It is inexpensive because it leaves a cigarette smell. This is a carbon record mat. The fine vibrations transmitted from the turntable are reduced, the sense of silence is increased, and the sense of sound image is improved (Sasaki Shota)
Accessories: none
Main specifications: diameter approx. 295 mm, thickness 4 mm
The high-quality textured design of KOJO TECHNOLOGY's “Virtual Earth” top cover with a satin white anodized finish is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in surface area, partial material changes, and S/N improvements, but also improvements in fineness (Sasaki Shota)
Accessories: original box, manual, connection cable
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
HAMILEX speaker stand. Depending on how the connection plate is attached, the width is 330 mm and 300 mm, and installation is possible by changing the direction of height and depth. It's just the right size for a medium sized speaker such as the Yamaha NS-1000M. There is a scratch on the bottom of the exterior (Yonejima Satoshi)
Accessories: No accessories
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Significant sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Tomoho Asaine)
Accessories: none
Main specifications: size 350 x 450 mm height 58 (± 2) mm weight 6.0 kg
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug. The exterior is generally good (Hiroki Aso)
Accessories: original box
By placing this plate between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Hiroki Aso)
Accessories: none
Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
※The spikes are out of stock, so it's cheap. It is an audio isolation board that combines soft materials and hard materials to absorb unnecessary vibrations (resonances). The flat full-band characteristics improve the resolution of all bands and faithfully express subtle sound nuances. There is a feeling of use on the exterior, such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W500 x D450 x H20 mm with 5 cone spike mounting holes on the back.
High sound quality floating board with a combination of special springs and wires. A special coating with high friction is used on the board surface. Sound quality improvements can be expected from all devices such as speakers, record players, and amplifiers. There is a feeling of use such as small scratches scattered around (Asae Tomoho)
Accessories: none
Main specifications: size W375 x H60 x D475 mm weight 6.0 kg (actual measurement)
High sound quality floating board with a combination of special springs and wires. A special coating with high friction is used on the board surface. Sound quality improvements can be expected from all devices such as speakers, record players, and amplifiers. There is a feeling of use, such as small scratches scattered around (Asae Tomoho)
Accessories: none
Main specifications: size W210 x H58 x D297 mm weight 2.2 kg (actual measurement)
※1 sheet only. Perfect for column-type tall boy speakers or bookshelf speakers placed on a stand. Even though the whole thing adheres closely to the floor, the angled edge allows it to spread throughout the room without stopping the sound with the board (Asaine Satoshi Law)
Accessories: none
Main specifications: laminated bamboo, 3 layers, size W330 x H20 x D 380 mm, weight 1.4 kg
J1 Project Isolation Board (small size) It is an ideal board for floor stands for pair tall boy speakers, between small bookshelf speaker stands and speakers, and under small components (Asaine Tomoho)
Accessories: none
Main specifications: 250 x 300 x 20 mm, weight 1.45 kg
A sound control panel that adjusts the sound field by absorbing and scattering sound. Not only can it adjust rooms with sound problems, such as dead rooms, etc., it also has the effect of expanding the sound field space in various rooms. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions: width: 587 x height: 1200 x depth: 29 mm; weight: approx. 5.2 kg/sheet
A sound control panel that adjusts the sound field by absorbing and scattering sound. Not only can it adjust rooms with sound problems, such as dead rooms, etc., it also has the effect of expanding the sound field space in various rooms. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions: width: 587 x height: 1200 x depth: 29 mm; weight: approx. 5.2 kg/sheet
Polymer hybrid damping sheet. A pair hybrid audio board for small speakers composed of a multi-layer structure made of new ceramics and wood-based materials. Please use a pair as a base for small speakers (Tomoho Asaine)
Accessories: none
Main specifications: size W200 x D250 x H11 mm weight 700 g
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole