The disposal price has been reduced. Member prices are not applicable. 2026/5/14 sales price 598,000 yen with original box! A voicing equalizer with an automatic sound field correction function built into a graphic equalizer equipped with a high-speed DSP. We have prepared a simple course where automatic measurement and correction can be performed with simple operation using a stylus, and a custom course where sound field correction can be pursued for the desired sound. In addition to coaxial digital/optical digital, the digital out is also equipped with the company's own HS-LINK. It is designed so that a maximum source input of 192 kHz/24 bits can be performed. The exterior has a scratch on the upper right front and other dullness (Mizusaki Ryo)
Maintenance information: 2026.5.14 Operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable, microphone, microphone holder, original box
Main specifications: digital input (HS-LINK x 1 COAXIAL x 1) digital output (HS-LINK x 1 COAXIAL x 1 OPTICAL x 1) analog input (RCA x 1 XLR x 1) analog output (RCA x 1 XLR x 1) USB terminal USB 2.0/3.0 (up to 128 GB) * for flash memory connection W465 x H161 x D396 mm 14.3 kg
A tube phono equalizer dedicated to optical cartridges announced by Mr. Fujiwara Nobuo of Uesugi Research Institute in the Tubing Kingdom No. 109 “My Handy Craft” project. You can enjoy the glossy, stretchy sound unique to the tube type. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.5.24 Operation confirmed
Accessories: power cable
Main specifications: 1 input system, 25.5 dB, output impedance 2.2 kΩ, W358 x H110 x D 240 mm, 5.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2026/5/9 sales price 2,980,000 yen*Casters are out of stock. It's been in stock for the first time in 10 years! 2001 limited edition autograph Outwardly, it is the same size as the original, but various parts have been changed to modern specifications, such as the adoption of Alnico magnets mounted mainly in the company's PRESTIGE series, and the materials of the wiring and enclosure. It is a masterpiece of warm knowledge that combines a sense of scale and speed. There is a stain on the saran net and a slight thread on the internal baffle. Serial 147 148 (Murakoshi Yoichi)
Maintenance information: 2026.5.3 sound output confirmed
Accessories: Saran net, instruction manual (copy)
Main specifications: 98dB (W/m 1kHz) continuous allowable input 135W (RMS) maximum allowable input 550W (instantaneous) input impedance 8Ω crossover frequency 1kHz frequency characteristics 20Hz to 22kHz enclosure material/birch laminated plywood 515 liters size W1075 x H1525 x D658 mm weight 101 kg
The price has been reduced. 2026/5/6 sales price 12,000 yen. * Since it is a commercial device, operation has been confirmed, but it is sold as is without warranty. The input/output terminals are XLR or phone. This professional 31-band stereo graphic equalizer is ideal for studio use. It looks like a studio mixer, but it can also be used for audio. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.2 operation confirmed
Accessories: carrying case
Main specifications: frequency band 31 band frequency characteristics 10 Hz to 30 kHz input terminals XLR x 2, phone x 2 output terminals XLR x 2, phone x 2, XLR for mono subwoofers x 1 W483 x H133 x D138 mm 2.3 kg
The price has been reduced. 2026/5/6 sales price 12,000 yen. * Since it is a commercial device, operation has been confirmed, but it is sold as is without warranty. The input/output terminals are XLR or phone. This professional 31-band stereo graphic equalizer is ideal for studio use. It looks like a studio mixer, but it can also be used for audio. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.2 operation confirmed
Accessories: carrying case
Main specifications: frequency band 31 band frequency characteristics 10 Hz to 30 kHz input terminals XLR x 2, phone x 2 output terminals XLR x 2, phone x 2, XLR for mono subwoofers x 1 W483 x H133 x D138 mm 2.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/12/16 sales price 1,180,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled! Officially imported by TEAC. Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid to low range. Serial 001568/001574 (Yonejima Satoshi)
Maintenance information: 2025.12.16 Maintained (unit maintenance: low range side edge softening treatment/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning center adjustment. Network maintenance: frequency characteristics check, ATT cleaning, faston terminal replacement, terminal cleaning. Exterior cleaning/simple repairs. (Saran net cleaning/repasting, frame repair)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
The cartridge uses a solid microlinear needle with no change in the radius of curvature of the needle tip to achieve low distortion. You can feel the depth of analog playback with clear sound images, positioning, and colorful sounds (Sasaki Shota)
Maintenance information: 2026.5.18 Sound output operation confirmed
Accessories: none
Main specifications: VM type playback frequency range 20 to 27,000 Hz output voltage 4.0 mV needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 2.7 kΩ load resistance 47 kΩ dead weight 6.4 g
The price has been reduced. 2026/3/4 sales price 30,000 yen. Large marble board with unspecified details. I'm going to have 1 autograph! If you've been looking for this size, take this opportunity. You can see the exterior, chips, marks, dullness, stains, and a feeling of use. ※Please contact us for shipping costs (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1000 × H20 × D1000 mm 55 kg (actual measurement)
Audiocraft lightweight shell with 2 lock pins. The high rigidity and solid sound are attractive. The exterior is dull and there are slight scratches on the mounting part (Takahashi Nobuyuki)
Maintenance information: 2026.1.29 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
※Shipping service. Special Feature = Listening and Comparing 300B Current Vacuum Tubes/Sound Altec Coaxial 409B/ Audition of 19 New High Value Amplifiers/Listen to UK DECCA, EMI, and LEAK Cartridges/Build a WE310A Line Preamp Kit/My Handicraft = Stereo Signal Divider TAD1 (Production ◎ Uesugi Yoshiro), Phono Equalizer Amplifier KSE37 (Production ◎ Koreeda Shigeharu), 300B Single Stereo Power Amplifier (Produced by Yoshio Nasu) /Published 2005.8.28. Since the photograph is a sample, the actual item may be broken or have markings etc.
※Shipping service. Special Feature = 2010 Spring Featured New Product Audition/Hidden Names Utilizing Output Tubes 10 Models Audition 12BH7A ECL805 6AQ5 VT25 398A 45 e2D PX25/MY HANDICRAFT My Handicraft Uesugi Yoshiro - EL34 Parallel Push Pull Monaural Power Amplifier TAP37 Nasu Yoshio - 6V6 Single Stereo Power Amplifier OS-V6/2010/4/26 Issued. Since the photograph is a sample, the actual product may be broken or there may be markings etc.