The price has been reduced. 2023/10/6 Sales price 10,000 yen ※1 bottle only. This is a rare JBL bi-radial horn. It is thicker and heavier than the 2385A, and is well built. The 2385 is a fixed directional horn with a slightly narrowed horizontal direction angle compared to the 2380, and the sound pressure level is about 2 dB higher. Also, the throat diameter, horn length, and opening dimensions are the same as 2380. The exterior has scuffs, scratches, and stains. Serial 021530 (Tamura Eiji)
Accessories: no accessories
Main specifications: directivity (-6 dB points) horizontal 70° (500 Hz to 16 kHz) vertical 40 degrees (2 kHz to 16 kHz) throat diameter 5 cm dimensions W445 x H279 x D236 mm weight 4.6 kg/1 bottle
Prices have been drastically reduced. 2023/7/15 sales price 8,000 yen. A self-made horn whose purpose is unknown. Why don't you attach it to a tweeter, etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: opening diameter 13 x 71 mm W225 x H145 x D146 mm 859 g
Unspecified Sloat. It is a straight type. It's been deadened (Oikawa Tetsuji)
Main specifications: length 332 mm, throat outer diameter 52 mm, inner diameter 40 mm, 2.9 kg (actual measurement)
The price has been reduced. 2023/7/16 sales price 49,800 yen 2inch straight short horn. Compared to 2350, etc., there is little afterglow, and it has a sharp sound that comes off quickly and disappears quickly. It's a straight yet straightforward sounding character, and it's the perfect size for those who want to embed both horn and tweeter into an enclosure. The appearance, paint peeling, scuffs, dullness, etc. can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: 500 Hz to 90 degrees horizontally 45 degrees vertically
The price has been reduced. 2023/9/2 sales price 39,800 yen Altec standard, 4 sector horn for 1 inch. You can enjoy the sharp, sharp horn sound unique to ALTEC with your favorite 1-inch driver, such as the 802-8D. There is a feeling of use such as appearance, dullness, rust, paint peeling, etc. (Kobayashi Hitoshi)
Accessories: mounting stand bracket
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D486 mm 6.7 kg
The price has been reduced. 2023/9/6 Sales price 59,800 yen ※Deadening has been applied. Round straight horn for mid to high frequencies. It can be combined with SG370, etc. The exterior is covered with dust and paper. (MIURA Kimiya)
Accessories: no accessories
Main specifications: total length 300 mm, aperture 220 mm, cutoff frequency 500 Hz, optimal crossover 800 Hz to 1 kHz
The price has been reduced. 2023/8/3 sales price 49,800 yen 2inch straight short horn. Compared to 2350, etc., there is little afterglow, and it has a sharp sound that comes off quickly and disappears quickly. It's a straight yet straightforward sounding character, and it's the perfect size for those who want to embed both horn and tweeter into an enclosure. Exterior, generally good (Murakoshi Yoichi)
Accessories: none
Main specifications: 500 Hz to 90 degrees horizontally 45 degrees vertically
The price has been reduced. 2023/7/31 sales price 69,800 yen JBL wooden horn for 2 inch screwdrivers. Since it was originally designed only for concert halls, it is a horn that spreads sound over a wide area without difficulty. Since it's made of wood, it has a warm, soft tone that is different from metal. There are abrasions on the back side of the individual on one side of the exterior, but the others are about dullness and can be said to be generally good (Kobayashi Hitoshi)
Accessories: none
Main specifications: directionality 140 degrees x 60 degrees (horizontal x vertical), crossover frequency 800 Hz, W660 x H95 x D340 mm, weight 4.4 kg
The price has been reduced! 2023/8/11 sales price 29,800 yen*Currently sold. Horn-shaped midrange unit with AT-50H. FO.Q (IP-11) with cable insulator! A die-cast horn is used, and uniform directional characteristics up to 13 kHz are achieved due to the horn curve and fin structure. The exterior has small scratches, dullness, paint unevenness, etc. (Asaine Tomonori)
Maintenance Information: 2023.8.10 Sound output confirmed
Accessories: none
Main specifications: size W360 x H240 x D300 (when spike is not attached) weight 4.2 kg (measured value)
ALTEC's multi-cell horn designed for theaters, halls, outdoor loudspeakers, etc. The throat is 30166. It's a spectacular visual that anyone who likes will want to look at forever. In addition to the exterior and the platform seat attached, one front stay of the individual on one side is missing, and a feeling of use such as abrasions and dullness can be seen throughout (Kobayashi Hitoshi)
Accessories: none
Main specifications: directivity/horizontal 105°, vertical 60° cell configuration 3 x 5 crossover frequency 500 Hz W770 x H440 x D640 mm approx. 44 kg/book
The price has been reduced. 2023/5/29 sales price 39,800 yen The Altec Green Horn was also used in the initial A7. Even though it has wide diffusion characteristics, it is an attractive horn that is easy to hear and feel the core. There is dullness, scratches, etc. (Goto Daiki)
Accessories: none
Main specifications: Crossover frequency 800Hz compatible driver 802-8D, 806-8A, 807-8A W470 x H220 x D340 mm 4.1 kg
The price has been reduced. 2023/7/25 sales price 39,800 yen The large electric voice horn has a clear, open sound, and you can enjoy the unique three-dimensional effect of vocals, etc. It is a convenient specification that allows a JBL 2-inch screwdriver to be attached. There are line scratches, paint peeling, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: 2 inch radial horn driver mounting part outer diameter 128 mm throat diameter 50 mm screw pitch (diagonal) 102 mm W712 x H334 x D434 mm approx. 3.8 kg
This is JBL's rare 2-inch driver single-throat adapter. If you have 2397 or 2350, don't miss this opportunity. The exterior is dark and there is a lot of feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: W128 x H122 x D100 mm 1.1 kg/book for horn JBL 2350/2355/2397
2 inch horn from JBL. It is made of sturdy, heavy resin. The sound removal is very good, and you can enjoy a sound that won't be lost even when paired with a larger system. You can see the appearance, dullness, abrasions, etc. of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: bi-radial horn recommended crossover frequency 500 Hz cutoff frequency 400 Hz horizontal 90°, vertical 40° throat diameter 5 cm screw pitch (left and right) 122/178/122 mm (up and down) 129/129 mm W445 x H279 x D236 mm 5.0 kg
Product currently on sale. JBL's 2 inch to 1 inch conversion throat. It is an essential item when attaching a screwdriver with a throat diameter of 2.5 cm to a horn with a throat diameter of 5 cm. The appearance is generally good with small scratches (Kobayashi Hitoshi)
Accessories: 6 screws
Main specifications: opening 2 inch side 49 mm 1 inch side 25 mm W120 x H105 mm approx. 0.5 kg
The price has been drastically reduced. 2023/6/25 sales price 15,000 yen This horn was used in Tesco's mid-range speaker system PS-2000H. It was equipped with a 1 inch driver. There are 3 screws for attaching a screwdriver. The Altec 2" driver did not fit. Specs and details are unknown. There are paint drops in places (Murakoshi Yoichi)
Accessories: none
Main Specifications: Mounting screw - screw position 87mm W655 x H232 x D480 mm 7.6 kg
Shorthorn with unknown details. Made of plastic The exterior, the fin of the throat on one side are damaged, and scratches are scattered (Kobayashi Hitoshi)
Accessories: none
Main specifications: opening W400 x 160 mm, throat diameter 100 mm, opening 23 mm, screw pitch 78 mm (2 holes)” 926 g
I think it's probably made by Western Labs. This is a 21A replica horn with the Western logo. It's one size larger than 22A and brings out the best of 555 to the fullest. The curved finish of the Calhoun is also well made. The exterior includes scratches and paint peeling. (TAMURA Eiji)
Accessories: There are no accessories
Main specifications: opening 850 x 755 mm, overall part W850 ✕ H1110 x D720 mm
This is a conversion throat that fits JBL's 1 inch and 2 inch screw holes. The manufacturer is unknown, but it is made of solid metal. There is paint loss on the mounting surface (Murakoshi Yoichi)
Accessories: none
Main specifications: opening 1.5 inch side 51 mm, 1 inch side 38 mm, outer diameter 120 mm, height 50 mm
JBL SELENIUM PRO DRIVER HORN Since it's made of aluminum, it has a good sound and makes a light sound. The installation is also light and the screw type makes it easy to handle. The company's driver D220TI can be mounted. (TAMURA Eiji)
Accessories: There are no accessories
Main specifications: cutoff frequency 1200 Hz throat 1 inch opening dimensions 235 x 125 mm W274 x H164 x D151 mm 0.82 g
1 inch to 2 inch conversion adapter by JBL Professional Grey shrink-coated throats are rare. There is some dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: 1 inch side diameter 102 mm, inner diameter 36 mm, 2 inch side diameter 120 mm, inner diameter 50 mm, height 650 mm
The price has been reduced! The Altec Green Horn was also used in the early A7 at a sales price of 45,000 yen 2023/7/4. Even though it has wide diffusion characteristics, it is an attractive horn that is easy to hear and feel the core. There is a feeling of use such as dullness, scratches, etc. (Asaine Tomonori)
Accessories: none
Main specifications: Crossover frequency 800Hz compatible driver 802-8D, 806-8A, 807-8A W470 x H220 x D340 mm 4.1 kg
It's made of brass and is in stock!! Rare 1505,1803,804 double driver throat If you are looking for one, please take this opportunity to get one! (Murakoshi Yoichi)
Accessories: none
Main specifications: horn side approx. W122 x H95 mm driver side diameter approx. 101 mm horn side screw center distance approx. W108 x H77 mm driver side screw center distance approx. 72 mm
YL Acoustics horn. D-5500 is attached. Details are unknown. It has been deadened (Oikawa Tetsuji)
Accessories: none
Main specifications: W486 x H290 x D400 mm Weight 6.4 kg (actual measurement)
A small horn that can mount the company's 35 series drivers (351/D-3500/D-35000). The 35 series (351/D-3500/D-35000) can be mounted. There are small scratches and dullness (Oikawa Tetsuji)
Accessories: none
Main specifications: cutoff frequency 500 Hz minimum crossover 800 Hz aperture W260 x H130 mm throat diameter 34 mm depth 230 mm dimensions D230 mm mounting part diameter 32 mm mounting depth 10 mm 1.38 kg/book
A good, unused item! It comes with a special stand and original box! Professional “beehive” type acoustic lens. If you combine 375 and 2440, you can enjoy the sense of extrusion that can only be experienced with this horn and the energy of being bathed with your whole body. (SASAKI Shota)
Accessories: original box, special stand
Main specifications: 2 inch driver horn crossover frequency 500 Hz throat diameter 50 mm W343 x H420 x D420 mm 13.6 kg
The price has been reduced! 2023/6/17 sales price 39,800 yen ※ It is cheap because some paint, peeling, etc. are in poor condition. A compact radial horn. A JBL compression driver with a 2.5 cm throat diameter can be attached. It is made of die-cast aluminum, and the outside is coated with the special damping agent Lansa Plus to prevent resonance. The exterior has peeling and some signs of irritation. Serial 17424/17430 (Tamura Eiji)
Accessories: There are no accessories
Main specifications: directivity (horizontal x vertical) 90 x 40 crossover frequency 800 Hz W584 x H140 x D394 mm 9.1 kg
JBL 1-inch driver straight short horn It has been used in various models and is a standard model. Something like glue is stuck (Daiki Goto)
Accessories: none
Main specifications: Directional characteristics 90° (horizontal) 45° (vertical), throat diameter 2.5 cm, crossover frequency 500 Hz or more, horn total length 216 mm, 1.1 kg/1
It is a wood horn that is also mounted on the exclusive masterpiece Model 2401 TWIN. The smooth, warm tone made of maple wood is worth listening to. There are slight scratches, dullness, etc. on the exterior. Serial EB0144 EB0142 (Murakoshi Yoichi)
Accessories: none
Main Specifications: Dispersion Horn Cutoff: 320Hz Throat Diameter: 5cm Material: Japanese Maple Size: W612 x H239 x D410 mm 11.2 kg
The price has been reduced! 2023/6/16 sales price around 378,000 yen is good! Comes with a dedicated stand! Commonly known as the beehive horn, which is deeply popular among enthusiasts. The luster and energy of the mid-range when the 375 is attached is exceptional. The exterior has a feeling of use such as dullness, etc., but it is generally good. Serial 10604 10640 (Asae Tomonori)
Accessories: 2505
Main specifications: crossover 500 Hz, slot diameter, 50 mm, lens diameter, 343 mm, depth dimensions: 400 mm, approx. 15 kg
Unspecified resin horn. Comes with an ALTEC 1-inch screwdriver (Oikawa Tetsuji)
Accessories: none
Main specifications: 1 inch horn W414 x H144 x D225 mm 1 kg (actual measurement)
Disposal prices have been reduced. Member discounts do not apply. 2023/6/11 sales price 198,000 yen side curve diffraction horn using Canadian hard maple, for 2 inches. The natural, moisturizing sound is excellent. As for the exterior, there are cracks, rubbing, and a feeling of use on the top surface (Katsutsugu Hiura)
Main specifications: Canadian hard maple 600 Hz throat diameter 4.9 cm horizontal 90° vertical 40° size: W560 x H240 x D366 mm weight 10 kg
A short horn used in the 43 series. It can also be built into an enclosure, but you can hear good sound even if you attach a screwdriver and place it on top of the enclosure. There is paint peeling on the exterior. Serial 40483/40685 (Yonejima Satoshi)
Accessories: no accessories
Main specifications: 80 degrees horizontal and 45 degrees vertical orientation for 1" drivers Recommended crossover 1.2 kHz baffle opening diameter 108 mm depth 216 mm
FOSTEX compact wood horn. It is scraped from high-density laminated materials of natural Japanese maple. Horizontal radiation angle 110 degrees cutoff 600 Hz Although it is small, it has a careful finish without cutting corners. The exterior is dull, slightly scratched, and has writing (Satoshi Yonejima)
Accessories: none
Main specifications: Radial horn compatible unit FD101 FD100 D100A size W250 x H100 x D211 mm weight 1.9 kg (1 piece)
Disposal prices have been reduced. Member prices are not applicable. 2023/6/4 sales price 178,000 yen A high-rigidity wood horn made by Sano Audio made of solid cherry wood. The unique sound of cherry wood, which sounds solid even when it's hard, is attractive. There are some chips, other dents and small scratches, and paint peeling on the throat part (Oikawa Tetsuji)
Accessories: none
Main Specifications: Expo Neon Thin Horn, Cherry Blossom, Recommended Cross, 650 Hz, Cutoff, 220 Hz, W640 ×
H175 x D331 mm 7.6 kg (actual measurement)
This is a self-made 2-inch screwdriver wood horn with impressive avant-garde colors. With 4 screw holes, JBL 375, 2440, etc. can be mounted (Murakoshi Yoichi)
Accessories: legs
Main specifications: horn opening diameter 307 mm screw pitch (diagonal) 100 mm W307 x H323 x D268 mm
The price has been reduced! 2023/4/30 sales price 29,800 yen A radial horn unit with a cutoff frequency of 330 Hz. It is for 1 inch and can be attached to JBL2410, etc. The exterior is dull, etc., and there is a feeling of use (Asae Tomonori)
Main specifications: recommended crossover frequency 700 Hz or more directivity horizontal 90° vertical 40° throat diameter φ25.4 mm weight 2.6 kg
Bi-radial Horn for JBL 2" Driver Compared to the depth, the large opening makes a light and open sound. There is a feeling of use such as scratches (Daiki Goto)
Accessories: none
Main specifications: bi-radial horn cutoff for 2 inches 400 Hz horizontal 60 degrees vertical 40 degrees throat diameter 5 cm dimensions W445xH279xD236mm weight 2.2 kg (1 piece)
Comes with a dedicated stand! Commonly known as the beehive horn, which is deeply popular among enthusiasts. The luster and energy of the mid-range when the 375 is attached is exceptional. The exterior is dull and paint is peeling (Kobayashi Hitoshi)
Accessories: 2505
Main specifications: crossover 500 Hz, slot diameter, 50 mm, lens diameter, 343 mm, depth dimensions: 400 mm, approx. 15 kg
Comes with a JBL 2" slot A horn made to match Yamaha's JA-6670 and JA-6681. As a matter of fact, Yamaha is well-made. There is an appearance and feeling of use (Hitoshi Kobayashi)
Accessories: none
Main specifications: cutoff frequency 230 Hz W725 x H250 x D580 mm 11.5 kg (actual measurement)
FOSTEX compact wood horn. It is scraped from high-density laminated materials of natural Japanese maple. Horizontal radiation angle 110 degrees cutoff 600 Hz Although it is small, it has a careful finish without cutting corners. There are repairs for appearance, dullness, and bruises (Kobayashi Hitoshi)
Accessories: none
Main specifications: Radial horn compatible unit FD101 FD100 D100A size W250 x H100 x D211 mm weight 1.9 kg (1 piece)
The price has been drastically reduced. 2023/5/17 sales price 148,000 yen. Commonly known as Gold Wing H89+L89 combination. A horn lens composed of a square exponential horn and an acoustic lens with a hyperbolic plate. This is the model used for the famous speaker D30085 Hearts Field. A unique sound from the metal's multi-wing structure blows up. You can see the exterior, dullness, etc. of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: H89+L89 directional characteristics 100 degrees (horizontal) /45 degrees (vertical) throat diameter 5 cm crossover frequency 500 Hz or more lens type Serpentine lens dimensions W505 x H178 x D118 mm Compatible model 375 horn total length 305 mm (horn depth only) acrylic plate W580 x H210 mm 5.6 kg
JBL professional beehive horn It's a unique sound that resonates well, and the piano sound in particular has a wonderful sense of realism, like listening to live music. It is used for high frequency playback of 1.2 kHz or more, but it can be used for high frequencies in 2 to 3 way systems. There is a feeling of use on the exterior, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: crossover frequency 1.2 kHz directivity 90 degrees sound pressure level 109 dB slot diameter 2.5 cm diameter 133 x depth 197 mm 2.7 kg
A rare wood horn made by Yamamoto Sound Crafts. The sound quality and appearance are beautiful, and it is a diffraction horn made with Asada cherry wood made with the company's attention to detail. Fits JBL 1" drivers. There are some abrasions and a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: diffraction horn recommended crossover frequency 800 Hz compatible driver TAD 2001, JBL LE175, LE85, 2420, 2425, 2426, etc. 1 inch driver W448 x H140 x D269 mm 5.6 kg
Disposal prices have been reduced! (Member discounts do not apply) 2023/5/3 sales price 228,000 yen*Inexpensive because paint peeling is conspicuous. Comes with stand 2505! 2 inch horn+lens with huge slant plate It is the size and presence of “ghost horn” as it is nicknamed. The echoes of the exponential horn with an elliptical aperture create a natural sound with no particular peculiar features. The exterior has paint peeling, scratches, and deterioration. Serial 15624/15812 (Kimiya Miura)
Accessories: stand (2505)
Main specifications: crossover frequency 800 Hz, slot diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg/book (stand not included)
The price has been reduced! 2023/5/5 sales price 8,800 yen for 1 bottle only. A compact, lightweight flat front bi-radial horn. It is useful for stabilizing horizontal characteristics and correcting driver characteristics. It is a horn that stretches well in the mid range and makes it difficult to feel loud in the high range (Asae Tomonori)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver 2426 H/J, minimum frequency used, 500 Hz, recommended minimum crossover frequency, 630 Hz, made of high-density polyurethane, W448 x H173 x D174 mm, 1.4 kg
JBL's exponential horn. Since it is a longhorn, it can be used at lower crossover frequencies. It is possible to create highly directional monitor sounds by combining them with acoustic lenses (Murakoshi Yoichi)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses), slot diameter 2.5 cm, diameter 156 x D293 mm, weight 1 kg/book
A high-rigidity wood horn made from Sano Audio made of solid cherry wood. The unique sound of cherry wood, which resonates well even when hard, is attractive (Murakoshi Yoichi)
Accessories: none
Main Specifications: Expo Neon Thin Horn, Cherry Blossom, Recommended Cross, 650 Hz, Cutoff, 220 Hz, W640 ×
H175 x D331 mm 7.6 kg (actual measurement)
The price has been reduced! 2023/2/1 sales price 99,800 yen It seems to be a self-made horn that skillfully imitates the Akasaka Kogei deflection horn PH9005MK2T2. Compatible with JBL/375, 2440, ALTEC/288-16G, etc. Some veneers are peeling off, and peeling and discoloration are noticeable on the throat (Oikawa Tetsuji)
Accessories: none
Main specifications: Recommended crossover frequency: 500 to 8,000 Hz W800 x H126 x D420 mm (horn part) 13.7 kg (actual measurement)