Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please go back and forth on the label side 1 to 2 times (Sasaki Shota)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: manual, power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
1 sheet only Taock audio board It has a 5-layer structure with cast iron sandwiched between MDF and oak veneer attached to the surface material. It can be expected to prevent floor noise and improve sound quality. Dullness and bruising are scattered (Tomoho Asaine)
Accessories: none
Main specifications: MDF main material W500 x D450 x H55 mm 9 kg
1 sheet only This is a Krypton audio board. It contains iron ball sand, which has a large specific gravity, and is excellent at preventing vibration from the device. The sound quality is thick and powerful. There is not a very noticeable scar (Tomonori Asaine)
Accessories: none
Main specifications: size W300 x H55 x D400 mm weight 8.5 kg load capacity 150 kg
An audio board that makes full use of the sounds of natural materials. High-density lumbar core plywood using rubber wood as the base is used. Moabi (Nanyo cherry) wood is used as the surface material used in high-grade furniture. An item that takes resolution, good localization, and a sense of volume in the low range to a higher level. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: load capacity is 100 kg W450 x H30 x D400 mm 4 kg
It is the base for Yamamoto's acoustical crafts, which are highly regarded for their horns and enclosures. The plate-shaped base is made of laminated Asada cherry wood, and can be used not only as an amplifier, but also as a speaker stand. Stability has been improved, and you can enjoy tight sound quality (Hiroki Aso)
Main specifications: thickness: 25 mm; dimensions: 600 x 480 mm; weight: 4.5 kg
Set of 4 African ebony 32mm diameter spike base By itself or in combination with the company's PB-9, it can be placed under a speaker, amplifier, etc., to improve sound quality. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: diameter 32 x thickness 12 mm
Set of 4 African ebony 32mm diameter spike base By itself or in combination with the company's PB-9, it can be placed under a speaker, amplifier, etc., to improve sound quality. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: diameter 32 x thickness 12 mm
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W450 x D500 x H40 mm approx. 7 kg
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W450 x D500 x H40 mm approx. 7 kg
1 sheet only ASK board insulators. Of course, simply placing it under the CD player improves the signal-to-noise ratio and creates tight bass. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W545 × H45 × D445 mm 13 kg
1 sheet only The TAOC Sycamore Sound Creation Board is now in stock. How about it under the feet of tall boy speakers with spikes, which are common these days, and I recommend it to those who want to keep the bass sharp. There is a slight feeling of use on the exterior, but it is relatively good with no conspicuous scratches etc. (Asaine Tomoho)
Accessories: none
Main specifications: melamine veneer, cast iron powder, high-density wood board x 2, 5-layer structure of phenolic laminated board, external dimensions W350 x D450 x H40 mm, weight 5.0 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. The exterior is damaged and dull, and there is a feeling of use due to aging (Tamai Jun)
Maintenance information: 2024.6.15 sound output confirmation maintenance completed (32009 side rotary switch disassembly cleaning exterior/terminal cleaning internal parts fixed row correction waveform confirmation)
Accessories: none
Main specifications: crossover frequency/500 Hz level control/3 position switch 8 ohm size W159 x H153 x D120 mm 2.3 kg