An integrated SACD player equipped with the VRDS-NEO VMK-3.5-20S with a refined drive circuit design for the drive. The SN is good, and the sound quality is both high resolution and smoothness, so you can fully experience the power of modern audio. It is an excellent product that can also be used as a standalone DAC compatible with a maximum of 24 bits/192 kHz. There is a slight feeling of use such as scuffs on the exterior, the top angle of the main unit, and the back, and small scratches scattered on the remote control. Serial 220007 (Murakoshi Yoichi)
Maintenance information: 2024.4.24 sound output confirmed
Accessories: remote control, power cord, instruction manual
Main specifications: Playable disc SACD, CD, CD-R, CD-RW analog audio output RCA x 1, XLR x 1 digital audio output coaxial digital audio input coaxial, optical, USB-B word sync input format BNC W445 x H162 x D438 mm 31 kg
※Because it smells like tobacco, it's cheap. Maintained! Custom edition of the large power amplifier PA-70 from the STASIS circuit. Supported by a huge 700W toroidal transformer, the speaker driving power, which consists of a 90A power supply, is one of the best among domestic amplifiers. Fortissimo, which excels at delicate depictions but doesn't make you feel limited, is unique to this large amplifier. The exterior is dull and scratched. Serial 11179 (Fujisawa Yukishi) A
Maintenance information: Maintained on 2024.4.26 (bias part and constant current part semi-fixed VR, output relay, and damaged screws were replaced, additional installation due to lack of cable protector, solder crack correction, bias and offset adjustments, output sound check, dirt removal and cleaning)
Accessories: No accessories
Main specifications: rated output 225W+225W (8Ω) W435 x H200 x D421 mm approx. 28.5 kg
Digital cable, 1.0m, RCA terminal, cotton blade, riz wire conductor with a stranded coaxial sheath structure, is a nuclear-free type, but it is a cable that makes you feel strong in the mid-range similar to having a core. The plug is dull, and the sheath has fading and fraying over time ※Please connect the red plug ring side to the output terminal and the white plug ring side to the input terminal (Kojima Yosuke)
Accessories: none
Digital cable, 1.0m, RCA terminal, cotton blade, riz wire conductor with a stranded coaxial sheath structure, is a nuclear-free type, but it is a cable that makes you feel strong in the mid-range similar to having a core. The plug is dull, and the sheath has fading and fraying over time ※Please connect the red plug ring side to the output terminal and the white plug ring side to the input terminal (Kojima Yosuke)
Accessories: none
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
The stereo to mono conversion cable 1.0m SD-1010 is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
The stereo to mono conversion cable 1.0m SD-1010 is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. The area around the plug is dull, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation ingenuity is necessary so as not to put a load on the plug or jack to be connected (the cable length at the end of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, Connect the terminal side where the core box is located to the input terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
The 1.5m SD-1010 stereo to mono conversion cable is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
Digital cable, 1.0m, RCA terminal, cotton blade, riz wire conductor with a stranded coaxial sheath structure, is a nuclear-free type, but it is a cable that makes you feel strong in the mid-range similar to having a core. The plug is dull, and the sheath has fading and fraying over time ※Please connect the red plug ring side to the output terminal and the white plug ring side to the input terminal (Kojima Yosuke)
Accessories: none
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. There is dull writing around the plug, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation requires ingenuity (the cable length at the tip of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, and input the terminal side with the core box Please connect to the terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. The area around the plug is dull, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation ingenuity is necessary so as not to put a load on the plug or jack to be connected (the cable length at the end of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, Connect the terminal side where the core box is located to the input terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
The price has been reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/17 sales price 278,000 yen This is an advanced model of the company's SACD player with a beautiful blaster white body color. It has a higher fidelity tone than conventional luckstones, and the sound image with high instantaneous power, especially the elasticity in the mid and low frequencies, is attractive. On the exterior, there are scuffs scattered on the top plate and side plate. Serial G11100859D (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: SACD/CD player equipped with PCM1792 x 2 D/A converter W440 x H140 x D383 mm 15.5 kg
The price has been drastically reduced! 2024/4/20 sales price 330,000 yen Maintained! 100V specification genuine Baes product. A power amplifier representing the McKinn Golden Age. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT1245 (Fujisawa Yukishi)
Maintenance Information: 2024.4.8 Maintained (Electrolytic Capacitor Replaced. Replace the meter and display lamp. Apply heat-resistant tape. Urethane sheet deterioration replacement. Clean switches and volumes. Card edge contact cleaning. Solder correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/17 sales price 498,000 yen The company's best integrated amplifier designed by generously pouring the technical power of the Si 3000. The design, such as dual mono construction, the shortest signal path, and the chassis created by making full use of alloy technology, is a masterpiece that gives off a unique personality. The driving power is excellent in the smooth mid-high range with a high sense of SN, and in the mid to low range with a high sense of sound pressure. The highest amount of information as a premain amplifier is attractive. There are small scratches on the exterior. Serial Y 2008 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (SP knob removal screw correction and cleaning. Cord clamp misalignment fix screw misalignment fix Internal inspection, cleaning, remote control, light reception check. Bias and offset checks. (Voice check for each input/output)
Accessories: remote control, instruction manual, power cord
Main Specifications: Output: 175W+175W (8Ω) Input Terminals: RCA LINE x 5 (Caldas Rhodium Plating), XLR LINE x 1 (No. 2 HOT) Output Terminal: RCA x 2 Frequency Characteristics: 10Hz - 35kHz
W450×H170×D480mm 27kg
Maintained! Comes with stand (DK-8000). A model that has improved the network box of the Diaton 50th anniversary model DS-8000. I am overwhelmed by the clear, detailed treble from Pure Boron and the thick mid-low range compared to the 2S-305 broadcast monitor. Also, the quick start-up sound, which is unimaginable from its size, is excellent. There is a feeling of use in appearance, dullness, light scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2022.10.21 maintained (exterior stand network exterior cleaning/large scratch filler repair/line scratch simple touch up (repair marks remain) saran net stain/frame cleaning mid-edge softening treatment unit detachable one-sided tweeter disassembly and disconnection repair)
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, floor type, anti-magnetic type, 5 ohm 35 Hz to 40,000 Hz 93 db/w/m main unit W500 x H870 x D442 mm network box W370 x H130 x D287 mm weight body 58 kg, network 8 kg
The price has been reduced. 2024/4/16 Sales price 198,000 yen Edge softening treatment, etc. Maintenance completed! Comes with a 7.5 kg DK-2000Z stand dedicated to the DK-2000Z class weight! The DS-2000Z thoroughly sought realistic sound. The sound quality is beautiful and glittering, conveying even the feeling of air with sound. Please try the high resolution sound source. There is a feeling of use due to appearance, dullness, light scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 204.4.16 maintenance completed (exterior veneer float repair/cleaning, saran net replacement, woofer edge softening treatment)
Accessories: instruction manual, saran net
Main specifications: 3-way sealed system, bookshelf type speaker impedance 6 ohms playback frequency band 27 Hz to 80000 Hz output sound pressure level 90 dB maximum input 180 W dimensions W380 x H725 x D315 mm (356 mm with net) weight 37 kg stand dimensions W380 x H170 x D315 mm weight 27.5 kg
This is a replacement needle compatible with Hitachi MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The disposal price has been reduced! (Member prices are not applicable) 2024/3/27 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. On the exterior, there are scuffs scattered on the top surface, and many other small scratches can be seen. Serial 22063 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (INPUT DIN connector replaced, DW4P-RCA female cable created. All internal checks. Lch power stage Tr x 3, DC cut C, gain setting C exchange. AC line fuse installation. Operation check)
Accessories: power cord, connection cord
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. There is a feeling of use such as dullness. Serial 3121 (Takasaki Atsushi)
Maintenance information: 2024.3.22 maintained (INPUT DIN4P and AC connector replacement, DIN4P-RCA x 2 (1m) creation, internal check, DC cut C, coupling C replacement, RCH offset VOL exchange, constant change in constant voltage circuit)
Accessories: copy of manual, power cord, connection cord
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
※The sound output operation has been confirmed, but there is a slight band gap, and since it is cheap, it will be handed over as is. Trio quadruple varicon-type FM/AM tuner. The high range is moderate, but the fresh, thick sound that is difficult to obtain with a synthesizer tuner is attractive. The exterior has spots, small scratches, and rust spots (Mizusaki Ryo)
Maintenance information: 2015.3.4 manufacturer maintenance (The detection circuit offset has been adjusted. Other adjustments have been made to RF, detection, VCO, separation, meter, etc. (There is a contact problem with the switch and volume, but since parts are not available, the contacts have been cleaned)
Main specifications: W430 x H149 x D376 mm 8 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/30 sales price 100,000 yen Maintained! D/A converter incorporating a 20 bit DAC chip manufactured by Barbrown. The mellow tone is attractive. It adds an analog-like nuance to the sound of the CD. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2023.12.30 Maintained (replacement solder and pattern correction board electrolyte cleaning due to loss of exchange resistance due to electrolyte condenser fluid leakage, input/output voice check for each FS)
Accessories: none
Main Specifications: Barb Brown 20-bit heavyweight toroidal power transformer W430 × H70 × D280 mm 7.5 kg
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/2/5 sales price 2,000 yen ※1 bottle only. The speaker stand compatible with BOSE's various surround speakers is compatible with the 3,2,1 series, AMS-series, AM series, FreeStyle, and LS series. The exterior is dull and has a feeling of use. (ASAINE Tomonori)
Accessories: none
Main specifications: W177 x H968 x D254 mm 3.1 kg
This is a replacement needle for Hitachi. Compatible with MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Maintained! The mid-range α series uses an α-X balance circuit that blocks the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, the sound separation is good, and it is a classic premain that will keep you entertained regardless of genre. The exterior has rust spots, paint bald, etc. (Mizusaki Ryo)
Maintenance information: 2023.2.1 maintained (main amplifier output relay replacement, transistor and capacitor replacement, MM/MC, reckout switch disassembly, polishing grease application, solder main part repair, various volumes, switch cleaning, interior and exterior inspection cleaning, offset adjustment, operation inspection)
Accessories: copy of instruction manual
Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
Genuine Hitachi, genuine replacement needle for IFS-240 The cantilever is slightly turned to the left. Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Genuine Hitachi, genuine replacement needle for IFS-240 Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to Hitachi DS-ST26 Replacement needles for VFS-260 and VFS-261. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Output transparent pair for push-pull output 40W primary: 8kΩ secondary: 4-8-16 ohms W83 x H104 x D78 mm 2.3 kg/piece with original box (no label on one side) There are scuffs and line scratches in places (Kojima Yosuke)
Accessories: original box
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
※Shipping service. Special Feature = Latest Analog Player Audition Report 1/20 Commemorative Special Event “Unforgettable, Famous Analog Devices and Masterpieces” /Listen to Hot New Speakers/Talk About the Appeal of Ashkenazi Analog Records/Sound the Famous Machine “SONY SS-AR1” /Listen to the Full Technical Brain System/Test US RGPC Power Enhancer/Test the Power Supply Enhancer by Type, New Generation Model Edition/H20.7.20 Published /Model: MAJIK LP12/TD-550BC/RPM 9.1/VPS PL-L/Aurora/Ultra Eminent BC/HAMP30 HAMP05/A-S1000/TT-15S1/VPI Aries Scout/Solid Machine/Ambient with Unify9/Orbese-Unv1/System SG2 Phantom/LS3 5A/MSM-1/AM-105i/SX- M3/G2000/G1 GIYA/T-88/IA21/XM-300B/CA-03L/8834M/M-3BC M-A3S/MFSL-C3.5/AT-OC9ML 2/PH3D/excesioAle opus/ The photograph is a sample, so the actual item may be broken and there may be writing etc.