The price has been reduced. 2024/6/17 sales price 128,000 yen It is a transformer that has improved the instantaneous power and power of the reproduced sound by adding improvements to the HI-PC core material with excellent magnetization characteristics, drastically improving internal loss and special impregnation treatment. The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: instruction manual, original box
Main specifications: impedance 1-10Ω load impedance 47kΩ boost ratio 20dB (3Ω/47kΩ/1 kHz) W160 × H73 × D128 mm
※The current situation is that there is a slight sound leak even when ATT is squeezed out. Audio pro subwoofer If you're thinking about using a subwoofer for the first time, I recommend it! On the exterior, the SP terminal has faded due to sunburn, there is a floating veneer sticker in the lower right corner, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed (sound output OK. (The current situation is that there is a slight sound leak even when ATT is squeezed out)
Accessories: saran net, instruction manual
Main specifications: ACE-bass amplifier built-in bass reflex amplifier output 100W RMS 20cm woofer playback frequency band 27 to 100 Hz W329 x H360 x D365 mm 12.7 kg
It is placed in the corner of the room and plays a role in adjusting the sound field, such as absorbing and diffusing excess bass. The sense of scale has been improved, and it also creates a three-dimensional effect. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: H1520 x radius 250 mm weight 12.50 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
Unspecified speaker stand. It's heavy and well-built. If you're looking for this size, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate W240 x D242 mm W280 x H630 x D340 mm 15 kg (actual measurement)
*Currently sold. Audio-Technica's MM/MC compatible phono equalizer. Although it is affordable, it is well-built and MM/MC compatible. Recommended for modern systems without phono input. In addition to the exterior and cigarette smell, dullness and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: AC power
Main specifications: input impedance mm47kΩ/mc100Ω W44 x H105 x D135 mm approx. 460 g
※ There is no problem with operation, but it is sold as is because it is cheap. Headphone amplifier using vacuum tubes. You can enjoy a clean sound (Oikawa Tetsuji)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: power cable
Main specifications: Vacuum tube used 6N16B W210 x H70 x D330 mm 3.1 kg (actual measurement)
A 3-way speaker system with 075 mounted on our 4320, which was fully restored in 2021. The 4502 original enclosure is serial numbered! The sense of energy that comes close in front of you, and the dynamic, and dynamic sound quality is truly JBL. You can enjoy lots of dynamic sounds. Since 075 is included, the sharpness in the high range is much higher than the 2-way 4320. There is rust on the tweeter, and there are small scratches and dullness on the speaker cabinet (Sasaki Shota)
Maintenance information: 2021.4.20 Maintained (exterior repair/all paint (new other hakama creation/new mechra board created) saran net replacement/frame repair, woofer maintenance (edge replacement/cone paper coating)
Driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, screw replacement, terminal contact cleaning) network maintenance (full panel washing. Terminal rust removal, pickling treatment, cleaning, insulation bush & mounting screw replacement. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: Mechra plate
Main specifications: 3-way unit configuration woofer 2215B driver 2420 horn 2307 tweeter 075 network 3110 3105 frequency characteristics 40 Hz to 15,000 Hz crossover frequency 800 Hz/7,000 Hz W610 x H760 x D510 mm
Tall tower audio rack Made of powder-coated scratch-resistant metal and tempered safety glass made in Italy. It has rounded glass front shelves for a custom made look. It includes a management system to hide power cords and interconnect cables. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: shelf glass plate thickness 6 mm load capacity 23 kg size 635 x 610 x 1,550 mm weight 46 kg
Beautiful item with original box! The optical digital cable is 3.0 m transparent and has high performance against external noise and electromagnetic noise from unnecessary radiation. This cable is ideal for digital transmission. The exterior is generally good (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: original box
XLR cable, 0.5 m pair, 3-core structure, Neutrik balance plug, 3-core specification. The sound is thick and solid throughout the entire range. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The RCA cable uses a 2.0m pair of 8N conductors, double shielded, and denser insulating materials and compression twists, and the sense of attack creates a realistic weight of sound. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
RCA-XLR conversion cable 0.5m pair No. 2 is a standard BELDEN line cable that has a firm thickness in the mid to low range while clearly outlining the outline of the sound (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The 8412 modern version of the RCA cable 2.0m Peer Notric plug is all-Teflon insulated. It is a cable that is more instantaneous than the price, and is suitable for JAZZ and ROCK systems. The exterior is slightly dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The 1.3 m BNC cable uses 5N (99.9995%) pure silver as the center conductor. It is a model that was carefully created by Oyaide as a silver wire cable and won the 2006 Audio Famous Equipment Award. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
USB cable 3.0 m A-B type The sound image floats up softly, and freshness and warmth coexist, and it is a cable that clearly emits the sound typical of Scandinavia. The exterior has a feeling of use such as dullness (Hiroki Aso)
Accessories: original box
RCA-XLR conversion cable 2.0m pair, 2nd hot RCA plug made by CANARE, XLR plug used originally as a microphone cable, so sound loss is good. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
Digital cable 2.0m BNC terminal double shielded with aluminum wrap and mesh Teflon developed by DuPont in the United States is used as the insulator, and it is a flat balanced cable with excellent sound separation. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
XLR cable with 1.0m peer-notric terminal, 3-core specification for the popular line cable “8412.” There is a sense of power throughout the entire range, and the warm sound quality with thick mid to low ranges is attractive. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
RCA cable 0.5m pair notric terminal This is a standard BELDEN line cable that has a firm thickness in the mid to low range while clearly outlining the sound (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The 1.5m pair of XLR cables are XLR cables using Belden's 8423, NEUTRIK plugs. 3-core construction The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
Line Phone-XLR Cable 1.5m All Teflon Insulated 8412 Modern Version It is a cable that is more instantaneous than its price, and is suitable for JAZZ and ROCK systems. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
RCA-XLR conversion cable 2.0m pair is a cable with a firm conductor similar in shape to a Siltech cable using a plug manufactured by Hotswitch Craft Co., Ltd. 2. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
This is a firm conductor cable with a shape similar to a Siltec cable using a 3.0 m pair XLR cable with a plug manufactured by SwitchCraft. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
This is a firm conductor cable with a shape similar to a Siltec cable using a 1.0 m pair XLR cable with a plug manufactured by SwitchCraft. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
※The amount of cleaning solution left is very small. stylus cleaner Using an ultrasonic cleaning method, the surface of the stylus is cleaned using a special cleaning liquid “FLUX FLUID” and the vibration of the brush pad. (ASAINE Tomonori)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: instruction manual, rubber foot cleaning solution, original box ※ torn
Main specifications: Power supply/use of 2 x AAA batteries, continuous use time approx. 5 hours, weight: 48 g
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Daiki Goto)
The pair tube seems to be made of RFT due to its 6CA7 compatible sphere structure. Measured value 44/44 (rejected value 30) lettering with replacement box is missing ※The pair is determined based on the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The pair tube seems to be made of RFT due to its 6CA7 compatible sphere structure. Measured value 42/40 (rejected value 30) lettering with replacement box is missing ※The pair is determined based on the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Although it has been cleaned, the cigarette smell remains, so it is cheap. Maintained! Marantz's mid-level premain. It is characterized by a sense of transparency and delicate tone typical of Marantz. It is supported by a thin yet sturdy power supply unit, and you can enjoy sound with a sense of stability. The main switch was damaged, and other dirt cannot be removed (Daiki Goto)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: 90W+90W (8Ω) 140W+140W (4Ω) frequency characteristics 5Hz to 100kHz W440 × H123 × D444 mm 18 kg
It has a strong tobacco smell and is inexpensive because it has many scratches and veneer peeling. The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. ※The trolley is not included (Sasaki Shota)
Accessories: nothing
Main specifications: front load horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
Speaker cable is a 2.2 m pair cable with untreated ends from the German manufacturer Einstein. Multi-core 4N copper wire construction. It is a well-balanced sound quality that achieves both thickness and resolution. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
It smells like tobacco, so it's cheap. LP record static removal brush Upgraded model of the best-selling SK-2. It is rhodium plated to remove static electricity more quickly and reliably. Can also be used on CDs and DVDs
Accessories: nothing
Main specifications: brush specifications/tip = natural hair (black goat's beard) root = synthetic hair (acrylic fiber), thickness 46 denier, conductive fiber (copper sulfide chemically bonded to acrylic fiber) W60 x H170 x D30 mm 36 g
The price has been reduced! Yamaha's top CD/SACD player at the 2024/6/17 sales price of 298,000 yen. The D/A section is equipped with ESS Technology's new-generation 32-bit converter, SABRE (Sabre) 32 Reference DAC (ES9018). High quality design with fully balanced transmission at all stages, thorough low impedance, and high rigidity and low resonance construction. It is a model aimed at natural reproduction that reaches straight to the heart of the listener like an instrument. The lettering on the open/close button has become thinner. Serial Y022203WX (Fujisawa Yukishi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: power cord (non-genuine), remote control, spike base
Main specifications: CD/SACD player playable disc CD/SACD/CD-R/CD-RW frequency characteristics 2 Hz to 20 kHz (CD) 2 Hz to 50 kHz (SACD) W435 x H142 x D440 mm 19.2 kg
The price has been reduced. 2024/6/16 sales price 448,000 yen ※Power cables are being arranged. I cleaned it, but there is a slight tobacco smell, so it's cheap. A replica model of the famous MC275 released in 2009! It has a wide range and is compatible with recent recording sources. The soft, thick, and natural tone is full of appeal unique to 275. This traditional look is heavy and full of vintage feel. It is also easy to use, such as being equipped with a power switch. On the exterior, some lettering is missing and there are letter misalignment (Sasaki Shota)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: manual, power cable, original box
Main specifications: 75W x 2 (4, 8, 16 ohms) W406 x H178 x D305 mm weight 34 kg
The price has been reduced. 2024/6/16 sales price 448,000 yen ※Power cables are being arranged. I cleaned it, but there is a slight tobacco smell, so it's cheap. A replica model of the famous MC275 released in 2009! It has a wide range and is compatible with recent recording sources. The soft, thick, and natural tone is full of appeal unique to 275. This traditional look is heavy and full of vintage feel. It is also easy to use, such as being equipped with a power switch. On the exterior, some lettering is missing and there are letter misalignment (Sasaki Shota)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: manual, power cable, original box
Main specifications: 75W x 2 (4, 8, 16 ohms) W406 x H178 x D305 mm weight 34 kg
The price has been reduced. 2024/6/17 sales price 198,000 yen It is built in a form that satisfies modern recording requirements, such as a DSD 11.2 MHz USB-DAC, a phono amplifier compatible with MC cartridges, and balanced input. It is a playful preamp with warm sound by NuTube, which was jointly developed by KORG and Ise Electronics, and an audio driver equipped with “S.O.N.I.C. Remastering Technology” produced by Mr. Ono Seigen. There are no major noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: original box, power cable
Main specifications: 2CH compatible format (USB) DSD 2.8224 MHz, 5.6448 MHz, 11.2896 MHz, 1 bit DSD3.072 MHz, 6.144 MHz, 12.288 MHz, 1 bit (only when using S.O.N.I.C. remastering technology) PCM44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz 352.8 kHz 384 kHz , 16 bit, 24 bit audio driver ASIO2.1, WDM, Core Audio (*no guarantee of operation of Windows other than Intel chips) external dimensions W432 x H93 x D282 mm 5.9 kg
Edge softening maintenance completed! Good condition. This is a diamond-tone floor-type tall boy speaker. Edge softening treatment has been applied, and the low frequency, which sounds soft and has plenty of volume, is attractive. Please enjoy the sharp taste of the Boron mid-range and the bass reflex sound full of scale. There are no noticeable scratches (Sasaki Shota)
Maintenance Information: 2024.6.16 Edge softened
Accessories: none
Main specifications: 3 way 4 speakers, bass reflex system, floor type, anti-magnetic type, 6 ohm playback frequency band 32 Hz to 40000 Hz output sound pressure level 90 dB crossover frequency/400 Hz/500 Hz/5000 Hz W320 x H993 x D374 mm 46 kg/book
Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed.
Accessories: copy of the manual
Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg
The definitive edition of the Orthophone MC transformer. Comes with an MC/MM switcher SW, so you can switch easily. The rounded, warm sound quality is attractive. There is a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: boost ratio 27dB (3Ω, 47kΩ, 1kHz) input impedance 2Ω to 6Ω load impedance > 47KΩ channel balance <0.5dB frequency characteristics 10 to 100 kHz W153 × H95 × D110 mm 1.36 kg