1 unit only. Currently sold. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.22 Operation confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W W114 × H89 × D 92 mm 680 g
1 bottle only. Electrovoice 2-way speaker enclosure. Details are unknown, but the construction that seems to sound good is attractive (Murakoshi Yoichi)
Accessories: none
Main specifications: aperture diameter 175 mm, screw pitch 195 mm (diagonal) W240 x H635 x D440 mm 8.0 kg
The price has been reduced. 2026/5/1 sales price 69,800 yen Maintenance completed! 1 inch driver unit with high efficiency, wide bandwidth, and excellent linearity. You can enjoy the thick, calm sound. In particular, wind instruments blow up very well. If you want to relax and listen to jazz, why don't you do it? You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.2026.3.30 maintenance completed (diaphragm installation adjustment, pad dampener deteriorated mounting screw rust replacement, terminal contact part cleaning. Terminal ultrasonic cleaning. Insulating bushing replacement)
Accessories: none
Main specifications: throat diameter 2.5 cm impedance 16 ohms sound pressure level 117 dB frequency characteristics 800 Hz to 15 kHz crossover frequency 500 Hz or more voice coil diameter/material 4.4 cm, aluminum diameter 114 x depth 98 mm 3.7 kg
The price has been reduced! 2026/4/30 It will be a mid-range horn driver system with a sales price of 45,000 yen. Since it is for the mid-range, it does not produce high frequencies. It is used in speaker systems such as SENTRY III and SENTRY IVB, and is recommended for those thinking about 3-way. The exterior has dullness and small scratches due to aging. Serial 744 (Yonejima Satoshi)
Maintenance information: 2026.4.30 oscillator check OK
Accessories: No accessories
Main specifications: 8 ohms 500 to 6,000 Hz, 105 dB, crossover 800 Hz, diameter 104 x depth 87 mm, weight 2.2 kg (driver only)
※Since the age is different on the left and right, it is cheap. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. On the exterior, there is rust on the terminal part. (TAMURA Eiji)
Maintenance information: 2026.5.4 sound output confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
1 bottle only. Currently sold. By adopting a planar drive system, instead of turning the paper or resin cone back and forth like a normal speaker, an electric current is applied to the voice coil spread all over the surface to uniformly drive the entire diaphragm, so the sound starts up very fast, and the sound quality is clear with little distortion. In addition to the exterior and irregularities on the flat woofer, a feeling of use can be seen such as torn corners, dullness, small scratches, etc. on the saran net (Kobayashi Hitoshi)
Maintenance information: 2026.2.8 operation confirmed
Accessories: saran net
Main specifications: flat 2-way 12cm woofer (DMW-12S) 4cm tweeter (ST-8) 35 to 50,000 Hz 84 dB 8 Ω W155 x H210 x D80 mm 2 kg (actual measurement)
First arrival. Comes with original box! Roland's voice effector. It is easy to handle with intuitive operation and can also be used as an audio interface. It has a compact size and can be placed anywhere. There are small scratches and a feeling of use (Sasaki Shota)
Maintenance information: 2026.1.31 simple sound check OK
Accessories: original box, manual
Main specifications: vocal effect processor specified input level MIC IN -40 to -12dBu variable input impedance MIC IN (rear) 4.4 kΩ (XLR, TRS) MIC IN (front) 2.2 kΩ (stereo mini) output level LINE OUT -10 dBu output impedance LINE OUT 1kΩ PHONES 24Ω connection terminal rear MIC IN combo (XLR/TRS) front MIC IN MINI PHONES MINI LINE OUT L/MONO R/BYPASS STANDARD USB TERMINAL TYPE-B (AUDIO, MIDI COMPATIBLE) MIDI IN TERMINI TERMINI EFFECT TYPE ROBOT MEGAPHONE VOCODER HARMONY REVERB 4 VARIATION SCENE MEMORY 8 AD/DA PROCESSING 24 BIT SAMPING FREQUENCY 44.1 48 96 192 kHz POWER SUPPLY AA x 4 (alkali, nickel-metal hydride) or USB bus power supply, battery, operating time, alkaline, approx. 6 to 4 hours, nickel-metal hydride, approx. 7 to 5.5 hours, external dimensions approx. W174 x D133 x H58 mm, mass approx. 554 g
Disposal price reduction. Member prices are not applicable. 2025/9/20 sales price 30,000 yen*Only simple sound output can be tested; currently sold. Electro voice digital sound processor. If you're looking for one, don't miss it. Scratches are conspicuous (Daiki Goto)
Main specifications: W485 x H45 x 270 mm, weight 4 kg (actual measurement)
Disposal price reduction. Member prices are not applicable 2025/9/20 sales price 30,000 yen*Only simple sound output can be tested, and this is currently sold. Electro voice digital sound processor. If you're looking for one, don't miss it. Scratches are conspicuous (Daiki Goto)
Main specifications: W485 x H45 x 270 mm, weight 4 kg (actual measurement)
Comes with original box. Diaphragm for Electrovoice Driver DH1506. It was 5.2 ohms according to actual measurements (Oikawa Tetsuji)
Maintenance information: 2025.10.12 continuity confirmed
Accessories: instruction manual, original box
A 38cm double configuration enclosure that can be used as a center woofer or center speaker. The previous owner had an electro voice 38cm woofer installed. Comes with casters. There is a lot of feeling of use, such as uneven paint and bolt marks on the top plate. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W1045 x H790 x D604 mm 52.2 kg