*Due to poor LOW volume, the specification has been changed so that only the low frequencies come out at full throttle. Other volumes can be used as normal. A pretty rare Yamaha channel divider. An electronic crossover network equipped with continuously variable crossover frequency, a 3-stage slope selector, and a Q control circuit. For 2 to 3 ways. The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Maintained (switches and volume contact repairs, LOW volume has passed circuitwise because parts cannot be obtained)
Accessories: none
Main specifications: crossover frequency Low-Mid: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz Mid-High: 800 Hz, 1.6 kHz, 3.2 kHz, 6.4 kHz, 12.8 kHz Low-Mid: 35 Hz to 1.13 kHz continuously adjustable by crossover fine adjustment knob, Mid-High: 565 Hz to 18.1 kHz continuously variable W435 × H72 × D349 mm 7.5 kg
Scarce! Altec's variable frequency mono channel divider! Deteriorated parts, including 10 deteriorated capacitors, have been replaced! The frequency can be changed by opening the front panel, and it is compatible with crossovers from 80 Hz to a maximum of 10,000 Hz, so a very wide range of settings can be made. It features a clear tone typical of Altec, and is a must-see for multi-system users using the company's amplifiers. The input/output is a lug type only, so please make your own RCA cables, etc. (SASAKI Shota)
Maintenance information: 2024.4.18 Maintained (neon tube lamp replacement, each C and R check. Replace power filter C and coupling C. ICOPAMP pin broken replacement. Front switch cleaning operation check)
Accessories: none
Main specifications: 2-way channel divider compatible with 120V specification crossover frequencies 80 Hz, 150 Hz, 250 Hz, 500 Hz, 800 Hz, 1,000 Hz, 1,500 Hz, 2,500 Hz, 5,000 Hz, 8,000 Hz, 10,000 Hz, W485 x H45 x D185 mm 2.5 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/13 sales price 128,000 yen Maintained! 800Hz/2 way specification This is the balanced input/output model of the F-15. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. You can adjust the multi-system correctly with clean, clutter-free sound. There are scratches and scratches on the exterior. Serial K8Y452 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 maintained (AC cord, push switch replacement, ATT disassembly cleaning, card edge contact cleaning, crossover characteristic check, interior and exterior cleaning)
Accessories: instruction manual
Main specifications: 2 way/3 way divider input/output RCA/XLR switching type frequency fixed by board W445 x H109 x D373 mm 9.1 kg
Maintained! A pretty rare Yamaha channel divider. An electronic crossover network equipped with continuously variable crossover frequency, a 3-stage slope selector, and a Q control circuit. It is for 2 to 3 ways. There are many scratches on the top plate, and other dullness and small scratches appropriate to the model year (Sasaki Shota)
Maintenance information: 2024.4.4 maintained (all 3WAY/2WAY changeover switches and front panel changeover switches are disassembled, their contacts are polished, and contact cleaner is applied. (Volume contact correction)
Accessories: none
Main specifications: crossover frequency Low-Mid: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz Mid-High: 800 Hz, 1.6 kHz, 3.2 kHz, 6.4 kHz, 12.8 kHz Low-Mid: 35 Hz to 1.13 kHz continuously variable by crossover fine adjustment knob, Mid-High: 565 Hz to 18.1 kHz continuously variable W435 × H72 × D349 mm 7.5 kg
An ultra-compact variable frequency channel divider. This is a product that allows you to easily enjoy multiple amps, and it is a must-see for those who want to try out multiple amps in the future. There are small scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: AC adapter
Main specifications: crossover frequency 1 kHz to 6 kHz continuously variable W109 x H28 x D60 mm approx. 240 g
Maintained! Levinson channel dividers. This is a rare open module type. It is currently set to 500 Hz, but the frequency can also be changed (with a paid service). It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. The power supply unit is PSL-153L. There are threads and dullness on the exterior. Serial 0082/6435 (Tamura Eiji)
Maintenance information: 2024.3.22 Maintained (replacement of deteriorated parts. Other inspections and adjustments)
Accessories: power cable, connection cable
Main specifications: 2-way crossover 500 Hz main unit W483 x H51 x D156 mm 3.9 kg power supply unit W101 x H101 x D256 mm 2.2 kg
Maintained. It is a rare 500Hz and 7000Hz 3-way specification. An electric crossover coveted by Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. Since it is an RCA terminal, it is easy to use. Please enjoy the unique sound of Levinson. The exterior is dull and has a feeling of use. ※The knob lock is broken and cannot be fixed. The power supply is PLS-150. Serial 0039/1959 (Tamura Eiji)
Maintenance information: 2024.3.22 Maintained (replacement of deteriorated parts. Other inspections and adjustments. The knob lock parts are damaged, but this is the current state because parts are not available (there is no problem with normal use))
Accessories: power cable
Main specifications: 3-way crossover 500/7,000 Hz main body W483 x H51 x D156 mm 3.9 kg power supply unit W101 x H101 x D256 mm 2.2 kg
※ There are dents on the back, so it is inexpensive. Behringer's handy channel divider. In addition to stereo 2-way mono 3-way, it is also compatible with 2.1 channel systems due to the mono subwoofer output. It has excellent cost performance. There are dirt, line scratches, and dents on the exterior. Serial S1202185132 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: 2-way, 3-way (mono) channel divider, 2.1 channel compatible, W583 x H45 x D217 mm, 3 kg
A convenient channel divider with a variable crossover frequency. It is possible to use 2 ways in stereo and 3 ways in mono. If you already have one, you can step up to 3 ways. The sound quality is straight without any quirks. Does not damage the individuality of amplifiers and units (Ryo Mizusaki)
Maintenance information: 2024.3.14 storefront operation confirmed
Accessories: manual, power cable
Main specifications: XLR and 1/4 stereo phone plaque entry/exit card terminal W483 x H44 x D152 mm 3.6 kg
A convenient channel divider with a variable crossover frequency. It is possible to use 2 ways in stereo and 3 ways in mono. If you already have one, you can step up to 3 ways. The sound quality is straight without any quirks. Does not damage the individuality of amplifiers and units (Ryo Mizusaki)
Maintenance information: 2024.3.14 storefront operation confirmed
Accessories: manual, power cable
Main specifications: XLR and 1/4 stereo phone plaque entry/exit card terminal W483 x H44 x D152 mm 3.6 kg
Maintained! A 2-way and 3-way channel divider that can be switched in a variety of ways. It is compatible with various crossovers, can be adjusted at a detailed level, and is very easy to use. There is dullness in places (Kojima Yosuke)
Maintenance information: 2024.2.18 Maintained (all 6 volume volumes, 3 transistors, 6 electrolytic capacitors, 38 other capacitors replaced, each rotary switch contact cleaned, and each sound output confirmed)
Accessories: none
Main specifications: 3-way/2 way Low150/250/400/600/800/1kHz High1.5k/2.5k/3.5k/4.5k/6k/8kHz W200×H149×D316mm 3.8 kg
Maintained. We have all UNIT modules 0 to 4! This channel divider is very easy to use. It is possible to switch from 2 way to 4 way with a single switch, including switching the crossover frequency. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.2.4 Maintained (The normalized wiring of the 2 UNIT0 modules in the modified part has been corrected. We have confirmed the normal operation of LPF/HPF with the module alone. It is sealed with a module screw lock. The DC offsets for all channel amplifiers have been readjusted. The cutoff frequency characteristics and phase characteristics of all module units were measured, and all module frequency errors were confirmed with phase differences. (We have confirmed that the phase error between each module is within ± 5 degrees at all frequencies)
Accessories: modules 0 to 4
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg
The price has been reduced. 2024/1/25 sales price 69,800 yen Maintained! JBL UREI standard channel divider. Recommended for those using JBL4345 or 4355 with 2 way/290 Hz specifications. A must have for multi-channel systems in 70s PA systems. There are small scratches and dullness on the exterior. ※The balance connection is No. 3 HOT. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 02174 (Hiroki Aso)
Maintenance information: 2024.1.25 Maintained (CH2 IC replacement solder correction operation check)
Accessories: A copy of the English instruction manual
Key Specifications: Crossover 290 Hz W483 ✕ H44 ✕ D194 mm Weight 1.8 kg
*Currently sold. A channel divider that can be switched between 2 ways and 3 ways for stereo and up to 4 ways for mono. It is a car that is easy to operate and can be enjoyed in a variety of ways. The sound quality is neutral, typical of commercial use. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.26 Operation confirmed
Accessories: none
Main specifications: crossover frequency stereo mode low/high 45 to 960 Hz or 450 Hz to 9.6 kHz, LOW/MID 45 to 960 Hz or 450 Hz to 9.6 kHz, mid/high 450 Hz to 9.6 kHz frequency band 20 Hz to 20 kHz W483 x H45 x D150 mm 2.4 kg
Maintained! This is an unusual open module, making it an ideal crossover 250Hz for the JBL 4350. The crossover frequency can be changed for a fee. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. Since the main input/output has been changed to RCA, the Remo pin is not included (Wang Zhan)
Maintenance information: 2023.12.21 maintained (all 4 potential meters replaced. The power supply unit has been refilled. The 160Hz setting was changed to 250Hz. Other inspections and adjustments have been made)
Accessories: instruction manual copy, power cable, connection cable, power supply unit
Main specifications: 2-way crossover 250Hz main unit W483 x H51 x D156 mm/3.9 kg Power supply unit W101 x H101 x D256 mm/2.2 kg
The disposal price has been reduced. Member prices are not applicable. 2023.12.21 Sales price 378,000 yen Maintained! It is an unusual open module and is an ideal crossover 290 Hz for the JBL 4344. The crossover frequency can be changed for a fee. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. Since the main input/output has been changed to RCA, Remo pins are not included (Wang Zhan)
Maintenance information: 2023.12.21 Maintained (all 4 potentiometers have been replaced, 11 capacitors have been replaced. I set it to 290 Hz. Other inspections and adjustments have been made)
Accessories: copy of instruction manual, power cable, power supply unit
Main specifications: 2-way crossover 290 Hz main unit W483 x H51 x D156 mm 3.9 kg power supply unit W101 x H101 x D256 mm 2.2 kg
Maintained! It's a rare open module, and it's a 650 Hz crossover perfect for the JBL M9500 and Exclusive 2401Twin. The crossover frequency can be changed for a fee. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. The exterior has stains and small scratches (Wang Zhan)
Maintenance information: 2023.12.21 maintained (all 4 potential meters replaced. Deteriorated capacitors, resistors replaced. Other inspections and adjustments have been made. It's set to 650 Hz)
Accessories: instruction manual copy, power cable, power supply unit, 6 Remo pins
Main specifications: 2-way crossover, 650 Hz, main body, W483 x H51 x D156 mm, 3.9 kg, power supply, W101 x H101 x D256 mm, 2.2 kg
Maintained! This is an unusual open module, making it an ideal crossover 250Hz for the JBL 4350. The crossover frequency can be changed for a fee. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. The exterior has stains and small scratches (Wang Zhan)
Maintenance information: 2023.12.21 maintained (all 4 potential meters replaced. The defective volume and capacitor have been replaced. The power supply unit has been refilled. The 100Hz setting was changed to 250Hz. Other inspections and adjustments have been made)
Accessories: instruction manual copy, power cable, connection cable, power supply unit, 6 Remo pins
Main specifications: 2-way crossover 250Hz main unit W483 x H51 x D156 mm/3.9 kg Power supply unit W101 x H101 x D256 mm/2.2 kg
Maintained by Luxman Service! LOW type (80 to 2000 Hz) specification. A popular Lax 2-way channel divider model that can be switched between 11 levels of crossover. The operability is good, and you can switch between crossovers finely and smoothly. There are small scratches here and there (Sasaki Shota)
Maintenance information: 2023.12.16 manufacturer maintenance completed (input balance/coaxial changeover switch has poor contact, all contacts have been cleaned. (Inspection of other parts, check characteristics)
Accessories: power cable
Main specifications: 2-way channel divider HIGH/LOW independent level control crossover 11 stages (80 150 290 380 500 660 800 1000 1280 1700 2000 Hz) RCA-BAL input/output W126 x H182 x D422 mm 7.0 kg
Maintained! Pioneer's variable frequency 3-way channel divider. Detailed adjustments are possible, and it is recommended for those who want to use it for multiple purposes such as making their own. There is a feeling of use (Goto Daiki)
Maintenance information: 2023.12.16 Maintenance completed (lamp ran out and replaced (changed to LED). The switches have been disassembled and the contacts cleaned. The electric field capacitor and transistor were replaced because there was a lot of noise. I checked each input and switch frequency.)
Accessories: none
Main specifications: 3-way/2-way compatible cutoff frequency LOW/LOWPASS, 125 Hz, 250 Hz, 500 Hz, 700 Hz, 1 kHz, 1 kHz MID/LOWCUT 125 Hz, 250 Hz, 500 Hz, 700 Hz, 1 kHz MID/HIGHCUT 1 kHz, 2 kHz, 2 kHz, 6 kHz, 8 kHz HIGH/HIGHPASS 1 kHz, 2 kHz, 4 kHz, 6 kHz, 8 kHz W350 × H138×D329mm 5.6kg
The price has been reduced! 2023/12/15 Sales price 378,000 yen Maintained! Mark Levinson's famous channel divider. It is an unusual open module type. It is currently set to 500 Hz, but it is possible to change the frequency (with a paid service). It lets you hear sounds unique to Levinson due to the ease of construction unique to the early Levinson. PLS-153L power supply. There are small wounds and dullness (Fujisawa Yukishi)
Maintenance information: 2023.12.15 Maintained (all contacts were cleaned due to poor contact with the main unit gain volume, replaced all power supply deteriorated capacitors, output voltage readjusted, shut off characteristics checked, and spec checked.)
Accessories: instruction manual copy, power cord, connection cord, power supply unit, 3 pairs of Remo pins
Main specifications: main unit W483 x H51 x D156 mm, weight 3.9 kg, power supply unit W101 x H101 x D256 mm, weight 2.2 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 278,000 yen Maintained! This is a 500Hz crossover specification. Chandeba aims to achieve an accurate crossover by manufacturing a board for each speaker! This time, the sound quality is also attractive, with a core while being warm typical of KRELL. There is writing on the side of the exterior, and there are other threads overall. Genuine Axis product (Ryo Mizusaki)
Maintenance information: 2023.12.10 Maintained (*Contact points were cleaned due to poor contact with 4 parts of the volume, all replaced due to poor power supply electrolyte capacitor deterioration, readjusted the DC offset and bias of each amplifier, replaced 4 holes, inspected blocking characteristics, and inspected specifications. (The main unit's capacitor has been replaced in the past, and the measured cross frequency was 500 Hz)
Accessories: power supply unit, power cord, connection cord, copy of instruction manual
Main specifications: crossover 500 Hz 2 way channel divider Axis regular imported product input RCA x 1 balance x 1 main unit: W483 x H70 x D383 mm 6.8 kg power supply unit: W222 x H64 x D286 mm 3.3 kg
The price has been reduced. 2023/12/10 Sales price 278,000 yen Maintained! This is a 650 Hz crossover specification for the JBL M9500/S9500. Chandeva is trying to achieve an accurate crossover by manufacturing a board for each speaker! This time, the sound quality is also attractive, with a core in the warmth typical of KRELL. The exterior has writing on the side, and there are other threads overall. Genuine Axis product (Mizusaki Ryo)
Maintenance information: 2023.12.10 Maintained (*Contact cleaning was performed due to poor contact with 4 volums, DC offset and bias readjustment for each amplifier, 4 rubber feet were replaced, blocking characteristics were checked, and specs checked. (The electrolytic capacitors on the power supply unit and main unit have been replaced in the past, and the measured cross frequency was 650 Hz)
Accessories: power supply unit, power cord, connection cord, copy of instruction manual
Main Specifications: Crossover 650 Hz 2 Way Channel Divider Axis Regular Imported Product Input RCA x 1 Balance x 1 Main Unit: W483 x H70 x D383 mm 6.8 kg Power Supply: W222 x H64 x D286 mm 3.3 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 278,000 yen Maintained! This is a 100Hz crossover specification. Chandeba aims to achieve an accurate crossover by manufacturing a board for each speaker! This time, the sound quality is also attractive, with a core while being warm typical of KRELL. There is writing on the side of the exterior, and there are other threads overall. Genuine Axis product (Ryo Mizusaki)
Maintenance information: 2023.12.10 Maintained (*Contact points were cleaned due to poor contact with 4 parts of the volume, all replaced due to poor power supply electrolyte capacitors deterioration, readjusted the DC offset and bias of each amplifier, replaced 4 rubber feet, inspected blocking characteristics, and inspected specifications. (The main unit's capacitor has been replaced in the past, and the measured cross frequency was 100 Hz)
Accessories: power supply unit, power cord, connection cord, copy of instruction manual
Main specifications: crossover 100 Hz 2 way channel divider Axis regular imported product input RCA x 1 balance x 1 main unit: W483 x H70 x D383 mm 6.8 kg power supply unit: W222 x H64 x D286 mm 3.3 kg
Disposal prices have been reduced! Member prices are not applicable. 2023/12/7 Sales price 698,000 yen Maintained! VIOLA channel divider. 680Hz/2way specification A choke input transformer, which is VIOLA's family art, is used. This reduces electromagnetic interference and greatly reduces electrical stress generated on the power supply unit. Furthermore, it is designed to be resistant to noise and distortion from AC lines so that the power of AC power supplies can be used to the fullest (Fujisawa Yukishi)
Maintenance information: 2023.12.6 Maintenance has been completed (all have been replaced due to poor operation due to oil sticking to the VOL knob for gain adjustment (only the outer knob has been replaced and the original VOL continues to be used), and the specs and blocking characteristics have been checked. (The measured cross frequency was 680 Hz)
Accessories: power supply unit, power cable, connection cable
Main Specifications: Crossover 680 Hz Main Unit W447 x H45 x D406 mm Weight 8.5 kg Power Unit W223 x H91 x D406 mm Weight 9.1 kg
The price has been reduced. 2023/12/2 sales price 178,000 yen manufacturer maintenance completed! 2way dedicated multi-channel divider for the 290Hz crossover. I recommend it for the JBL4344. Specially designed for 2 ways with balanced input/output circuits. Clear and fresh multi-systems can be constructed (Sasaki Shota)
Maintenance information: 2023.12.2 manufacturer maintenance completed (each ATTENUATOR's contacts have been cleaned. The legs were replaced, and the contacts on each input/output terminal were cleaned. Interior and exterior cleaning. You can check each function and performance. Pressure resistance, safety confirmation OK. (After aging for half a day, it was confirmed that no noticeable noise was generated during ATTENUATOR operation)
Accessories: instruction manual, power cable, FB-290 board
Main specifications: crossover 290 Hz W475 x H150 x D395 mm weight 10 kg
LOW type (80 to 2000 Hz) specification. A popular Lax 2-way channel divider model that can be switched between 11 levels of crossover. The operability is good, and you can switch between crossovers finely and smoothly. Exterior, dullness, and small scratches (Asaina Tomonori)
Maintenance information: 2023.11.27 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: 2-way channel divider HIGH/LOW independent level control crossover 11 stages (80 150 290 380 500 660 800 1000 1280 1700 2000 Hz) RCA-BAL input/output W126 x H182 x D422 mm 7.0 kg
The price has been reduced. 2023/11/21 sales price 148,000 yen A 2-way multi-channel divider loaded with an FB-350. Specially designed for 2 ways with balanced input/output circuits. You can build a clear and fresh multi-system. There are no major scratches on the outside, but overall there are dullness and stains. The power cable is not genuine (Oikawa Tetsuji)
Maintenance information: 2023.11.21 Operation confirmed
Accessories: power cable (non-genuine), instruction manual
Main specifications: crossover 350Hz W475 x H150 x D395mm weight 10 kg
Disposal prices have been reduced! (Member discount will not apply) 2023/11/17 Sales price 398,000 yen Maintenance completed! Comes with a cabinet Mark Levinson's famous channel divider. 2-way 300Hz specification It lets you hear sounds unique to Levinson due to the ease of construction unique to the early Levinson. The power supply unit is PLS-153L. The exterior is a beautiful individual for its age. Genuine RF serial 0500/3711 (Yonejima Satoshi)
Maintenance information: 2023.11.17 Maintained (all deteriorated power supply capacitors have been replaced. Output voltage readjustment. All main body volume contacts have been cleaned. Blocking characteristics inspection. Spec inspection)
Accessories: power supply unit, power cable, 4 Remo Pins ✕, connection cable
Main specifications: main unit W483 x H51 x D156 mm, weight 3.9 kg, power supply unit W101 x H101 x D256 mm, weight 2.2 kg
This is a 290 Hz crossover for the JBL 4344. Chandeva is trying to achieve an accurate crossover by manufacturing a board for each speaker! This time, the sound quality is also attractive, with a core in the warmth typical of KRELL. Genuine Axis product (Fujisawa Yukishi)
Maintenance information: 2023.11.15 Operation confirmed
Accessories: power supply unit, power cord, connection cord
Main Specifications: 290 Hz 18dB/OCT 2 Way Channel Divider Axis Regularly Imported Product Input RCA x 1 Balance x 1 Main Unit: W483 x H70 x D383 mm 6.8 kg Power Supply: W222 x H64 x D286 mm 3.3 kg
Prices have been reduced! 2023/11/10 sales price 350,000 yen This is an electric crossover coveted by Mark Levinson fans. 2-way 100Hz specification You can see how well the early Levinson was built from the feel of the knob, which seems to be addictive. The sound unique to Levinson can also be heard intensely with the divider. The exterior has scuffs and color unevenness. Serial 0121, 0185 (Tamura Eiji)
Maintenance information: 2023.10.11 maintenance completed (all power supply deterioration capacitors replaced, output voltage adjustment, contact cleaning for all main body volume, level adjustment, cutoff characteristic inspection, specification inspection)
Accessories: copy of the instruction manual, connection cable, power cable
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply unit) W101 x H101 x D256 mm 2.2 kg
A channel divider for rare FM. 2-way 650 Hz specification A very simple and easy to use camera with only balance terminals for both input and output. The sound quality is crystal clear and has no habit of choosing an amplifier or speaker. You can easily switch between them with the included crossover changeover chip. The exterior is dull over time, and there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.11.10 Operation confirmed
Accessories: crossover switching chip
Main specifications: 2 way 650 Hz specification 115V specification input/output terminal XLR only included crossover chip 290 Hz, 600 Hz W445 x D270 x H57 mm
※Since the click volume and front LED lamps have been changed to those manufactured outside the company, they are inexpensive. This is Pass Lab's channel divider that first arrived at HIFIDO. It is set to 2 way/250 Hz specifications. Recommended for 4350 users. The frequency can be changed arbitrarily. There are small scratches here and there (Fujisawa Yukishi)
Maintenance information: 2023.11.8 operation confirmed
Accessories: power cord, connection cord (Misumi), connection cord (genuine), 2 frequency change manuals
Main specifications: 250Hz 18dB/OCT main body W432 x H88 x D320 mm Weight 7.5 kg Power supply unit W432 x H88 x D300 mm Weight 8.08 kg
※Since it is inexpensive, it will be handed over as is. Rackmount is missing. Behringer's handy channel divider. In addition to stereo 2-way mono 3-way, it is also compatible with 2.1 channel systems with a mono subwoofer output. Excellent cost performance. The exterior has scratches, dullness, etc. Serial S170703950132 (Tomonori Asaina)
Maintenance information: 2023.11.6 operation confirmed
Accessories: power cord
Main specifications: 2-way, 3-way (mono) channel divider, 2.1 channel compatible, W583 x H45 x D217 mm, 3 kg
Disposal prices have been reduced! (Member discount will not apply) 2023/11/2 sales price 64,800 yen Accupphase channel divider for 2 way/3 way. Comes with a 500Hz/2way board! You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. As for the exterior, there are scratches and dirt on the top plate. Serial I8X071 (Yonejima Satoshi)
Maintenance information: 2023.11.2 operation confirmed
Accessories: instruction manual copy power cord
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
Maintained in 2022/10. An authentic channel divider that can be used from 2 to 4 ways. The crossover is 63 to 16 kHz variable, and the level control for each band uses an attenuator type with 1 dB steps. It is a model that has a high degree of freedom and enables intuitive operation. The exterior is dull and there is a feeling of use (Hiura Katsuji)
Maintenance information: 2022.10.16 Maintained (replaced due to low channel interruption and poor muting relay contact. Crossover switch, level volume, etc. contact cleaning. Replace the circuit part of the power supply circuit that is close to heating the electrolyte capacitor. Check the operating frequency of each input/output.)
Accessories: instruction manual (copy)
Main Specifications: 2/3/4 Way Compatible Low Range Variable Frequency 63 to 630 Hz Mid Range Variable Frequency 320 to 3200 Hz High Range Variable Frequency 1600 to 16000 Hz Blocking Slope 6/12/18 dB/OCT Level Control - 30 dB to 0 dB W420 x H150 x D352 mm 8.7 kg
The price has been drastically reduced! 2023// Sales price yen price has been reduced! 2023/10/9 sales price 298,000 yen 3-way cross channel divider with 650 Hz/10,000 Hz specifications. If you add the optional LA-25 and DA-25, it can support up to 4 ways. Also, since it can be used by switching to a subwoofer system or a 3D system, it has high expandability and can be flexibly incorporated into the system. The exterior has scratches and dullness. Serial L2Y087 (Kimiya Miura)
Maintenance information: 2023.10.9 operation confirmed
Accessories: no accessories
Main Specifications: Crossover 650 Hz/10,000 Hz Dimensions W475 x H170 x D380 mm Weight 20 kg
An AI2-B1 balanced input option board is included. 4-way specification with 2 DN-35 units added to the base housing. The high-sampling 192 kHz/24 bit compatible digital channel divider enables accurate phase control unique to this machine. There is a feeling of use such as appearance, dullness, scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.10.4 sound output confirmed
Accessories: instruction manual, power cable
Main specifications: 54 points crossover frequency, 7 types of damping characteristics, digital inputs: coaxial (RCA), 1 system, size, W475 x H171 x D405 mm, weight 18 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/9/6 sales price 118,000 yen*Inexpensive due to poor condition such as blows etc. 800 Hz/5,000 Hz 3-way specification. This is a refined model of the F-15. It's one of the few channel dividers where you can enjoy multiple systems while leaving an analog feel. Multi-system adjustments can be made correctly with clean, noise-free sound. There are scratches, scratches, and dirt on the exterior. Serial A0Y677 (Tamura Eiji)
Maintenance information: 2023.9.6 Operation confirmed
Accessories: copy of instruction manual
Main specifications: 800 Hz/5,000 Hz 3-way specification, input/output RCA/XLR switchable type, frequency is fixed by board W445 x H109 x D373 mm 9.1 kg
The price has been reduced. 2023/9/5 sales price 99,800 yen HI type (800 to 20,000 Hz) specification. Lux 2-way channel divider that can be switched between 11 crossover levels. LUX from this era is still well-made! It is compact and has a finish that can be said to have high performance. Our greatest advantage is that it doesn't take up much space. The exterior is dull and has small scratches. Serial M10710255 (Kimiya Miura)
Maintenance information: 2023.9.5 Operation confirmed
Accessories: power cable
Main specifications: High and low independent level control crossover 11 stages (800 1500 2900 3800 5000 6600 8000 10000 12800 17000 20000 Hz) RCA-BAL input/output power consumption 24 W W126 x H182 x D422 mm 7.0 kg
The price has been reduced. 2023/9/3 sales price 398,000 yen. Maintained! Mark Levinson's famous channel divider. 2 way/250 Hz specification. It lets me hear sounds unique to Levinson from the ease of construction unique to Levinson in the early days. Recommended for JBL4350 owners. PLS-150 power supply There is an appearance, dullness, small scratches, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintenance completed (all deteriorated power supply capacitors replaced, output voltage readjustment, main body volume 4 contact cleaning, volume ground replacement, cross characteristic inspection, specification inspection, operation inspection)
Accessories: manual copy, power cable, connection cable, power supply unit, remo pin x 3 pairs
Main specifications: main unit W483 x H51 x D156 mm weight 3.9 kg power supply part W101 x H101 x D256 mm weight 2.2 kg
The price has been reduced. 2023/8/25 Sales price 29,800 yen ※We have confirmed the sound, but since it is cheap, it is currently sold. Channel divider for high frequencies by Ishino Labo. The high cut is continuously variable from 6 kHz to 24 kHz. Ideal for adding tweeter amplifiers, etc. (Yoichi Murakoshi)
Maintenance information:2023.8.23 sound output confirmed
Accessories: power cord
Main specifications: W290 x H65 x D170 mm 1 kg
※This is a product currently sold for business use. It is equipped with a 3-way crossover 300 Hz and 7,000 Hz boards. Perfect for systems that use woofers and midbass. The exterior is dull on the top plate, and there are footprints (Sasaki Shota)
Maintenance Information: 2023.8.9 Operation confirmed
Accessories: power cable
Main specifications: channel divider, 3-way crossover, 300 Hz/7,000 Hz board mounted, W482 x H44 x D285 mm, 3.5 kg
*Currently sold. A channel divider that allows you to switch between 2 ways and 3 ways for stereo and 4 ways for mono. It's a car that's easy to operate and you can enjoy a variety of things. The sound quality is neutral, typical for business use. There is a slight feeling of use on the exterior (Kobayashi Hitoshi)
Maintenance Information: 2023.7.30 Operation confirmed
Accessories: none
Main specifications: crossover frequency stereo mode low/high 45 to 960 Hz or 450 Hz to 9.6 kHz, LOW/MID 45 to 960 Hz or 450 Hz to 9.6 kHz, MID/high 450 Hz to 9.6 kHz frequency band 20 Hz to 20 kHz W483 x H45 x D150 mm 2.4 kg
Bellwood Lansing channel divider. It will probably be a made-to-order item. Details are unknown, but the previous owner used the JBL Paragon, and it is a 3-way specification. Dull, there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.8.4 Sound output for each band has been confirmed.
Accessories: power cable
Main specifications: 3-way channel divider W340 x H75 x D250 mm 2.7 kg (actual measurement)
Maintained! A 2-way and 3-way channel divider that can be switched in a variety of ways. It is compatible with various crossovers, can be adjusted at a fine level, and is extremely easy to use. The exterior has dullness and small scratches appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2023.7.26 Maintained (LEVEL volume partially changed, all 6 locations replaced, input/output RCA terminals partially loose, all 8 locations replaced, all 42 coupling capacitors replaced due to occasional crackling noise, power supply circuit, transistor noise exchange, other input/output connection sounds confirmed)
Accessories: copy of instruction manual
Main specifications: Low150/250/400/600/800/1kHz High1.5K/2.5K/3.5K/4.5K/6K/8KHz W200 × H149 × D316mm 3.8 kg
The price has been drastically reduced. 2023/7/16 sales price 8,000 yen. *We were able to confirm that the sound output is for mono, but since it is cheap, it is currently sold. Electrovoice active controller. This is a 1U size speaker crossover system. There is a feeling of use, dullness, and small scratches. Serial 94132827 (Takasaki Atsushi)
Maintenance information: 2023.7.3 operation confirmed
Accessories: power cord
Main specifications: crossover 1,100 Hz W483 × H45 × D230 mm 3.7 kg
A multi-channel divider that has been completely remodeled from the DF-55! It is equipped with a high-speed, high-precision DSP to achieve higher order filter characteristics with even less error. Also, the monophonic mode, which enables the D/A converter to be driven in parallel, makes it possible to make full use of the DF-65 to further improve performance. The exterior is dull, etc., and there is a feeling of use. Serial E7Y065 (Asae Tomonori)
Maintenance information: 2023.6.16 operation confirmed (sound output confirmed for all channels)
Accessories: instruction manual, power cord, original box
Main specifications: cutoff frequency 31.5 Hz to 22.4 kHz (-30 dB, 59 points) attenuation characteristics 6 dB/octave, 12/octave, 18/octave, 24/octave, 48/octave, 96/octave level control, each band +45.0 dB to 40.0 dB (0.1 dB steps), time alignment set in 0.5 cm units to a maximum of 3000 cm, memory function 1 to 5 analog inputs 2 systems (RCA, XLR) 3 digital input systems (coaxial, optical, HS-LINK) 1 digital audio output system (HS-LINK) pre-out: 4 systems (RCA/XLR x 4)
W465 x H151 x D396 mm 15.1 kg