Set of 4 speaker stands Block type can be installed either vertically or horizontally. It is a very convenient and useful item for installing medium sized speakers, etc. There is a feeling of use on the exterior, such as dullness or peeling of the outer sticker ※ There is content like sand inside (Asaine Tomoho)
Accessories: none
Main specifications: Scythe W110 x H190 x D390 mm weight 6.6 kg (actual measurement)
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The screw terminal block comes with a 4-pole cover, which is useful for extending and distributing speaker cables. The exterior is dull and there is a feeling of use such as writing (Tomoho Asaine)
Maintenance information: 2024.5.7 continuity confirmed
Main specifications: size W70 x H21 x D34 mm
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
Unspecified power cable 2.0m. The plug is Panasonic WF5018K, and the connector is made by Global Electronics. This cable is relatively easy to handle. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/10 sales price 69,800 yen Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: output 45W+45W (8Ω, Class B operation) 10W+10W (8Ω, Class A operation) 20Hz-20kHz power consumption rating 190W maximum 300W external dimensions 436 x H144 x D323 mm weight 13.5 kg
Maintained! It's a simple and easy to use preamp. Compared to the C-2, it has a clearer impression and allows you to listen to acoustic sources such as vocals and violin with a smooth sound. PHONO is also fully compatible with MM and MC. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.5.9 Maintained (replacement of faulty capacitors in the power supply circuit, replacement of power lamps. Solder correction on all circuit boards. (Disassemble switches, polish contacts and apply contact cleaner)
Accessories: none
Main specifications: PHONO2 system (MM/MC) LINE 2 system TAPE2 system size W435 x H96 x D369 mm weight 7.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/6 sales price 49,800 yen Maintained in 2023/7! A control amplifier that inherits the sound of Yamaha's famous C2a. A highly reliable phono equalizer is used, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. In addition to dullness and small scratches on the exterior, there are scratches on the front sub-panel and insulator marks on the top plate. Serial E052015SU (Hiroki Aso)
Maintenance information: 2023.7.13 Maintained (PHONO circuit IC/capacitor replacement, main board, soldering, deterioration, all correction, volume type, contact correction, long time sound output check)
Accessories: copy of instruction manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
Maintained! Stereo power amplifier equipped with output impedance control. It is a power amplifier from the heyday of separation, which is supported by a solid power supply unit and chassis, and can firmly reproduce even the smallest nuances. There are dullness and small scratches on the exterior (Tomonori Asae)
Maintenance information: 2024.5.9 Maintained (replacement of defective output relay contacts. Replace deteriorated capacitors in the power supply circuit. (Repair and adjustment within each circuit)
Accessories: none
Main specifications: rated output 120W+120W (8Ω Class B) 30W+30W (8Ω Class A) rated power consumption 330W W435 × H146 × D381 mm 21kg
Maintained! *Remote control is out of stock. A control amplifier that inherits the sound of Yamaha's famous C2a. It uses a highly reliable phono equalizer, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. There is overall dullness and small scratches (Tomoho Asaine)
Maintenance Information: 2023.12.8 Maintained (PHONO circuit repair adjustment. Power supply circuit input circuit and other circuit board soldering correction. Disassemble the PHONO switch and polish the contacts and apply contact cleaner. Contact correction for other volume types. (Long time sound check)
Accessories: copy of the manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
High-purity OFC (oxygen-free copper/4N) is used as the 0.5m pair conductor of the XLR cable to achieve transparent sound. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The price has been reduced! 2024/5/6 sales price 29,800 yen 6 month warranty. Fourth generation model of Victor's masterpiece speaker SX-500 series representing the 90s. Alnico magnets are used in all units, and the woofer unit has particularly excellent low-level reproducibility, contributing to improved clarity and good tone during quiet sounds. The exterior has scratches and dullness over time. Serial 10800021 (Yamato Yuki)
Maintenance information: 2024.5.6 sweep test is good
Accessories: none
Main specifications: 2 way, 2 speakers, sealed system, bookshelf type, anti-magnetic type, 20 cm cone type for low range/3.5 cm dome type impedance 6 Ω for high frequency, output sound pressure level 90 dB, W270 x H454 x D 293 mm, weight 12.5 kg/book
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
MiniHDMI to HDMI converter cable 5.0 m Details are unknown, but it is a thin, lightweight cable that is easy to handle. The sheath smells like tobacco (Takahashi Nobuyuki)
Maintenance information: 2024.5.4 unchecked
Accessories: none
※Since there is no main unit, operation has not been checked. Nagaoka replacement needles. This is a TRIO N-39 compatible product. As for the exterior, the needle tip is slightly to the left (Hiroki Aso)
Maintenance information: 2024.4.7 operation unchecked
Accessories: none
Main specifications: Appropriate needle pressure 1.5g
Technics machined aluminum EP adapter It's a convenient item to have for listening to singles. There is a feeling of use such as dullness (Hiroki Aso)
Accessories: none
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of aluminum die-cast with high rigidity, and brings out the characteristics of the cartridge (Hiroki Aso)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
The price has been drastically reduced! 2024/4/26 sales price 178,000 yen Maintained by TEAC! VRDS-25 rigid menism final model. This is a popular model used by JAZZ/ROCK fans with a strong housing and a highly accurate VRDS mechanism, and has high resolution and clear contours. Spikes are attached to the solid 8 mm thick bottom plate, and the excellent construction with an excellent sense of reliability is also attractive. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.26 Maintained (All parts have been inspected. We have confirmed wear on the tray belt, clamp belt, and turntable bearings. Tray belt, clamp belt, and turntable bearing replacement. (Check operation by cleaning and lubricating the pickup and mechanical parts)
Accessories: Remote control instruction manual copy
Main specifications: multi-bit DAC, 25 bits, 8 times oversampling digital filter, W442 x H145 x D344 mm, weight 23 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches, dullness, etc. Serial 30300 (Tomoho Asaine)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
Operation check)
Accessories: remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
The price has been reduced! 2023/4/23 sales price 8,000 yen*Set of 3 A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: original box spike base
Main specifications: Gradation cast iron, matte black finish, diameter 60 x height 45 mm, weight 800 g/piece, plate diameter 35 x height 5 mm
Set of 4 A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
Set of 4 A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2023/4/2 sales price 250,000 yen ※We have newly created head amplifier modules ✕ 2, Phono equalizer modules x 2, and flat modules x 2. Maintained! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight Sony sound with a sense of speed similar to the TA-E900. I want to use the look and sound in combination with the company's Power TA-N902. The exterior has small scratches and is dull. Serial 200499 (Takasaki Atsushi)
Maintenance information: 2023.4.2 Maintained (2 flat modules replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2023.1.5 Maintained (Phono equalizer module x 2 replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2022.8.31 Maintained (head amplifier module ✕ 2, capacitor, semi-fixed resistor, relay, LED, lamp, Capcom, power cord replacement. All SW, VR disassembly and cleaning. Re-solder the deteriorated part of the solder surface of the board. Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting a power amplifier.)
Accessories: copy of instruction manual
Main specifications: 2 phono inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
Maintained! Even though it was an entry-class CD player at the time, I felt that it was well-made. You can enjoy clear, tight low range and high frequency sound with good visibility. Many abrasions can be seen on the exterior and sides, and there are also small scratches, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.10.30 Maintenance completed (servo mechanical disassembly, rail, pickup oilless metal rust removal polishing. Tray drive belt replacement. Optical lens cleaning (Output VR cleaning)
Accessories: remote control, copy of instruction manual
Main specifications: center mechanical mount system D/A conversion method advanced H.D.L.C advanced pulse D/A converter score digital filter W430 x H125 x D375 mm 12 kg
Maintained! A hit model during the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 212487 (Hiroki Aso)
Maintenance information: 2024.4.26 maintained (MUT switch, push slide, SW exchange, volume VR, sound replacement, speaker relay due to deterioration, 14 parts replacement, other input selector, cartridge selector, each SW disassembly contact, polishing grease application, etc., DC bias balance adjustment, each input/output sound output check)
Accessories: copy of instruction manual
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The price has been reduced! 2024/4/23 sales price 12,000 yen This is a Shure mid-size model equipped with a solid diamond needle. The resolution is high, and the cuts and crisp sound with a sense of energy in the high frequencies are attractive. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.4.23 sound output checked
Accessories: none
Main specifications: mm cartridge output 4.0 mV needle pressure 0.75 to 1.5 g frequency characteristics 20 to 20,000 Hz dead weight approx. 6.5 g
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The needle tip is slightly turned to the right (Tomonori Asae)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
PSE standard product. Recommended parts for those looking for a high quality slim connector. It is a neutral character with no quirks. There are abrasions ※ cord bushing is missing (Tomoho Asaine)
Accessories: none
Main specifications: maximum diameter standard 8.5 mm/maximum 13.0 mm (when cord bushing is removed)
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
RCA cable 0.7 m pair 6N copper+OFC hybrid collet chuck plug has no prominent characters, and it is a cable that allows you to enjoy music naturally. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (LED installation (original not available) poor power stage transistor deterioration, defective transistor in the board → replacement. Bias adjustment, operation check.)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/11/30 Sales price 128,000 yen Maintenance completed! A famous machine 44 with an easy-to-handle RCA terminal added to the rear terminal of the Quad control amplifier. The British QUAD's small preamp is a perfect balance between freshness and intensity of character. When paired with the same speakers made in England, you can enjoy a calm, high-quality sound. Personally, I recommend the combination with QUAD405. *There is a slight sound leak even when the volume is reduced due to initial type specifications. The RADIO next to the back input DISC is the AUX input (Murakoshi Yoichi)
Maintenance information: 2023.11.29 maintenance (balance VOL, filter VOL, each rotor legal → oil cleaning, no AC switch spark killer → installation, tantalum C replacement in each board, power supply filter C replacement, input cable DW5P creation.)
Accessories: DIN cable, power cord, instruction manual (copy)
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/27 sales price 148,000 yen Maintained! It is a model that is small yet has a calm and glossy tone. A combination with European speakers is recommended along with the company's Pre-44. A slightly more modern taste than the 405 has been added. There is a feeling of use on the exterior, such as dullness, small scratches, and peeling paint. Serial Q078428 (Hiroki Aso)
Maintenance information: 2024.4.27 maintained (internal dismantling check, power Tr driver, Tr check, replacement of each C in the board, partial soldering, defect correction, bottom rubber foot mounting operation check)
Accessories: copy of instruction manual DIN to RCA (female) conversion cable, power cable (general purpose)
Main specifications: 100W+100W W341×H115×D195mm 9.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/22 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. The exterior has a feeling of use such as dullness. Serial 41000 (Tomoho Asaine)
Maintenance Information: 2024.3.22 Maintained! (Internal check DC cut C, gain setting C, etc., exchange Tr, etc. check operation check, DIN4P-RCA female cable creation)
Accessories: power cable
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
※Only 1 speaker cable 2.0m terminal banana QED 40th anniversary model cylindrical 6-core structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.5.2 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/5 sales price 500 yen The sound quality of only one 2.0m QED speaker cable feels thick and flexible throughout the entire range. You can use it regardless of genre. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
This is a set of needle tip cleaning solution and brush. Normally, you can use a dry method with only a brush, and a wet method that uses liquid when the dirt is severe (Hiroki Aso)
Accessories: brush case
※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of the ReSona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none