the bottom, and it is compatible with all cartridges. It is MC only, but it supports balanced connections. The thick sound that exceeds the price range is attractive. Externally, there are rust and light scuffs around the screws and inlet mounting. Serial P53061 4003703 (Murakoshi Yoichi)
Maintenance information: 2024.9.14 sound output confirmed
Accessories: instruction manual, power cord
Main specifications: balanced input (MC only), RCA input (MM/MC) W217.5 x H57 x D257 mm 2 kg
Unspecified 2-tier rack. Load capacity etc. are also unknown. The bottom plate is just attached with dowels and is not fixed. Please note that if you lift only the top, the bottom plate will come off. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W650 × H344 × D560 mm 32.2 kg
The disposal price has been reduced! (Not eligible for member discounts) 2024/9/5 sales price 75,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The supports are filled with filler (sand). The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The disposal price has been reduced (member prices are not applicable). 2024/8/6 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. There is dullness and small scratches (Sasaki Shota)
Maintenance information: 2024.8.6 maintained (all internal parts checked, LCH power stage TR x 1 half short NG replacement, DC cut C replacement within the board, bottom cover rubber foot defect replacement, operation check)
Accessories: copy of manual, power cable
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The disposal price has been reduced (member prices are not applicable). 2024/7/25 sales price 298,000 yen Maintained. A rare item! Tannoy's separate 2-way speaker. Details are unknown, but the cabinet appears to be a Tannoy original box (there is a serial stamp on the cross section on the back of the enclosure). It's similar to Chatsworth, but the depth of the box is quite short and is sized to fit a woofer just right. A relay type speaker terminal block is attached to the bottom (terminals have not been replaced in consideration of the original). The woofer is 12 inches and has an inverted rubber roll edge. As you can imagine from the thinness of the box, it is not suitable for orchestras with a lot of sounds, but you can enjoy a life-size vivid sound with an acoustic sound source (Sasaki Shota)
Maintenance information: 2024.7.25 Maintained (exterior repair/polishing/clear finish. (Single-sided tweeter repair) 2020.7.1 maintenance completed (input/output waveform and balance check, frequency characteristic measurement check (~ 42 kHz) performed, and the capacitor was used as it was originally. Exterior repair/polishing/clear finish, saran net cleaning, fraying repair, retensioning, woofer maintenance (center adjustment on one side), tweeter maintenance (magnetic circuit gap cleaning/center adjustment, resonance area noise prevention))
Accessories: none
Main Specifications: 2 Way 2 Speaker Woofer LSU/LF/12F Tweeter LSU/HF/1 Network A27836 15Ω W430 × H828 × D177 mm 13.3 kg (actual measurement)
The diamond mark on the bottom of the 12AU7 compatible ball sold per bottle was not confirmed, but it was determined that it was the original ECC82 from the internal structure. Measured value 102 (rejected value 56) with white box ※The measured value shows the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The disposal price has been reduced. Member prices are not applicable. 2024/5/13 sales price 75,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the goal of suppressing speaker stress by absorbing and releasing it without applying a load due to the diamond formation structure (Daiki Goto)
Accessories: spikes, T-PROP
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
Sony Theatre System Tallboy Speaker The sweep test is good, but since the corn paper has dents, it is currently sold at a low price. This speaker is easy to use with both front and rear speakers. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.3.18 Operation confirmed
Accessories: nothing
Main specifications: W60 x H1050 x D60 mm bottom 250 mm weight 3.4 kg (actual measurement)
OTTO ST-7D stylus For MG8, MGT-2, and MGT42K It seems unused, but it's junk because the needle hasn't come out of the body due to deterioration of the damper. Please use it as a parts remover. There is dullness on the exterior ※ member prices are not applicable and there is no guarantee for junk items, and they are sold as is (Kobayashi Hitoshi)
Maintenance information: Operation unconfirmed (the cantilever has sunk due to damper deterioration. (As for junk items, they will be handed over as is.)
Accessories: original box
OTTO ST-4D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SWING velvet record cleaner. On the exterior, there is a feeling that the case lid is missing, faded, dull, etc. (Kobayashi Hitoshi)
Accessories: case bottom
Main specifications: W88 x H60 x D33 mm, weight 18 g (main unit only)
The disposal price has been reduced! (Member prices are not applicable) 2023/11/7 sales price 79,800 yen ※It is cheap because the condition is not very good. Comes with an ottoman. Among the company's many Stressless chairs, it is the most compact model and has a simple design that fits any room. It supports your lower back with a firm sitting comfort. On the exterior, the leather is worn and has wrinkles and peeling. (Miura Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm seat height 380 mm ottoman: W550 x H400 x D420 mm
Mount adapter compatible with 35mm diameter speaker stands. This adapter is used when mounting speakers that do not have a hole in the bottom (Tetsuji Oikawa)
Main specifications: load capacity approx. 30 kg, stand mount diameter: 35 mm, base thickness: approx. 8 mm
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
※Shipping service. Special Issue No. 36 = All Speaker Systems (above) Test of the latest 40 models/Sound Quarterly (listen to new products) /1975.10.1 issue. Published models: CHRYSLER/LAB-1000,2000 YAMAHA/NS-451 ALLISON/ONE, TWO SLESTION/UL6, UL8 OMAL/MODEL TL6 CABASSE/BRIGANTIN INFINITI/2000Ⅱ JENSEN/23 YAMAHA/C-1 SANSUI/AU9900,11000, TU9900 LAX/L-80V TECHNICS/ HY-7600,7200, ST-7600,7200 VICTOR/JA-S91, S71, S51, JT-V71, V51 TRIO/KA-7500, KT-7500 DIATONE/DA-U850, DA-F750, DA-U750 GAS/AMPZILA SAE/MARK2500 ALTEC/9440A RADFORD/HD250, ZD22 DENON/DP-1700, DL-109R ,109D DIATONE/DP-91D YAMAHA/YP-600, YP-1000Ⅱ MICRO/TAKE-5 CEC/BD-7000 OTTO/TP-1200 SANSUI/SR-525 GRACE/G714, G704 DUAL/601,1228,1225. The photograph is a sample, so the actual item may be broken or written on it.
The price has been reduced. 2022/12/3 sales price 49,800 yen ※ It is cheap because the leather part is in a fairly poor condition with cracks, wrinkles, peeling seams, etc. Many audiophiles love this recliner. You can easily set the reclining position with adjustments under the left and right handrails. I definitely recommend it for relaxing listening to music at home. The leather color is black, and the base color is brown, giving it a relaxed atmosphere. Comes with an ottoman. The seat surface is also depressed due to deterioration (Murakoshi Yoichi)
Accessories: ottoman
Replacement needles for SANYO (OTTO) components stereo A-352, DC-620X, DC-710, etc. It is unchecked for replacement needle only. (Mizushima Itsuro)
Accessories: case
The price has dropped drastically. 2018/8/31 sales price 79,800 yen The capacitor has been replaced with a JENTZEN film capacitor! The network used in the L200B. Perfect for 2-way use assuming a JBL 15 inch woofer. It is a rare network with a thick and powerful sound. There are stains and small scratches on the exterior (Wang Zhan)
Maintenance information: Maintained on 2015.7.7 (terminals replaced with banana plug compatible products. The connection part of the input wiring was changed to a gobble. ATT exchange. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check)
2011.7.21 Maintained (capacitor - replacement, silicon bond application, ATT contact check, rivet repair, characteristic check, sound and waveform check, interior cleaning, etc.)
Accessories: none
Main specifications: 8Ω 800Hz 150W mounting opening W91xH98mm screw pitch left and right 111 mm top and bottom 143 mm