I opened an unopened item. There is white rust on the back. Attenuator for Fostex Easy to use attenuator such as changing the volume of the high frequency side such as multi-system etc. (Atsushi Takasaki)
Accessories: original box, instruction manual, plate, knob
Main specifications: Impedance 8Ω attenuation 0 ~ 40 dB or more Input 100W (Mus.) Shaft effective length 30mm W50 × H50 × D71mm 0.1 kg/1 unit
The inductance value is thought to be 0.3 mH from the value written on the seal, but the details are unknown. The exterior is dull and has adhesive marks (Tomonori Asae)
Accessories: none
Main specifications: 35 mm in diameter x 20 mm in thickness 80 g per piece
Comes with original box. Genuine Fostex speaker grille It is made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (Tetsuji Oikawa)
Accessories: original box, instruction manual
Comes with original box. Genuine Fostex speaker grille It is made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (Tetsuji Oikawa)
Accessories: original box, instruction manual
※Only 1 piece. Fostex 1dB step transformer attenuator It uses a large single-winding transformer and a reliable rotary switch with low contact resistance. Appearance has a feeling of use such as dullness small scratches rust etc. (Shota Sasaki)
Accessories: none
Main specifications: 8Ω allowable input 100W (when using network) attenuation 0-12dB Size W88 × H90 × D170mm approx. 970g
Comes with original box. Genuine Fostex speaker grille It is made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (Tetsuji Oikawa)
Accessories: original box, instruction manual
Fostex attenuator. It is an easy-to-use attenuator that allows you to easily change the volume on the high frequency side of multi-systems, etc. The exterior is good (Hitoshi Kobayashi)
Maintenance information:2023.6.14 sound output confirmed
Accessories: instruction manual
Main specifications: impedance 8 ohms, attenuation of 0 to 40 dB or more, input 100 W (Mus.), shaft effective length 30 mm, W50 x H50 x D71 mm, 0.1 kg
※It is cheap because it is in poor condition. FOSTEX Speaker Network Capacitors Set of 2 (Tomoho Asaine)
Accessories: none
Key Specifications: 1.5μF capacitance
Fostex metallized polypropylene film capacitors, used set of 2. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unchecked
Accessories: none
Key Specifications: 1.0 μF capacity
*Currently on sale. Fostex coil transformers sold in pairs of 18MH. There is dirt on the exterior. (Miura Kimiya)
Maintenance information: 2023.6.21 operation confirmed
Accessories: no accessories
Main specifications: W88 x H55 x D49 mm 0.64 kg/piece
Fostex 1dB step transformer attenuator It uses a large single-winding transformer and a reliable rotary switch with low contact resistance. Appearance has a feeling of use such as dullness small scratches rust etc. (Shota Sasaki)
Accessories: none
Main specifications: 8Ω allowable input 100W (when using network) attenuation 0-12dB Size W88 × H90 × D170mm approx. 970g
Air core coil for networks by FOSTEX There are solder marks on the exterior (Satoshi Yonejima)
Maintenance information: 2021.12.25 continuity confirmed
Accessories: original box
Main specifications: Inductance 3.5mH
This is a genuine standard weight for the FR-64S, which is rarely available as a single item. It is essential for those who have lost it and those who only have option weights (Murakoshi Yoichi)
Accessories: none
Main specifications: 227g
Choke Transformer Sold 1 Piece USA Made 10H/100mA DC Resistance 268Ω (Actual Measurement 250Ω) W75×H95×D66mm Approx. 1.3 kg (Measured, Not Including Protrusions) (Yosuke Kojima)
Accessories: None
Line transpair sale Primary: 200-600Ω Secondary: 600Ω W75 × H71 × D43mm Approx. 0.7kg/piece (actual measurement, not including protrusions) Judged as TN-2A from specifications, FUJI transformer's It has a badge, but it is the same product as Tamura made with wiring diagram (copy) (Yosuke Kojima)
Accessories: wiring diagram (copy)
Line matching transparent pair sold primary: 600 ohms, output 10 dBm, frequency range 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, is Tamura's OEM specification (Yosuke Kojima)
Accessories: none
Disposal prices have been reduced! (Member discount does not apply) 2023/8/26 sales price 2,000 yen how about a rubber type woofer edge pair DS-600Z, etc. The exterior is generally good (Asaina Satoshi method)
Accessories: water-based bond brush
Main specifications: Overall edge diameter 247 mm Edge roll outer diameter 226 mm Cone diameter 190 mm Edge inner diameter 179 mm
Full Tech soldered gold-plated AC inlet. All parts are non-magnetic, and gold-plated electrodes are used, and it is an audio grade AC inlet with solder developed in pursuit of the best sound quality (Tamura Eiji)
Accessories: none