price cut! 2021/4/20 sales price 59,800 yen Accuphase channel divider. Comes with 800Hz 2way board You can change the crossover by replacing the board. It is one of the few channel dividers that allow you to enjoy multi-system with an analog feel. Appearance has small scratches and dullness corresponding to the year (Oikawa Tetsuji)
Maintenance information: 2021.4.20 Maintained (volume replacement, additional modification of wire rod muted relay and coupling capacitor degradation due to deterioration)
* Each input and output voice check crossover characteristics check interior and exterior has been cleaned.
Accessories: Power cable, manual copy
Main specifications: 2way · 3way divider frequency fixed W445 × H109 × D373mm 9.1kg
Low-type (80-2000Hz) specification Crossover 11 switchable Lux 2way channel divider popular model It is easy to operate and allows you to switch crossover finely and smoothly. There are small scratches. Serial M50410415 (Kondo Hirotsugu)
Maintenance Information: 2021.3.26 Operation Check
Accessories: Instruction manual, power cord, original box
Main Specifications: 2way channel divider HIGH/LOW independent level control crossover 11 stages (80/150/290/380/500/660/800/1000/1280/ 1700/2000Hz) RCA/BAL input/output W126 × H182 × D422mm 7.0 kg
※ Passing status quo · low price for bad condition. 1U size 2-way channel divider Input and output terminals are XLR only, cross can be switched between 600Hz/900Hz/1.2kHz, and LEVEL control is possible respectively. Large feeling of use such as processing marks, scratches, dirt, rust etc. on the mounting hole. Serial 3Z0146 (Takasaki Takasaki)
Maintenance Information: 2021.3.24 Operation confirmed
Accessories: None
Main specifications: 600Hz/900Hz/1.2KHz switching W480 × H44 × D303mm 3.5kg
Disposal price cut! (Eligible for membership discount) 2021/3/2 Selling price 64,800 yen Maintenance! Accuphase channel divider. 300Hz · 2 way board included You can change the crossover by replacing the board. It is one of the few channel dividers that allow you to enjoy multi-system while leaving an analog feel. Appearance is small scratches, there is a feeling of use such as dullness. Cereal 38Y938 (Tomoho Asaine)
Maintenance Information: 2021.3.2 Maintenance (Secondary Side Fuse Replacement Output ATT Mute Relay Coupling Capacitor Each Replacement Solder Resoldering Card Edge Contact Cleaning Each Audio Output (Crossover characteristic check interior and exterior cleaning)
Accessories: Instruction manual Copy power cord (1.0m)
Main Specifications: 2-way, 3-way divider frequency fixed type W445 × H109 × D373mm 9.1kg
price cut! 2021/2/23 sales price 70,000 yen maintained. 2-way, 3way channel dividers that can be switched in a variety of ways. It is compatible with a variety of crossovers, and can be adjusted at a fine level and is very convenient to use. There are small scratches and dullness corresponding to the year (Oikawa Tetsuji)
Maintenance Information: 2021.2.23 Maintained (LR MID-RANGE volume replacement.
In addition, high-range was replaced with a new volume just like MID-RANGE to ensure quality. (The sound is finally checked by adding aging operation)
Accessories: none
Main specifications: Low150/250/400/600/800/1KHz High1.5K/2.5K/3.5K/4.5K/6K/8Khz W200 × H149 × D316mm 3.8kg
Very unusual 500Hz, 3way specification of 7000Hz! Levinson fan coveted electric crossover From the feel of knob that seems to be a yamituki, you can see the goodness of early Levinson's creation. Usability is also good because it is an RCA terminal. Please enjoy the unique tone of Levinson. There is a feeling of use, Kusumi, small scratches. ※ Some terminals have been replaced. Power supply is PLS-153L (Sasaki Shota)
Maintenance information: 2021.2.14 Maintenance (replacement for rchHigh adjustment borium contact failure, all other borium contact cleaning, blocking characteristics inspection, spec inspection.) 2015.2.2 Maintenance carried out (4 potentiation meters for borium co-decomposition cleaning, Lch LOW vernier dial lock mechanism modification, spec inspection, inspection of each operation, volume adjustment port (Disassemble and clean the tension meter again)
Accessories: Power supply (PLS-153L), Power cable, Connection cable, Copy of explanation (English)
Main specifications: 3-way 500/7000Hz *500Hz 2-way can also be used Closed module type RCA input/output size (body) W483 × H51 × D156mm 2.8 kg Size (Power supply part) W101 × H101 × D256 mm 2.2 kg
* Operation is fine, but it is cheap so it will be passed as it is. Bellinger's easy channel divider. In addition to stereo 2Way mono 3Way, the mono subwoofer output also supports 2.1ch systems with excellent cost performance. There are dullness and small scratches on the whole. (Yoichi Murakoshi)
Maintenance information: 2021.1.3 sound confirmed
Accessories: power cord, original box
Main specifications: 2-way/3-way (mono) channel divider 2.1ch compatible W583 × H45 × D217mm 3kg
I cut the price! 2020/12/11 Selling price 49,800 yen Channel divider for rare SAE variable frequency 2WAY. Simple design, compact and easy to handle. Appearance, there are kusumi and bruises. serial 002632 (Eiji Tamura)
Maintenance Information: 2018.11.29 Maintenanced (All cleaning internal switches, slide VOL etc. (Operation check)
Accessories: No accessories
Main specification: W482 × H100 × D140mm 2.1kg