Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
Manufacture:EDISON
Price: JPY 92,727
- description
- Disposal prices have been reduced. Member prices are not applicable. 2013/7/23 sales price 298,000 yen ※ longitudinal vibration SP special gramophone. serial 6083. The Thomas Edison Sound is now being revived after 100 years. I am impressed by the well-conceived metal horn system, rotation adjustment mechanism, volume adjustment mechanism, etc. in the old fashioned way. There are scratches etc. on the cabinet that make it feel old. It has been repaired to a level where there is no anxiety about playback. Can be used normally (Yasuhito Koshihama) Maintenance information: 2013.2.17 Maintained (sound box repair, spring repair, rotation adjustment mechanism repair, brake repair) 2013.7.23 operation checked Accessories: handle, snail Key Specifications: The needle tip of the sound box is a diamond. Horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
Manufacture:EDISON
Price: JPY 153,636
- description
- Disposal price reduction. 2013/9/16 sales price 298,000 yen longitudinal vibration SP special gramophone. serial 67906. Thomas Edison's rise to fame was the invention of the gramophone in 1877. If you think about the sound from 100 years ago, it's indescribably moving. Immerse yourself in your unique view of the world. The exterior has scratches, dirt, etc., and there is a cabinet crack on one side of the back (Oikawa Tetsuji) Maintenance information: 2013.7.31 Maintained (brake shoe replacement, position adjustment, rotation system disassembly repair) *Normal SP cannot be regenerated. Please prepare SP (thick SP) for longitudinal vibration. Accessories: handle, snail Main specifications: horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
- description
- The disposal price has been reduced. Member discounts are not applicable. 2023/5/5 sales price 9,800 yen. ※1 bottle only. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. There is a feeling of use such as peeling and scratching on the label (Mizushima Itsuro) Maintenance information: 2023.5.5 operation confirmed Accessories: none Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
- description
- ※It is inexpensive because it is in poor condition such as paint peeling and solder marks. Electrovoice's finest horn tweeter. It is a diffraction type unique to the Electrovoice, which is slightly larger than the T35. A phenolic diaphragm with silk as the core material, and an Alnico V magnet comparable to a scoker are used for the magnetic circuit. The exterior has scratches, paint peeling, and solder marks on the terminals. One side plate is missing (Yonejima Satoshi) Maintenance information: 2024.5.9 oscillator test is good Accessories: No accessories Main specifications: playback frequency band 3,500 to 15 kHz impedance 8 ohms recommended crossover frequency 3.5 kHz or higher W73 x H191 x D125 mm 3.2 kg
- description
- Digital sound repair machine. By predicting an ultra-high frequency range of 20 kHz or more and outputting it in addition to the original sound, it feels smooth, and the sound quality changes to very comfortable to listen to. There are no noticeable scratches (Sasaki Shota) Maintenance information: 2024.5.10 operation confirmed Accessories: none Main specifications: 1 RCA input/RCA output each, 5 stage effect switching size W132 x H71 x 334 mm weight 960 g
- description
- ※1 bottle only. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi) Maintenance information: 2024.5.8 oscillator check is good Accessories: pedestal, instruction manual Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
- description
- ※The pedestal is missing. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi) Maintenance information: 2024.5.8 oscillator test is good Accessories: instruction manual Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
- description
- ※1 bottle only. A full range unit that combines an aluminum alloy HR diaphragm and a pure magnesium ridge dome diaphragm. Compared to conventional paper units, it has a slightly better transparency and microwave feel. The exterior is stained with corn paper, paint marks and scratches on the frame (Satoshi Yonejima) Maintenance information: 2024.5.6 sweep test is good Accessories: original box Main specifications: impedance 4 ohms minimum resonance frequency 72 Hz playback frequency band F0 to 10 kHz output sound pressure level 85.5 dB
- description
- The price has been reduced! 2023/5/9 sales price 19,800 yen It's cheap because it's in poor condition! *Currently sold. A horn-shaped tweeter that is familiar to the ear. The appeal is that it's easy to read, but it doesn't hit your ears, so you won't get tired of listening. On the exterior, in addition to a feeling of use such as dullness and small scratches, some terminals are damaged (Asaine Tomoho) Maintenance information: 2024.5.9 operation confirmed Accessories: none Main specifications: horn type tweeter frequency characteristics 2.5 kHz to 22 kHz 8 ohms cutoff frequency 2.3 kHz recommended crossover 3.5 kHz efficiency 105 dB W83 x H83 x D94 mm 1.1 kg
- description
- SFP fiber optic cable OS2 single mode LC optical patch cable 10m ideal for 1G/10G/40G/100G Ethernet connections (Sasaki Shota) Accessories: case
- description
- SFP fiber optic cable OS2 single mode LC optical patch cable 10m ideal for 1G/10G/40G/100G Ethernet connections (Sasaki Shota) Accessories: case
- description
- SFP fiber optic cable OS2 single mode LC optical patch cable 10m ideal for 1G/10G/40G/100G Ethernet connections (Sasaki Shota) Accessories: case
Manufacture:Guiniphone
Price: JPY 72,545
- description
- Sound can be produced, but there is uneven rotation and sound cracking, so it will be sold as it is. The volume is not loud, but it has a soft tone that creates a nostalgic atmosphere. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka) Maintenance information: 2021.11.27 Operation confirmed Accessories: handle, paper horn Main specifications: W278 × H78 × D300mm 3.7kg (actual measurement)
Manufacture:HAMILeX
Price: JPY 31,818
- description
- Hamilex compact 4-tier rack. The design is simple and you won't get tired of it. The shelves can also be adjusted, making it easy to use. There are bats and scratches on the exterior (Murakoshi Yoichi) Accessories: none Main specifications: Top plate load capacity: 100 kg or less Shelf board load capacity 50 kg or less Bottom plate load capacity 100 kg or less Total load capacity 250 kg W591 x H735 x D550 mm Weight 31.5 kg
- description
- Hamilex speaker stand Not only is the small speaker, but it also has a sturdy construction with a load capacity of 50 kg. There is a feeling of use on the exterior due to small scratches etc. (Tomoho Asae) Accessories: none Main specifications: load capacity approx. 50 kg, top plate W200 x D240 mm, overall W240 x H450 x D300 mm, weight 4 kg/1 unit
Manufacture:HAMILEX
Price: JPY 1,818
- description
- This is only the top plate part of the company's GT-9721. There are scratches, stains, etc. (Oikawa Tetsuji) Accessories: none Main specifications: W1165 x H45 x D580 mm
- description
- The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji) Accessories: fastener Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
- description
- Roadie's representative 2-way speaker system. A luxurious magnetic circuit was added, and a machined aluminum horn tweeter of unusual quality for this size was used. Along with its elegant look, you can easily enjoy the thick domestic vintage sound. There are small scratches, stains, and warps on the top surface and side angles (Murakoshi Yoichi) Maintenance information: 2024.2.17 sound output confirmed Accessories: saran net Main specifications: 2 way, 2 speakers, dumped bass reflex system, bookshelf type impedance, 8 ohms, output, sound pressure level, 88 dB, dimensions W360 x H610 x D340 mm, weight 22 kg
Manufacture:HMV
Price: JPY 45,273
- description
- Sound can be produced, but there is uneven rotation and sound shake, so it will be sold as it is. The sound box is HMV No.4. The volume is not large, but you can hear an elegant tone in the high range with fine grain. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka) Maintenance information: 2021.11.28 Operation confirmed Accessories: handle Main specifications: W290 × H150 × D425mm 7.0kg (actual measurement)
- description
- The price has been reduced. 2023/12/31 selling price 19,800 yen Infiniti's slightly rare center speaker. Unlike a domestically produced center speaker that mainly plays the vocal band, you can feel the nuance of a Scandinavian speaker that plays as if it were floating in space. There are small scratches on the exterior, and the saran net is partially torn (Oikawa Tetsuji) Maintenance information: 2023.12.31 operation confirmed Accessories: none Main specifications: 3 way 4 speakers 6 ohms W509 x H230 x H270 mm 12.5 kg
- description
- Pair tube (checked with a tube checker) beam quadrupole. There is a tea box. Measured value 36,34/30 (rejection value) *The pair was determined based on the GM value measured by the testing machine TV-7. The ※ logo is scratched, so it's a bargain.
- description
- Pair tube (checked with a tube checker) beam quadrupole. There is a brown base and original box. ※The logo is scratched.
- description
- Set of 4 Use ICP damping spacers and IDS composites together as tuning goods to counteract speaker vibrations. *Cannot be used as a receiver for metal spikes. There are scratches and threads on the exterior (Yonejima Satoshi) Accessories: No accessories Main specifications: diameter 35 mm x 3 mm (thickness)
- description
- The price has been reduced! 2024/3/4 sales price 59,800 yen ※The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. Scratch marks and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi) Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.) Accessories: No accessories Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
- description
- The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji) Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421) Accessories: none Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
- description
- JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki) Maintenance information: 2024.5.3 sound output confirmed Accessories: none Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
- description
- Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso) Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check) Accessories: none Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- ※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki) Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check) Accessories: No accessories Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
- description
- Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso) Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check) Accessories: none Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- ※It's cheap because it's missing! An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. The exterior has a feeling of use such as dullness, scratches, and angles (Asaine Tomoho) Accessories: none
- description
- Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 8091 8074 (Hiroki Aso) Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 rust and insulation bushings, deterioration replacement. The capacitor used for terminal cleaning is a Dayton attenuator switch contact cleaning crossover 800Hz check red terminal cap partial deterioration replacement) Accessories: none Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
- description
- ※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi) Accessories: No accessories Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
- description
- ※Inexpensive because there are scratches and paint peeling. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound (Oikawa Tetsuji) Maintenance information: 2024.5.3 operation confirmed Accessories: none Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
- description
- Maintained! A 1500 Hz crossover network perfect for combining the LE14A with the 175DLH and LE175. The exterior is dull and has small scratches (Oikawa Tetsuji) Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced) Accessories: none
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 79,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 53400 63923 (Tomonori Asaine) Maintenance information: 2023.12.15 Maintained (diaphragm installation adjustment throat cleaning DCR 63923/8,3 ohm, no vibration damage (DCR 53400/7.8Ω vibration has scratches and small dents) Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
- description
- The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto) Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch)) Accessories: none Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
- description
- The price has been drastically reduced! 2024/4/28 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance even when combined with various woofers and tweeters. The exterior has a feeling of use such as dullness, small scratches, and abrasions (Asaine Tomoho) Maintenance information: 2024.4.28 Maintained (diaphragm installation adjustment Replace the following parts DCR (no scratches on the 164164/6.3 ohm diaphragm) DCR (63913/6.4.ohm diaphragm, no scratches)) Accessories: none Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
- description
- Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Mizusaki Ryo) Accessories: none Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
- description
- Maintained. The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has dullness and scratches due to use over time, serial 18254 18275 (Asaine Satoshi Law) Maintenance Information: 2024.4.16 Maintained (Screws, Insulated Washer Parts Replacement Switch Contact Cleaning) Accessories: none Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
- description
- ※It has been repainted and is inexpensive because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo) Accessories: screws Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! An original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine) Accessories: MA15 woofer grill net Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
- description
- The price has been drastically reduced! 2024/3/17 sales price 69,800 yen JBL professional tweeter. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. The exterior has dullness and small scratches due to aging. Serial 81380/52416 (Yonejima Satoshi) Maintenance information: 2024.3.17 sweep test good Accessories: No accessories Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
- description
- The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji) Maintenance Information: 2023.10.6 Oscillator Test Good Accessories: no accessories Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
- description
- The disposal price has been reduced. Member discounts are not applicable. 2024/4/27 sales price 1,680,000 yen Hi-Fi Hall first arrival! This is the flagship model of the current KEF Reference series. The expanse of the dynamic sound field and natural sound quality that can't be imagined from this 205mm wide seems to make you forget that this speaker is a tall boy. The exterior, with abrasions and scratches on one side, is dull, and there is only a slight feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.4.26 Operation confirmed Accessories: saran net, spikes, original box Main specifications: Unit used: 5 inch Uni-Q driver, 6.5 inch woofer x 4 crossover 450 Hz, 2.1 kHz 88 dB impedance 4 ohms W205 x H1,350 x D462 mm 60.2 kg
- description
- A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji) Accessories: No accessories Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
- description
- The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI) Accessories: insulator T-PROP, screws Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
Manufacture:LEAD CONSOLE
Price: JPY 6,364
- description
- Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki) Accessories: None Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine) Maintenance information: 2024.3.29 Operation confirmed Accessories: Speakon remote control power cable setup manual Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
- description
- The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi) Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518) Accessories: remote control, power cord Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
Manufacture:Lo-D
Price: JPY 13,636 Sold Out
- description
- *Currently sold. Slim stereo power amplifier using MOS-FET. An eye-catching retro design with an LED meter. Although it is an entry model, it is one with a high level of satisfaction. There are small scratches and abrasions throughout. Serial 0005991A (Fujisawa Yukishi) Maintenance information: 2024.5.6 operation confirmed Accessories: No accessories Main specifications: effective output 50W+50W W440 x H105 x D250 mm approx. 6.0 kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
