Pioneer ribbon tweeters are still popular over 40 years after their release. A lightweight and highly rigid beryllium diaphragm and Alnico magnet are used. The high-quality tone won't fade even today. There are scratches on the grill, and there are dents on the front on one side (Daiki Goto)
Maintenance information: 2026.5.6 operation confirmed
Accessories: stand
Main specifications: ribbon tweeter with fuse protection circuit, playback frequency 5,000 Hz to 120,000 Hz 8 ohms sound pressure 97.5 dB maximum input 100 W rated input 50 W (both 5 kHz to -12 dB/when using an OCT network) W134 x H89 x D179 mm 2.6 kg
Comes with a stand. It is a speaker that was originally upgraded to a high sound quality 5.1 channel system, but it is quite capable even on its own. The 3-way structure of the coaxial mid-high range and woofer makes positioning very good. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.19 Operation confirmed
Accessories: saran net, jumper, spike holder, stand
Main specifications: 3-way impedance 6 ohms playback frequency band 40 Hz to 50 kHz sound pressure 88 dB maximum input 160 Hz crossover 420 Hz, 3.2 kHz main unit W230 x H427 x D298 mm 15 kg stand W390 x H270 x D340 mm 6.5 kg
This is a PC-3MC replacement needle used in Pioneer PL-570 players, etc. (TAMURA Eiji)
Maintenance information: 2026.5.6 Operation has not been confirmed since there is no PC-3MC. The stylus cantilever is fine.
Accessories: case
Main specifications: MC type frequency characteristics 10 Hz to 32 kHz load resistance 30 kΩ to 100 kΩ suitable needle pressure 2 g ± 0.3 g
This is a PC-3MC replacement needle used in Pioneer PL-570 players, etc. (TAMURA Eiji)
Maintenance information: 2026.5.6 Operation has not been confirmed since there is no PC-3MC. The stylus cantilever is fine.
Accessories: case
Main specifications: MC type frequency characteristics 10 Hz to 32 kHz load resistance 30 kΩ to 100 kΩ suitable needle pressure 2 g ± 0.3 g
Limited model limited to 2700 units. It is a CD player equipped with a turntable mechanism full of originality. There is only the flagship model from the time, which was also praised by Tetsuo Nagaoka, and it has a wide range, smooth, and glossy sound. It has a wonderful degree of perfection, such as the expressive power of the atmosphere of the sauce. You can see a feeling of use on the exterior, dullness, stains, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.4 operation confirmed
Accessories: remote control, turntable seat (with case)
Main specifications: Hi-Bit Legato Link Conversion S equipped with a CD turntable system, SNR of 115 dB or more, dynamic range of 100 dB or more, W440 x H140 x D341 mm, 12.6 kg
*Currently sold. A speaker equipped with a ribbon tweeter that Pioneer is proud of. It has been developed for surround sound, but it has a high resolution and a sense of realism, and since it reproduces vivid sound, it can also be used enough for high fidelity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net, jumper
Main specifications: phase inversion, tall boy, floor type, anti-magnetic design, 3 way+super tweeter system, 6 ohms, frequency characteristics, 32 Hz to 120 kHz, 90 dB, 160 W, W230 x H1000 x D338 mm, 30.2 kg
*Remote control is missing. Cost-effective SACD player. Equipped with a front USB terminal, it is also possible to play back MP3/WMA sound source files. The spacious, transparent sound quality allows you to relax and enjoy music. Small scratches and a feeling of use can be seen. Serial OLKD007578JP (Fujisawa Yukishi)
Maintenance information: 2026.5.5 operation confirmed
Accessories: power cord
Main specifications: CD/SACD compatible with USB terminal, W435 x H128 x D329 mm 5.2 kg
*Currently sold. Pioneer large subwoofer. You can expect powerful and heavy low frequencies coming out of the 30cm woofer. It is recommended for those who have a combination with the Pioneer S series or large systems. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.19 Operation confirmed
Accessories: saran net
Main specifications: W435 × H532 × D465 mm 32 kg
An attractive premain amplifier with a straightforward sound like a pioneer. It has a natural balance without excessive seasoning, and the vocals come forward cleanly with good visibility in the mid-range. The exterior is dull and there is a feeling of use such as scratches on the top plate. Serial QA1002911DM (Tomoho Asaine)
Maintenance information: 2026.4.21 sound output confirmed
Accessories: none
Main specifications: W420 × H110 × D310 mm 5.8 kg
The tone is delicate and clear. Since it is affordable, this cartridge is recommended for those who are new to analog. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.4.28 Operation confirmed
Accessories: none
Main specifications: MM type 3 mV proper needle pressure 1.5 g dead weight 6.4 g
Pioneer MM Cartridges. It uses an aluminum light alloy pipe cantilever, and the impression is that the range is relatively wide for its age. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.4.28 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 3.5 mV optimal needle pressure 2.2 g load resistance 30 to 100 kΩ playback frequency band 15 to 25,000 Hz needle tip 0.5 mil joint type diamond dead weight 5.7 g
Pioneer MM Cartridges It uses an aluminum light alloy pipe cantilever, and the impression is that the range is relatively wide for its age. The exterior is dull and has a feeling of use (Yamato Yuki)
Maintenance information: 2026.4.22 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.5 mV optimal needle pressure 2.2 g load resistance 30 to 100 kΩ playback frequency band 15 to 25,000 Hz needle tip 0.5 mil joint type diamond dead weight 5.7 g
The tone is delicate and clear. Since it is affordable, this cartridge is recommended for those who are new to analog. The exterior is dull and dirty (Takahashi Nobuyuki)
Maintenance information: 2026.4.21 operation confirmed
Accessories: none
Main specifications: MM type 3 mV proper needle pressure 1.5 g dead weight 6.4 g
Pioneer MM Cartridge PC-110. It feels like the range is quite wide for the age group. Since it is lightweight and easy to match with various tone arms, it is also recommended for straight arms, etc. The exterior has a feeling of use such as dullness (Takahashi Nobuyuki)
Maintenance information: 2026.4.17 operation confirmed
Accessories: none
Main specifications: Power generation method mm type output voltage 3.5 mV 5 cm/sec needle pressure 1.8 to 2.5 g (optimal 2.2 g) playback frequency band 15-25,000 Hz± 3 dB dead weight 5.7 g
Pioneer MM Cartridge PC-110. It feels like the range is quite wide for the age group. Since it is lightweight and easy to match with various tone arms, it is also recommended for straight arms, etc. The exterior has a feeling of use such as dullness (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.16 sound output confirmed
Accessories: none
Main specifications: Power generation method mm type output voltage 3.5 mV 5 cm/sec needle pressure 1.8 to 2.5 g (optimal 2.2 g) playback frequency band 15-25,000 Hz± 3 dB dead weight 5.7 g
This is a genuine Pioneer mm cartridge. It creates a thick, powerful sound. The exterior has a feeling of use such as dullness and dirt on the body (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.16 sound output confirmed
Accessories: none
Main specifications: mm type frequency characteristics 10 Hz to 23000 Hz output voltage 3.5 mV suitable needle pressure 1.7 to 2.3 g dead weight 6.7 g
Unspecified black shell for PIONEER. I think it's made of plastic. The exterior has dullness etc. (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.7 continuity confirmed
Accessories: none
Main specifications: 10 g dead weight
Pioneer MM Cartridge PC-110. It feels like the range is quite wide for the age group. Since it is lightweight and easy to match with various tone arms, it is also recommended for straight arms, etc. The exterior has a feeling of use such as dullness (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.2 sound output confirmed
Accessories: none
Main specifications: Power generation method mm type output voltage 3.5 mV 5 cm/sec needle pressure 1.8 to 2.5 g (optimal 2.2 g) playback frequency band 15-25,000 Hz± 3 dB dead weight 5.7 g
An easy-to-use headshell in Pioneer's basic style. The exterior has a feeling of use such as dullness and small scratches (Matsumoto Tsuyoshi)
Maintenance information: 2026.4.2 continuity confirmed
Accessories: none
Main specifications: dead weight 6 g
※There is no operation problem, but it is sold as is. It is a single-unit model of the S-ST05, and was sold as a center for surround playback with the S-ST05. Be sure to build a compact surround system. There is a feeling of use on the exterior, such as threads and dullness (Mizusaki Ryo)
Maintenance information: 2026.4.1 sound output confirmed
Accessories: original box, bracket
Main specifications: impedance 8 ohms, W230 x H140 x D 163 mm, weight 2.8 kg
This headshell has a basic style and is easy to use. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2026.3.17 continuity confirmed
Pioneer carbon fiber molded headshell Simple and easy to use design. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2026.3.14 continuity confirmed
Accessories: none
Main specifications: carbon fiber molding dead weight 9.5 g
Pioneer PP-303 silver model. It is a headshell made with full consideration for acoustic characteristics. The exterior is dull and dirty, and the company name logo is about to disappear (Takahashi Nobuyuki)
Maintenance information: 2026.3.11 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7.0 g
This is a basic style headshell with short fingers. It's also easy to use. The exterior has a feeling of use such as dullness (Matsumoto Tsuyoshi)
Maintenance information: 2026.1.15 continuity confirmed
Accessories: none
Main specifications: dead weight 9 g
The tone is delicate and clear. Since it is affordable, this cartridge is recommended for those who are new to analog. The exterior is dull and dirty (Ryuichiro Kaneko)
Maintenance information: 2026.3.8 operation confirmed
Accessories: none
Main specifications: MM type 3 mV proper needle pressure 1.5 g dead weight 6.4 g
Pioneer lightweight shell. It is built with full consideration for acoustic characteristics. The exterior is dull and has a feeling of use (Ryuichiro Kaneko)
Maintenance information: 2026.3.8 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7g
Pioneer lightweight shell. It is built with full consideration for acoustic characteristics. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.3.7 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7g
MM type cartridge with improved characteristics by implementing a lightweight vibration meter. Light alloy pipe cantilevers and titanium-based diamonds are used to achieve light and firm sound quality. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.3.3 sound output confirmed
Accessories: none
Main specifications: MM type 3 mV needle pressure 1.4 to 2.0 g (optimal 1.7 g) load resistance 30 to 100 kΩ output impedance 2 kΩ dead weight 5.1 g
MM type cartridge with improved characteristics by implementing a lightweight vibration meter. Light alloy pipe cantilevers and titanium-based diamonds are used to achieve light and firm sound quality. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.3.3 sound output confirmed
Accessories: none
Main specifications: MM type 3 mV needle pressure 1.4 to 2.0 g (optimal 1.7 g) load resistance 30 to 100 kΩ output impedance 2 kΩ dead weight 5.1 g
Pioneer lightweight shell It is built with full consideration for acoustic characteristics. The exterior is dull (Mizusaki Ryo)
Maintenance information: 2026.3.3 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7g