Add search
23 results
Manufacture | Model/Title | Price | Arrival date

C3aJapan

Ask 24-42160-04905-00
C3a
Manufacture:Exclusive
Original price: JPY 380,000
Price: JPY 180,000
Japan 1978 made
Arrival: 2024-04-25 20:08:03
description
Maintained! An exclusive popular preamp. It is packed with attention to communication from engineers, such as the quadruple attenuator volume with 22 contacts and the use of copper foil glass epoxy substrates. Oxygen-free copper wire is used as internal wiring material. The abundance of inputs, such as 3 PHONO systems and 3 AUX systems, is also attractive. The high quality, which is thick and roomy, is attractive. There are scratches and scratches on the exterior. Serial 001000885 (Yonejima Satoshi) Maintenance information: 2024.4.25 Maintained (all lever switch disassembly contacts polished contact grease applied due to poor lever switch contact. Rotary switch contact cleaning. Check the operation of each input/output. (Capacitors have been maintained) Accessories: No accessories Main specifications: 22 contact attenuator PHONO 3 system TUNER 1 system AUX 3 TAPE system 3 stage switchable attenuator dimensions W468 x H206 x D342 mm weight 12.5 kg

4344U.S.A

24-42358-06488-00
4344
Manufacture:JBL
Original price: JPY 1,100,000
Price: JPY 634,545(pair)
U.S.A 1982 made
Arrival: 2024-04-20 20:01:45
description
Full maintenance from exterior to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Kobayashi Hitoshi) Maintenance information: 2024.4.19 maintenance (exterior (repair, polishing, oil finish, front and rear baffle repair, painting, saran net replacement, frame repair) woofer maintenance (edge replacement, cone paper coating) midmaintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit rust removal, center adjustment, sound-absorbing material replacement, terminal contact cleaning) tweeter maintenance (horn disassembly and cleaning, Magnetic circuit rust removal, gap cleaning, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal cleaning) defuser repair) Accessories: saran net diffuser Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg

RYG-1Japan

Ask 24-42610-08502-00
RYG-1
Manufacture:ACOUSTIC REVIVE
Original price: JPY 18,800
Price: JPY 9,091
Japan
Arrival: 2024-04-24 20:09:45
description
Y lug plug set of 4 have mirror-polished terminal contact parts made of leadless brass material with excellent conductivity, and rhodium plating treatment has been applied to the surface to further improve conductivity and durability (Tamura Eiji) Accessories: original box, instruction manual

6N-P4030/1.3mJapan

Ask 24-42565-08183-00
6N-P4030/1.3m
Manufacture:ACROLINK
Original price: JPY 13,000
Price: JPY 5,455
Japan
Arrival: 2024-04-24 20:06:14
description
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi) Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product) Accessories: none

FI-15Japan

This item has been sold.You can't purchase now. 24-42565-08293-00
FI-15
Manufacture:FURUTECH
Original price: JPY 5,690
Price: JPY 1,273 Sold Out
Japan
Arrival: 2024-04-23 20:09:13
description
PSE standard product UL compliant FURUTECH inlet plug is a non-magnetic material design using gold-plated copper screws and stainless steel parts (Kobayashi Hitoshi) Accessories: none
Rectangular York/Monitor GOLD15
Manufacture:TANNOY
Price: JPY 543,636(pair)
UK 1967 made
Shop: Osu shop
Arrival: 2024-04-04 19:57:34
description
The disposal price has been reduced. 2024/4/4 sales price 898,000 yen British original enclosure, equipped with 15 inch monitor gold! Refreshing York has regained its original tone through our refreshment maintenance. It is a speaker representing TANNOY that brings out the appeal of all kinds of sources. In particular, the beautiful, glossy sound in string and vocal music plays a sound that once you hear it, you won't be able to leave your ears (Sasaki Shota) Maintenance information: 2024.4.4 Maintained (exterior repair/polishing/clear finish. Maintenance: net cleaning/fraying repair/repasting, sound-absorbing material removal. Unit maintenance: Magnetic circuit gap cleaning center adjustment for both low and high frequencies. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning) Accessories: none Main specifications: bass reflex system floor type 15 inch coaxial 2 way (Monitor Gold 15 inch) frequency characteristics 30 Hz to 20,000 Hz crossover frequency 1,000 Hz maximum input 50 W impedance 8 ohms size W597 x H1,070 x D375 mm

SC-500WOODJapan

Ask 24-42117-04587-00
SC-500WOOD
Manufacture:ONKEN
Original price: JPY 80,000
Price: JPY 63,636(pair)
Japan
Arrival: 2024-03-01 20:01:07
description
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi) Accessories: none Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg

C50 OLYMPUS S8RU.S.A

Ask 24-42505-07571-00
C50 OLYMPUS S8R
Manufacture:JBL
Original price: JPY 1,176,000
Price: JPY 907,273(pair)
U.S.A 1967 made
Shop: Osu shop
Arrival: 2024-04-14 20:15:07
description
Refreshed during interior and exterior maintenance in July 2022! It is an S8R composed of late stage famous units representing JBL. The 075 tweeter is full of realism, with the sound of a driver blowing fire into the thick, dry low frequencies, and a sense of realism that leaves graininess. You can enjoy the real thrill of vintage audio. It is in good condition (Oikawa Tetsuji) Maintenance information: 2022.7.13 maintained (exterior repair/polishing/oil finish, front and rear baffle/hakama repair/paint, lattice repair/polishing/painting, backing fabric replacement, woofer maintenance (edge replacement, cone paper coating), passive cone paper coating, driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning), tweeter maintenance (horn polishing, magnetic circuit rust removal, etc.) Gap cleaning, terminal cleaning), network maintenance LX5 (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT (SW type) disassembly contact polishing and cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) N7000 (terminal and screw rust removal, acid cleaning, insulation bush replacement. ATT contact cleaning and contact grease application. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. input/output waveform and balance check, sound output check), unit detachable diffuser repair) Accessories: none Main specifications: 3 way 3 speakers 1 passive radiator system low range unit 38cm cone type LE15A, medium range unit horn type 375, high range unit 075, passive radiator 38cm cone type PR15, network LX5/N7000 sound pressure level 95dB allowable input 125W W1020 x H670 x D510 mm 82 kg/book

CDP-333ESAJapan

Ask 24-42493-07391-00
CDP-333ESA
Manufacture:SONY
Original price: JPY 60,000
Price: JPY 27,091
Japan 1991 made
Arrival: 2024-04-11 20:09:06
description
*Currently sold. Remote control is missing. A powerful machine with thick mid-range and enhanced musicality. We are currently putting in an unimaginable amount of material. It also works well with vintage speakers and amplifiers. There is a feeling of use such as dullness and scratches. Serial 204286 (Takasaki Atsushi) Maintenance information: 2024.4.10 sound output confirmed Accessories: copy of the manual Main specifications: 2 to 20 kHz W430 x H125 x D375 mm 12.0 kg

4343

Ask 24-42171-05029-00
4343
Manufacture:JBL
Original price: JPY 1,120,000
Price: JPY 634,545(pair)
Shop: Osu shop
Arrival: 2024-04-04 19:57:27
description
All units have been overhauled, including the woofer, mid, driver and tweeter, and network! It is an individual that has been fully restored, including the exterior. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Sasaki Shota) Maintenance information: 2024.4.4 Maintained (exterior repair/gray paint. Front and rear baffle repair and painting. Saran net replacement/frame repair. Woofer maintenance: edge replacement, corn paper coating. Midmaintenance: edge replacement, corn paper coating. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, switching SW contact cleaning, high frequency capacitor replacement) Accessories: none Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book

STRESS FREE DIGITAL-6N/0.6mJapan

Ask 24-42426-06830-00
STRESS FREE DIGITAL-6N/0.6m
Manufacture:SAEC
Price: JPY 3,636
Japan
Arrival: 2024-04-04 19:54:32
description
SAEC long-selling model with a 0.6 m digital cable. 6N ultra-high purity copper with excellent transmission characteristics is used as the conductor material, and transmission loss is reduced with accurate impedance matching (Tamura Eiji) Maintenance information: 2024.4.4 continuity confirmed Accessories: none

AT-LH15/OCCJapan

Ask 24-42371-06558-00
AT-LH15/OCC
Manufacture:audio-technica
Original price: JPY 8,200
Price: JPY 4,091
Japan
Arrival: 2024-03-30 19:59:04
description
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Tamura Eiji) Maintenance information: 2024.3.30 continuity confirmed Accessories: none Main specifications: aluminum 15g

Signature Genesis Silver Spiral/1.0mUK

Ask 24-42149-04784-00
Signature Genesis Silver Spiral/1.0m
Manufacture:QED
Price: JPY 20,727(pair)
UK
Arrival: 2024-03-06 20:13:42
description
The price has been reduced! 2024/3/6 sales price 25,000 yen speaker cable 1.0 m pair banana on both ends uses the company's highest-grade cable material. Recommended for those who want to improve the tightness of the low frequencies. On the exterior, there is a part where the rubber ring on the terminal is off. ※The cable is stiff, so please be careful when routing (Tamura Eiji) Maintenance information: 2024.3.6 continuity confirmed Accessories: No accessories

6N-S1040/0.8mJapan

Ask 24-42116-04565-00
6N-S1040/0.8m
Manufacture:ACROTEC
Original price: JPY 13,600
Price: JPY 4,091(pair)
Japan
Shop: Osu shop
Arrival: 2024-03-04 20:03:12
description
The 0.8 m pair end of the speaker cable uses a new polymer polyolefin material with an excellent low dielectric constant of about 1/4 compared to untreated PVC. Using a cab tire structure, you can hear a neutral sound that is strong against disturbance noise and has a sense of stability. There is rubbing dirt on the sheath (Kojima Yosuke) Accessories: none

T-150Japan

Ask 09-44371-20624-00
T-150
Manufacture:COMPLY
Original price: JPY 2,100
Price: JPY 455
Japan
Arrival: 2024-02-03 19:57:52
description
The disposal price has been reduced! (Member discounts are not applicable) 2024/2/3 sales price 1,000 yen unopened item! 3 sets of memory foam earphone tips The uniquely developed memory foam urethane material achieves ultimate sound insulation. A long-selling series developed for everyone who loves music, with a comfortable and highly secure fit. *Quality cannot be guaranteed due to long-term storage (Asaine Satoshi Law) Accessories: none

4530BKU.S.A

Ask 24-41845-02482-00
4530BK
Manufacture:JBL
Original price: JPY 156,000
Price: JPY 50,000(pair)
U.S.A
Shop: Osu shop
Arrival: 2024-02-13 19:51:18
description
※It has been repainted and is inexpensive because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo) Accessories: screws Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg

自作オーディオボード

Ask 22-34765-32058-00
自作オーディオボード
Manufacture:不明
Price: JPY 382
Arrival: 2024-01-04 19:55:51
description
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi) Accessories: none Main specifications: W460 x H40 x D350 mm 4.6 kg

不明コンセントプレートU.S.A

Ask 22-34135-27944-00
不明コンセントプレート
Manufacture:HUBBELL
Price: JPY 909
U.S.A
Arrival: 2024-01-11 20:06:58
description
HUBBEL's unspecified outlet plate. The material is similar to the P80W and NP8I, and it is ivory-colored. There is a scuff on the side (Murakoshi Yoichi) Accessories: screws

75-05Japan

Ask 23-39233-10146-00
75-05
Manufacture:NAGAOKA
Original price: JPY 2,000
Price: JPY 364
Japan
Arrival: 2023-08-21 19:25:40
description
The price has been reduced! 2023/8/21 Sales price 500 yen*There is deterioration due to long-term storage, so quality cannot be guaranteed. This is a replacement needle for Nagaoka and is compatible with SANYO's ST-G5. The cushioning material has collapsed and adhered to due to deterioration (Asahina Satoshi Law) Maintenance information: 2023.8.21 Operation has not been checked Accessories: case

ウッドキャビネットJapan

Ask 22-86895-46425-00
ウッドキャビネット
Manufacture:不明
Price: JPY 9,091
Japan
Shop: Osu shop
Arrival: 2023-08-13 19:54:02
description
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota) Accessories: none Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)

D-70Japan

Ask 23-39917-15433-00
D-70
Manufacture:音楽之友社
Price: JPY 36,182(pair)
Japan
Shop: Osu shop
Arrival: 2023-07-31 20:17:03
description
The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The FOSTEX 20cm double woofer enclosure D-70 is a plywood cutting service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in a stereo magazine at the time by Musico-no-Tomosha, and this is not a genuine assembly kit. There is no difference in dimensions or materials. Wiring, SP terminals, detailed instructions, etc. are not included. If you understand it, if you are a self-made person, how about DIY this summer!? * The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota) Accessories: box Key Specifications: Backload enclosure for 20cm double woofers Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight about 93.6 kg

ターンテーブルシート

Ask 23-38593-06929-00
ターンテーブルシート
Manufacture:不明
Price: JPY 1,727
Arrival: 2023-04-10 19:58:14
description
The price has been reduced. 2023.4.10 Turntable seat with sale price 2,000 yen unknown manufacturer. The material is soft and can be expected to have a vibration suppression effect. The exterior is scratched, dirty, and dull, and there is a feeling of use (Katsutsugu Hiura) Accessories: none Main specifications: thickness 4mm

1インチ用ホーン

Ask 20-27625-25574-00
1インチ用ホーン
Manufacture:不明
Price: JPY 20,000(pair)
Shop: Osu shop
Arrival: 2020-05-27 19:33:32
description
The price has been reduced. 2020/5/26 Sales price 29,800 yen Probably a 1 inch horn made by Raft Craft. When checked on the painted part, it is made of FRP-like material, and it is lightweight for its size, and can be carried by one man alone. The screw hole has holes for both ALTEC and JBL. There are many usability, dullness, scratches, paint peeling, etc. (Yoichi Murakoshi) Accessories: None Main specifications: Measured outer diameter dimensions approx. W835 × H250 × D835 mm Actual measured weight approx. 20.4 kg
23 results
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out