There is no print from an American double gettering triode sold per bottle, but it is thought that it is made by GE due to the structure. Measured value 66 (rejected value 58) There is a defect in part of the mica support with replacement box, and it makes a crackling sound within the base ※The measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The disposal price has been reduced. Member prices are not applicable. 2025/11/8 sales price 1,180,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled! Officially imported by TEAC. Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid to low range (Oikawa Tetsuji)
Maintenance information: 2025.11.8 Maintained (exterior repair/polishing/painting. Front and rear baffle repair and painting. Saran net cleaning/repasting, frame repair. Unit maintenance: low pass side edge softening treatment/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, one-sided defective resistor replacement, terminal cleaning unit detachment)
Accessories: none
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
The E-250 was completely remodeled based on the E-213. It is a premain amplifier that has a lot of information and can be used in any genre. The resolution is even better than the previous model, and I have the impression that transparency has increased (Hiura Katsuji)
Maintenance information: 2026.2.5 sound output confirmed
Accessories: instruction manual, remote control, power cable, original box
Main specifications: AAVA2 system with volume control, effective output 90W+90W (8Ω) W465 x H150 x D420 mm 19.9 kg
The disposal price has been reduced! (Member prices are not applicable) 2026/1/15 sales price 59,800 yen ※The phono cable has XLR specifications. Includes base for THORENS TD-124 Grad's rare wooden tonearm, which received rave reviews in stereo sound magazines, is now in stock. The beautiful curves and sleek design of the gunstock type walnut are excellent, and it is an arm that is the cornerstone of the Fifty's Sound. (FUJISAWA KOSHI)
Maintenance information: 2026.1.10 continuity confirmed
Accessories: phono cable, arm board
Main Specifications: Type: Static Balance Type Tone Arm Material Gunstock Walnut Solid Wood Arm Length 11 1/4 inch Mounting Radius 8 1/16 inch Overhang Approx. 3/8 inch Tracking Error ± 0.5 degrees or less Needle Pressure Adjustment Range 0 to 5g Suitable Needle Pressure 0.5 to 3 g Horizontal Bearing Low Friction Ball Bearing Vertical Bearing Knife Edge System No Anti-skating Mechanism Internal Wiring Single Wire Shield Cable headshell non-replaceable integrated structure
Maintained! It is a popular model with a full range of cartridges that can be used. In addition to the glossy, smooth tone due to the metal knife edge, it is a famous machine that boasts deep chiseled sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.1.31 maintenance completed (cleaning, elastic coupling replacement, adjustment base plate, rubber grommet replacement, 1/16 inch hex wrench added, assembly, adjustment, output cable, new production, continuity check)
Accessories: instruction manual, copy of instruction manual, connection cable
Main specifications: statically balanced needle pressure 0 to 5 g, cartridge weight 1.5 to 26 g
Maintenance was completed in 2025/5, including disassembly contact polishing for lever switches and volume components! Lux's early transistor pre-main amplifier. The vocals stand out based on a faint warm sound, and you can feel the thickness of the mid-range. In addition to classical music, it is strong against old sound sources, and has an appeal not found in current models. The exterior has small scratches, dullness, etc. Serial 119957P (Jun Tamai)
Maintenance information: 2025.12.20 sound output confirmed
2025.5.13 Maintained (switch, volume, disassembly, contact polishing, input/output pin jack polish, power supply circuit and tone control circuit, deteriorated transistor replacement, electric circuit, DC adjustment, idling current adjustment)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (8Ω) PhonO2 system frequency band 5 to 50,000 Hz W451 x H148 x D268 mm 10.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/12/16 sales price 1,180,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled! Officially imported by TEAC. Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid to low range. Serial 001568/001574 (Yonejima Satoshi)
Maintenance information: 2025.12.16 Maintained (unit maintenance: low range side edge softening treatment/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning center adjustment. Network maintenance: frequency characteristics check, ATT cleaning, faston terminal replacement, terminal cleaning. Exterior cleaning/simple repairs. Saran net cleaning/repasting, frame repair)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
Maintenance completed in August 2020. Internal and external maintenance has been completed, such as replacing a coupling condenser with an oil condenser, replacing a banana-compatible SP terminal, and replacing a vacuum tube (50CA10)! This model is based on the concept of making sounds even more straightforward than the MQ60. The warmth of the tone and the indescribable luster sound are truly lackstones. You can see the exterior, dullness, scuff marks, paint peeling, etc. (Kobayashi Hitoshi)
Maintenance information: 2020.8.25 maintained (50CA10 x 3, 12BH7 x 1, coupling capacitor, electrolytic capacitor, rectifier diode, semi-fixed resistor, RCA terminal, SP terminal, MT tube socket, fuse replacement. Gain VOL, impedance switching SW disassembly contact refinement, oxidation and sulfidation prevention grease coating circuit readjusted, input/output waveform confirmed, rated output tested)
Accessories: none
Main specifications: used vacuum tube 50C-A10 x 4 12BH7A x 2 6267 x 1 EF86EH x 1 output 25+25W (4/8/16 ohm switch switching) speaker output 1 system W410 x H160 x D205 mm 13.8 kg
The price has been reduced. 2025/6/7 sales price 24,000 yen, unopened, set of 4 It is said to be for quadra spike racks. These are high sound quality legs that can be used in place of genuine legs from compatible racks. Ideal sound quality can be brought out when combined with EcoBrass Spike-Base (ASB-0104/ASB-0103) (permanent future)
Maintenance information: 2025.6.7 operation confirmed
Accessories: none
Main specifications: Compatible models QUADRASPIRE racks (compatible with Q4/Q4D series and QAVM glass shelf models)
screw hole diameter 12mm
Vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminal replacements, SW and VOL disassembly contact polishing, oxidation and sulfidation prevention grease coating, etc., have been refreshed and maintained. This model is based on the concept of making sounds even more straightforward than the MQ60. The warmth of the tone and the indescribable luster sound are truly lackstones. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.6.28 maintained (impedance switching SW/gain VOL disassembly contact polish, oxidation/sulfidation prevention grease application, input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 20W+20W confirmation) sound output test) 2025.6.26 maintained (vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, semi-fixed VR, fuse holder replacement. Load test (8Ω load 1kHz 20W+20W), input/output waveform confirmation, sound output check performed)
Accessories: none
Main specifications: used vacuum tube 50CA10 x 4 12BH7A x 2 6267 x 1 EF86EH x 1 output 25+25W (4/8/16 ohm switch switching) speaker output 1 system W410 x H160 x D205 mm 13.8 kg
※Shipping service. No. 188 Special Feature 1 = Thorough Audition of New Fall Models Exciting Components Expanded Edition (Magico = Q7, Sonus Faber = Olympic, OlympicalII, OlympicalIII, KISO Acoustic = HB-X1, MSB Technology = Analog DAC+Analog Power Base, TAD = TAD-D1000, TAD-DA1000, Denon = DCD-SX1, Yamaha = CD-S3000, A-S3000, Indigo = Indigo Line Amplifer, Indigo Mono Block Power Amplifer, Constellation Audio = Perseus, Audio Research = LS17SE, Reference75, VSI60) /Special Feature 2 = [Speaker] & [Amplifier] Class-specific compatibility check test/2013.9.2 issued. Since the photograph is a sample, the actual product may be broken or there may be markings etc.