Choke transformer inductance 15H/0.1A DC resistance 247.3 Ω (actual measurement 245.9 Ω) W63 × H100 × D50 mm 1.2 kg (actual measurement, not including protrusions) Surfaces other than the terminal side are painted gray, and the name plate part is also painted (Kojima Yosuke)
Accessories: none
Power Transformer sold 1 piece Osaka High Wave Power Transformer Primary: 100-110V/3A Secondary: 12-18-20-24V/5A W97 × H81 × D96mm Approximately 3kg (Measured, Not Including Projection) Source Box with (Yosuke Kojima)
Accessories: original box
Heater transformer spare sale primary: 105-115-125V secondary: 6.3V/5A (with CT) W49 × H69 × D45 mm 0.5 kg/piece (actual measurement, not including protrusions) with original box exterior, terminals It seems to be an unused item from the condition! (Kojima Yosuke)
Accessories: original box
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Output transformer sale push pull output 40W primary: 8 kΩ secondary: 4-8-16 Ω W83 x H104 x D 78 mm 2.3 kg/piece There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Output transformer sale push pull output 40W primary: 5KΩ secondary: 4-8-16Ω W84 x H119 x D79 mm 2.3 kg/piece No TANGO badge, there are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
* There is no name plate, but I was able to confirm a slight embossing of the model number on the belt seal on the side. Output: 50W for transparent sale push pull output: 50W primary: 5kΩ secondary: 4/8/16/32Ω use: 6L6, 6CA7, 6GB8, etc. W100 x H115 x D90 mm approx. 3.5 kg/piece, no name plate, and is inexpensive because it has been repainted and written on the entire surface (Kojima Yosuke)
Accessories: none
Output transparent sale push pull output 35W primary: 8kΩ secondary: 4-8-16Ω usage: 7189 app, etc. W82 x H72 x D82 mm approx. 1.6 kg/piece (actual measurement, not including protrusions) The plate is often scratched, printing is erased a lot, and there are paint floats due to rust in places (Kojima Yosuke)
Accessories: none
Choke transformer 0.9 H/260 mA DC resistance 26.8 ohm (actual measurement) choke transformer mounted on A3600, etc. W55 x H71 x D50 mm 0.7 kg (actual measurement, not including protrusions) There are scratches and paint peeling in places (Kojima Yosuke)
Accessories: none
Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
Output transparent pair sale primary: 5 kΩ secondary: 600 Ω CT (150 Split), 6 ohm DC 60 mA output 3 W W85 x H83 x D70 mm 1.7 kg/piece (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
Screwdriver Transpair sale 1st order: 5 kΩ 2nd order: 5 kΩ CT/1.25 ksplit DC30mA 50 to 15 kHz output level 30dBm W76 × H83 × D44mm 0.7 kg (actual measurement, including protrusions) One side with original box seems to be an unused item due to the state of the terminal! (KOJIMA Yosuke)
Accessories: original box
Power transformer primary: 100V secondary: CT-6.3V/3A x 2, 5-6.3V/3A, 350-310-40-0-310-350V/20mA DC200mA W104 x H92 x D88 mm approx. 4 kg (actual measurement, not including protrusions) There are small abrasions and paint peeling in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-117V secondary: 12.6V/1A, 6.3V/2A x 2, 40V/50mA, -10-0-10-130-150V/DC180mA ((VOLTAGE DOUBLER) /AC0.6A (CONTINUOUS)) W100 x H75 x D85 mm approx. 3.4 kg (actual measurement, not including protrusions) There is a lot of floating on the cover rust part (Kojima Yosuke)
Accessories: none
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
It seems to be a Tektron interstage transformer, but detailed specifications are unknown. Pair sale primary: 10 kΩ secondary: 10 kΩ x 2 W80 x H100 x D70 mm 1.4 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none