Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
Output transformer sale push pull output 40W primary: 8 kΩ secondary: 4-8-16 Ω W83 x H104 x D 78 mm 2.3 kg/piece There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
※Only 1 network coil attenuator Orient Hi-B cut core attenuation -1 to -20 dB (1 dB interval) maximum input 300 W usage frequency 200 Hz or more, line diameter 1.2 mm, W85 x H72 x D75 mm, approx. 1.1 kg/piece There is distortion in the washer part (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 5V/3A, 2.5-6.3V/5.2 A x 2, 6.3V/3A, 360-400-450V/170mA W120 x H95 x D105 mm 5.3 kg (not including protrusions) There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Input transformer pair sale primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W50 × H70 × D57 mm 0.75 kg/piece (actual measurement, not including protrusions) The badge is discolored, and there are scratches in places (Kojima Yosuke)
Accessories: specifications
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ secondary: 4-6-8 Ω W50 x H81 x D58 x 57 mm 0.86 kg (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Screwdriver Transpair sale 1st order: 5 kΩ 2nd order: 5 kΩ CT/1.25 ksplit DC30mA 50 to 15 kHz output level 30dBm W76 × H83 × D44mm 0.7 kg (actual measurement, including protrusions) One side with original box seems to be an unused item due to the state of the terminal! (KOJIMA Yosuke)
Accessories: original box
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Line matching transformer pair sale primary side: 600 Ω CT (150 split) secondary side: 20 kΩ CT (5 k split) W77 x H71 x D43 mm approx. 0.55 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
Output transparent pair sale primary: 5 kΩ secondary: 600 Ω CT (150 Split), 6 ohm DC 60 mA output 3 W W85 x H83 x D70 mm 1.7 kg/piece (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
* There is no name plate, but I was able to confirm a slight embossing of the model number on the belt seal on the side. Output: 50W for transparent sale push pull output: 50W primary: 5kΩ secondary: 4/8/16/32Ω use: 6L6, 6CA7, 6GB8, etc. W100 x H115 x D90 mm approx. 3.5 kg/piece, no name plate, and is inexpensive because it has been repainted and written on the entire surface (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
Equipped with a WD RED 3TB x 2 HDD. It is currently SHR mirrored. Equipped with an 8th generation Intel Celeron J4025 2-core CPU (2.0 GHz, maximum 2.9 GHz). Until recently, it was used as sound source storage for Roon. There is a line wound on the front desk (Yasuhito Koshihama)
Maintenance information: 2024.6.13 storefront operation confirmed
Accessories: power adapter
Main specifications: Intel Celeron J4025 64 bit 2 core CPU system memory 2GB DDR4 non-ECC (maximum 6GB 2GB+4GB) LAN x 2 ports (1Gb) 3.5 inch SATA HDD x 2 bays W108 x H165 x D232 mm 1.3 kg
SP cable BW (Y lug → banana) 2.0m pair early 90s Synergistic Research
cable You can fully feel the sound unique to SOLID and thick Synergy with this entry cable. The exterior is dull due to aging (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
RCA cable 1.5m pair with AC adapter Synergistic Research's top-grade reference series entry model. 2-core twist construction The clear, three-dimensional, and realistic sound images unique to Synergistic are appealing. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: AC adapter
Pair tube, metal, brown base, made in America, measured value 66/64 (rejected value 44) with original box (some written), sticker is attached to the base part, and there is a getter burn ※ The pair was determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box