Unit magnetic circuit gap cleaning center adjustment, full maintenance from network maintenance to exterior has been completed. TANNOY monitor machine SRM-12X! It is a versatile speaker with excellent phase characteristics, and only speakers belonging to the monitor system have good sound separation, and you can feel a different flavor from ARDEN etc. It is large enough to make a pleasant sound for domestic houses. It has been cleaned up due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2026.5.26 Maintained (exterior repair/polishing/oil finish rear baffle/hakama repair/painting unit maintenance: magnetic circuit gap cleaning/center adjustment for both low and high frequencies
Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning unit assembly, saran badge cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type, coaxial type (3149), frequency characteristics, 50 Hz to 20 kHz, impedance 8 ohms (5.5 ohms minimum), crossover frequency 1.4 kHz, W446 x H850 x D279 mm, 30 kg
The disposal price has been reduced! (Member prices are not applicable) 2026/5/14 sales price 1,280,000 yen Full maintenance was completed in 2024/12 after spending plenty of time on the unit, network, and exterior! This is an AUTOGRAPH with an HPD385 mounted in a genuine TEAC box. I am overwhelmed by the majestic sense of scale and profound and vivid sound image expressed by the low range backroad horn and the mid to low range front short horn, and it also has a good supple and beautiful tone that cannot be obtained with TANNOY in recent years. The exterior is in a state where there is a slight feeling of use over time, but it is generally beautiful depending on maintenance (Yamato Yuki)
Maintenance information: 2026.4.18 caster installation 2024.12.15 maintained (exterior repair/polishing/clear finish, front and rear baffle repair/paint maintenance: net cleaning/repasting, fraying repair/frame repair. Unit maintenance: low pass side edge exchange, magnetic circuit gap cleaning center adjustment, fastener polishing, high frequency side magnetic circuit gap cleaning center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, 4-pin terminal/terminal cleaning)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type usage unit, 15 inch (38 cm), HPD385 impedance 8 ohms, W1070 x H1530 x D660 mm, 78 kg/book
The price has been drastically reduced! 2026/5/23 sales price 158,000 yen Maintained! The richness of the sound is an attractive speaker. It is a well-balanced sound, and in addition to a sense of density in the mid-range, it is characterized by a relaxed sound. The sound quality is glossy and soft to the ear, and the sound of a stringed instrument is expressed very naturally. There is some peeling of the veneer on the exterior. Saran Net is my own work. Serial 2724A/2724B (Tamura Eiji)
Maintenance information: 2026.5.23 Maintained (tweeter disassembly, porcelain circuit slit maintenance. Silk dome coat deteriorated,. After cleaning, a dome coat was carried out. Put in a sine wave and check that there is no clattering noise.)
Accessories: Saran net (self-made)
Main specifications: 2 way bass reflex, 2 way 2 speaker, 8 ohm, sound pressure level 87 dB, W325 x H637 x D302 mm, 13 kg
The disposal price has been reduced. Member prices are not applicable. 2026/4/9 sales price 498,000 yen Both inside and outside have been fully maintained and brushed up! This is an original 4502 enclosure. The sense of energy that comes close in front of you, and the dynamic, and dynamic sound quality is truly JBL. You can enjoy lots of dynamic sounds. It has been beautifully finished with exterior maintenance (Sasaki Shota)
Maintenance information: 2026.4.9 Maintained (exterior repair/full painting, back surface plate created. Saran net replacement/frame repair. Woofer cone paper paint. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Network maintenance: frequency characteristics check, ATT cleaning, main unit cleaning)
Accessories: none
Main specifications: Unit configuration 2215B, 2420+2307, 3110 crossover 800 Hz W610 x H770 x D520 mm, weight approx. 40 kg/book
Famous machines are back! Thorough maintenance was carried out from the exterior to the interior, such as exchanging terminals. In addition to the sound quality, we are also concerned about the appearance, from the feel of the knobs, the texture of the wood grain, to the frame and screws. It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. It's been half a century since it went on sale, but the brillium diaphragm unit and precise cabinet, which have become rare in modern times, far from being comparable to other current speakers, stand out even more (Oikawa Tetsuji)
Maintenance information: 2026.4.27 Maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network maintenance: frequency characteristic check/ATT cleaning/terminal replacement, unit detachment)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 40 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 8 ohms output sound pressure level 90 dB dimensions W375 x H675 x D326 mm weight 31 kg/bottle
High quality sound switching hub designed specifically for network audio. It is a configuration that sets it apart from general-purpose hubs, such as a low noise power supply and SFP optical connection support. Equipped with an OCXO clock, there are plenty of functions for advanced users, such as external clock input support. It is recommended for those who want to boost the network playback environment in earnest. There are scuffs on the side of the exterior (Wang Zhan)
Maintenance information: 2026.5.24 Operation confirmed (SFP test OK. LAN OK. 10M clock OK)
Accessories: instruction manual, power cable, original box
Main specifications: 6-port audio-grade gigabit switch, 4 x RJ45 gigabit LAN, 1 x isolated RJ45 port, 1 x SFP optical port, OCXO (thermostatic chamber controlled crystal oscillator), external 10MHz master clock input (BNC), W240 x H50 x D175 mm, approx. 2.05 kg
1 unit only. Currently sold. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.22 Operation confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W W114 × H89 × D 92 mm 680 g
*Originally a set of 4, but only 3 pieces are sold. Set of 3 record player insulators It is a popular item that can be adjusted in height. It suppresses vibration and prevents unnecessary resonance. The exterior condition has a slight feeling of use such as dull stains over time (Yamato Yuki)
Accessories: mounting screws
Main specifications: working load range 2.8 to 8 kg (per piece) height adjustment range 20 mm diameter 57 mm height 52 mm
Everything from the exterior to the unit, network, and attenuator has been fully maintained. Tannoy's Impulse12! It also produces strong mid and low frequencies, so it is recommended not only for classical music, but also for those who listen to jazz and rock. The exterior is beautifully finished with exterior maintenance (Kobayashi Hitoshi)
Maintenance information: 2026.5.22 maintained (exterior repair/polishing/coating unit maintenance: magnetic circuit gap cleaning for both low and high frequencies, center network maintenance: frequency characteristics check/ATT cleaning)
Accessories: saran net
Main specifications: full range 30 cm coaxial type (3149) impedance 8 ohm output sound pressure level 92 dB playback frequency band 49 Hz to 20 kHz crossover frequency 1.2 kHz size W410 x H624 x D282 mm weight 22.0 kg
While taking over the new woofer installation of the 4312SE, the 70th anniversary limited model of the 4312 series and the full-scale 3-way network, etc., the technical elements of the L100 CLASSIC were introduced. The freshness of female vocals and the sense of scale of the orchestra can be heard richly, and the playback source genre is not selected. As for the exterior, there are some threads on the top plate and back. Serial TR0095-DL0005732/TR0095-DL0005737 (Otani Ryushin)
Maintenance information: 2026.5.22 sound output confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker front bass reflex type output sound pressure level 90dB impedance 6Ω playback frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
A network audio player/USB-DAC that gathers the best of Denon's Hi-Fi audio technology, such as Advanced AL32 Processing Plus and DAC master clocks. Network playback is compatible with 5.6 MHz DSD and 192 kHz/24 bit PCM. The USB-DAC section can also play 11.2 MHz DSD and 384 kHz/32 bit PCM. Serial 6021500317 (Fujisawa Yukishi)
Maintenance information: 2026.5.23 Operation confirmed
Accessories: remote control, power cord, antenna
Main specifications: DSD/2 channels, playback frequency range 2 Hz to 100 kHz, playback frequency characteristics 2 Hz to 50 kHz (-3 dB) PCM/2 channels, playback frequency range 2 Hz to 96 kHz, playback frequency characteristics 2 Hz to 96 kHz (sampling frequency 192 kHz), 2 Hz to 20 kHz (sampling frequency 44.1 kHz) digital audio input terminal USB-A input (front) x 1, USB-B input x 1, coaxial digital input x 1 , optical digital input x 2, analog audio output terminal, unbalanced output x 1, headphone output x 1, digital audio output terminal, coaxial digital output x 1, dimensions W434 x H198 x D377 mm, weight 11.7 kg
The price has been drastically reduced! 2026/4/10 sales price 238,000 yen Maintenance has been completed from exterior repairs to new attenuator replacement! A small monitor speaker developed as a new JBL using DVD and SACD as sources. The mid is equipped with a 904 Ti1 titanium dome, which improves clarity in the midrange range and dramatically expands the power range in the mid to high range. Matching with current typed sounds and digitally processed DVDs etc. is also excellent (Asaine Tomoho)
Maintenance information: 2026.4.10 Maintained (exterior cleaning/repair
Network maintenance (ATT replacement with new product, frequency characteristic check, terminal/contact cleaning) unit detachment)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex 93dB 6Ω W362 x H597 x D299 mm 20.0 kg
Picked up by the manufacturer and maintained, including remote control replacement! A flagship aircraft equipped with the “VRDS-NEO” transport mechanism “VMK-3.5-20S”. The high degree of perfection is one of the best in the series, and it is an excellent transport for monitor-oriented audiophiles with high resolution, freshness, and clear contours. As for the exterior, there is a scratch on the top plate. Serial 10006 (Fujisawa Yukishi)
Maintenance information: 2026.5.21 TEAC headquarters have been maintained (mechanical parts including laser pickup ASSY, and remote controls have been replaced. Mechanical ASSY disassembly/cleaning/lubrication clamper mechanism partial disassembly/rework correction. Solder and fix each connector part. (Inspection of each part, electrical adjustment, check, operation check, and cleaning.)
Accessories: remote control, power cord
Main specifications: SACD transport digital output/XLR x 2, coaxial x 1, iLINK 4p/6p x 1 word sink/BNC x 2 word clock frequency/4.1 kHz, 88.2 kHz, 176.4 kHz, 10 MHz, 22.5792 MHz W445 x H162 x D438 mm 31 kg
The disposal price has been reduced. Member prices are not applicable. 2026/5/5 sales price 1,380,000 yen The unit has been refreshed with internal and external maintenance including edge replacement and overhaul! A system equivalent to Westminster's modifications. Improvements have been made, such as adopting internal wiring with less transmission distortion and replacing the level control part with gold-plated parts. It has an overwhelming presence, and it is a famous machine that plays high-quality playback sound from an elegant design that looks like a work of art. The exterior has also been beautifully finished due to maintenance (Oikawa Tetsuji)
Maintenance information: 2026.5.5 maintained (exterior repair/polishing/oil finish, saran net cleaning/repasting, frame repair
Unit maintenance: low band edge exchange/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning/center adjustment network maintenance: frequency characteristic check/ATT part contact cleaning, faston terminal cleaning unit detachment)
Accessories: key, instruction manual
Main specifications: compound horn type enclosure+dual concentric unit (3839W) W1030×H1300 ×D631mm 115kg/bottle
Full maintenance from the exterior to the unit, from the network to the attenuator! A hidden masterpiece model that inherits the sound quality of ARDEN and BERKELEY, and is relatively small and the same size as the current Sterling. The relaxed, glossy tone unique to Tannoy is attractive. It is a model that not only classical fans but also those who listen to various genres can enjoy (Kobayashi Hitoshi)
Maintenance information: 2026.5.20 Maintained (exterior repair/polishing/oil finish baffle cleaning/paint saran net replacement unit maintenance: low frequency side edge replacement/magnetic circuit rust removal/gap cleaning/center adjustment, fastener polishing, high frequency side magnetic circuit rust removal/gap cleaning/center adjustment network maintenance: frequency characteristic check/ATT cleaning/4 pin terminal/terminal cleaning)
Accessories: saran net
Main specifications: 2-way, 1 speaker, bass reflex system, floor type, 31.5cm coaxial type (HPD315), allowable input, 60 W, impedance, 8 ohms, playback frequency band, 40 Hz to 20 kHz, output sound pressure level, 89dB, crossover frequency, 1 kHz, W450 x H850 x D260 mm, 25 kg
Full maintenance from unit maintenance such as magnetic circuit cleaning, center adjustment, etc., to saran net replacement, exterior repairs, etc.! A small speaker equipped with a 10-inch unit HPD295A with a form that looks like an ARDEN has been made smaller as it is. The good localization unique to coaxial is suitable for auditions at close range, and it sounds more than its size. Serial 208586/207791 (Takasaki Atsushi)
Maintenance information: 2026.5.19 Maintained (exterior repair/polishing/oil finish. Front baffle cleaning, rear baffle repair/painting. Saran net replacement. Unit maintenance: magnetic circuit rust removal/gap cleaning/center adjustment on both low range side and high range side
Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, 4-pin terminal cleaning, terminal cleaning)
Accessories: saran net
Main specifications: 2 way 1 speaker bass reflex system bookshelf type unit HPD295A (29.5 cm coaxial Alnico) rubber edge bass reflex type frequency band 50 Hz to 20 kHz efficiency 87.5 dB impedance 8 ohms allowable input 50 W 350 x H524 x D250 mm 18 kg/book
The disposal price has been reduced! (Member prices are not applicable) 2025/12/16 sales price 1,180,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled! Officially imported by TEAC. Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid to low range. Serial 001568/001574 (Yonejima Satoshi)
Maintenance information: 2025.12.16 Maintained (unit maintenance: low range side edge softening treatment/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning center adjustment. Network maintenance: frequency characteristics check, ATT cleaning, faston terminal replacement, terminal cleaning. Exterior cleaning/simple repairs. (Saran net cleaning/repasting, frame repair)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
Famous machines are back! Thorough maintenance was carried out from the exterior to the interior, such as cabinet polishing, repainting, unit maintenance, attenuator cleaning, and terminal replacement. In addition to the sound quality, we are also concerned about the appearance, from the feel of the knobs, the texture of the wood grain, to the frame and screws. It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The bright sound and high quality of the beryllium diaphragm unit, which have become rare in modern times, and the high quality shine through (Eternity Miraito)
Maintenance information: 2026.5.7 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network maintenance: frequency characteristic check/ATT cleaning/terminal replacement, unit detachment)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 40 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 8 ohms output sound pressure level 90 dB dimensions W375 x H675 x D326 mm weight 31 kg/bottle
The disposal price has been reduced. Member discounts are not applicable. 2026/4/9 sales price 1,280,000 yen Full maintenance from the exterior to the unit, attenuator, and network! This is an AUTOGRAPH with an HPD385 mounted in a genuine TEAC box. I am overwhelmed by the majestic sense of scale and profound and vivid sound image expressed by the low range backroad horn and the mid to low range front short horn, and it also has a good supple and beautiful tone that cannot be obtained with TANNOY in recent years. The letters have disappeared on the attenuator (Murakoshi Yoichi)
Maintenance information: 2026.2.25 maintained (exterior repair/cleaning, rear baffle repair/polishing/painting, saran net cleaning/repasting, fraying repair, unit maintenance: low frequency side edge replacement, magnetic circuit gap cleaning/center adjustment, fastener polishing, high range side: magnetic circuit gap cleaning/center adjustment, network maintenance: frequency characteristic check/ATT cleaning, terminal cleaning, 4 Pin terminal cleaning)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type usage unit, 15 inch (38 cm), HPD385 impedance 8 ohms, W1070 x H1530 x D660 mm, 78 kg
Famous machines are back! Thorough maintenance was carried out from the exterior to the interior, such as cabinet polishing, repainting, unit maintenance, attenuator cleaning, and terminal replacement. In addition to the sound quality, we are also concerned about the appearance, from the feel of the knobs, the texture of the wood grain, to the frame and screws. It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The bright sound and high quality of the beryllium diaphragm unit and precise cabinet, which have become rare in modern times, shine through (Oikawa Tetsuji)
Maintenance information: 2026.5.16 Maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network maintenance: frequency characteristic check/ATT cleaning/terminal replacement, unit detachment)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 40 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 8 ohms output sound pressure level 90 dB dimensions W375 x H675 x D326 mm weight 31 kg/bottle
Refresh everything from the exterior to the washing and cleaning of the attenuator! Very luxurious finish with walnut finish enclosure, lattice net, green front baffle. It makes the saxophone drier and makes the vocals more realistic. It has good localization unique to coaxial, and it demonstrates its ability in all genres (Eternity Miraito)
Maintenance information: 2026.5.15 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint lattice repair/polishing/painting, backside fabric replacement unit maintenance: high frequency side magnetic circuit gap cleaning/center adjustment, terminal cleaning network maintenance: frequency characteristic check/ATT/switching SW cleaning, faston terminal replacement, terminal cleaning)
Accessories: none
Main specifications: 604-8ks/38cm coaxial 2-way playback frequency band 20-20kHz impedance 8Ω W698 x H755 x D498 mm weight approx. 52 kg/unit
The disposal price has been reduced. Member prices are not applicable. 2026/4/4 sales price 39,800 yen ※Currently sold. Yamamoto Acoustics network for ALTEC 604 (8 ohms). Specifications are unknown (Oikawa Tetsuji)
Maintenance information: 2026.4.4 operation confirmed
Accessories: instruction manual
Main specifications: network dimensions H160xH150xD100mm for ALTEC 604 (8Ω) weight 3.3 kg/1 piece
Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full mid- to high-pitched sound are attractive for some input (Hiura Katsuji)
Maintenance information: 2026.5.15 maintained (vibration plate installation adjustment, pad dampener deterioration mounting screws, rust replacement, insulation bushing, deterioration replacement, vibrating plate dirt cleaning.)
Accessories: screws
Main specifications: 1 inch driver 500 to 20,000 Hz 8 ohms W145 x D97 mm 5.1 kg
Maintenance has been completed, such as cleaning the attenuator and replacing the insulation bushing. Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high voltage resistant non-polar capacitors and coils using low loss Orient Cores, and is a network that is easy to use with 500 Hz crosses and is very easy to use for those who are assembled with 175 or 375 drivers (Oikawa Tetsuji)
Maintenance information: 2026.4.5 maintained (attenuator SW contact cleaning, insulating bushing, screw rust replacement, ultrasonic terminal cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! A type with few exhibits! Crossover 800 Hz network. It is a rare item that is essential for 2-way systems. Serial 16932, 17134 (Murakoshi Yoichi)
Maintenance information: 2026.5.13 maintained (terminal mounting screw rust and insulation bushing replacement, attenuator SW contact cleaning, crossover check)
Accessories: none
Main specifications: Impedance: 8 ohms low range/16 ohm treble range, 800 Hz, high frequency boost, 3-step switching
Both the interior and exterior have been fully restored! In addition to exterior repairs, this is the second generation of Tannoy's famous ARDEN, which was completely restored by disassembling the speaker unit and network. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The finish is beautiful due to exterior maintenance (Ryo Mizusaki)
Maintenance information: 2026.5.5 Maintained (exterior repair/polishing/painting)
Front and rear baffle repair/painting, saran net replacement/frame repair, unit maintenance: low frequency side edge replacement/magnetic circuit rust removal/gap cleaning/center adjustment, high frequency side magnetic circuit rust removal/gap cleaning/center adjustment, network maintenance: frequency characteristic check/ATT cleaning/fast terminal replacement, terminal cleaning, unit detachment)
Accessories: none
Main specifications: 2 way 1 speaker front bass reflex 38cm coaxial unit 8Ω 92dB crossover frequency 1kHz W660 × H990 × D370 mm 43 kg/book
※Since the age is different on the left and right, it is cheap. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. On the exterior, there is rust on the terminal part. (TAMURA Eiji)
Maintenance information: 2026.5.4 sound output confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
Exterior maintenance and internal unit overhauled! A coaxial 2-way speaker incorporating Tannnoy's 38cm unit. Compared to the company's large speakers equipped with 38cm coaxial units, this enclosure is a compact size. It is a speaker with a smooth low frequency with plenty of volume (Daiki Goto)
Maintenance information: 2026.4.17 Maintained (exterior repair/polishing/clear painting)
Front and rear baffles/hakama repair/painting Saran net replacement/frame repair. Condition check and dispersion. Unit maintenance: low band edge replacement/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning/center adjustment
Network maintenance: frequency characteristics check, ATT cleaning, terminal cleaning/faston terminal replacement. (Detachable unit)
Accessories: none
Main specifications: Bass reflex floor-type unit 38cm coaxial 2-way (3828) frequency characteristics 35 Hz to 20,000 Hz impedance 8 ohms output sound pressure level 91.5 dB crossover frequency 1 kHz (12 dB/oct) W540 x H840 x D310 mm approx. 34 kg
Maintained! The front paint peels off a lot, so it's cheap. A rare 800 Hz/8 ohm network that doesn't arrive easily. For those who are self-made and use LE175 or LE85. You can enjoy a horn sound that is a bit different from 500Hz. There are paint peeling, line scratches, rust spots, etc. on the exterior. Serial 6218/6226 (Eternity Miraito)
Maintenance information: 2026.4.16 maintenance completed (input terminal deterioration replacement, ultrasonic terminal cleaning, insulation bushing mounting screw rust replacement, attenuator switch contact cleaning, crossover check OK)
Accessories: none
Main specifications: impedance 8 ohms, crossover, 800 Hz, 120 W, 3-stage gain control, approx. 1.9 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. It is in good condition for its model year. Serial 30627, 31069 (Fujisawa Yukishi)
Maintenance information: 2026.4.5 maintained (attenuator SW contact cleaning, insulation bushing deterioration replacement terminal ultrasonic cleaning
Screw rust replacement and crossover check OK)
Accessories: No accessories
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg