RCA cable 0.75m switchcraft is an interconnect cable with unknown details where you can see a wrapped wire like a western wire inside the plug shield. An attractive soft sound with soft vocals that don't feel irritating unlike what it looks like. The shield is rolled up at the plug connection (Murakoshi Yoichi)
Maintenance information: 2024.9.9 sound output confirmed
Accessories: none
Unspecified 2-tier rack. Load capacity etc. are also unknown. The bottom plate is just attached with dowels and is not fixed. Please note that if you lift only the top, the bottom plate will come off. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W650 × H344 × D560 mm 32.2 kg
1.3 meter pair of RCA cables The model is unknown because the description is not visible. The exterior is dull, scratched on the plug, and there is a feeling of use such as writing. (ASAINE Tomonori)
Maintenance information: 2024.9.10 continuity confirmed
Accessories: none
Speaker cable 3.0 m pair terminal has not been processed, so the details are unknown. The exterior is dull, and a feeling of use can be seen (Asaine Tomoho)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
Unspecified granite board. It is polished on 5 sides. Use it for amplifiers, CD players, medium speakers, etc. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: none
Main specifications: W453 x H20 x D453 mm 9.4 kg (all actual measurements)
Unspecified granite board. It is a high-weight board with a beveled and mirror finish, which contributes to damping vibrations and tightening sound. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: none
Main specifications: W400 x H30 x 350 mm 11.8 kg (all actual measurements)
※Only 1 speaker cable, 3.0 m, banana-banana terminal specifications are unknown; appearance, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.9.7 continuity confirmed
Accessories: none
Headshell with unknown manufacturer and model number. Simple design (Daiki Goto)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Main specifications: 10.5g dead weight (actual measurement)
Headshell with unknown manufacturer and model number. Simple design (Daiki Goto)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Main specifications: dead weight 10.7 g (actual measurement)
Unspecified headshell. The construction is solid. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Main specifications: dead weight 10.6g
5DIN-RCA cable 0.7 m connection cable for QUAD with unknown details. Since number 3 is L+, number 5 is R+, and number 2 is connected to LR -, it can be used for QUAD input (Takasaki Atsushi)
Maintenance information: 2024.8.30 Continuity confirmed
Accessories: none
Only 1 RCA cable for 0.2 m L only has an exterior, and both plugs are made of THORENS, and a feeling of use such as dullness, scuffs, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
Optical cable 1.5m square-round plug details unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
The details of the 1.2m Sennheiser recable are unknown, but it is a soft cable and easy to handle (Tamura Eiji)
Maintenance information: 2024.8.30 Operation confirmed (sound output confirmed on HD650)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/8/26 sales price 8,000 yen. Unspecified granite board. It also seems good for large amplifiers, analog players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W600 x H45 x D500 mm 36.5 kg (actual measurement)
Front road horn from unknown manufacturer. The bass reflex on both sides is reminiscent of an Onken enclosure, but details are unknown. There are many bruises on the corner surface. A self-made stand is included, but the casters are damaged (Murakoshi Yoichi)
Accessories: saran net, casters
Main specifications: W600 x H839 x D720mm weight 59.2 kg unit opening W345 (maximum) x H202mm screw pitch 380 mm (length/width) 370 mm (oblique)
Mono jack to XLR (male) conversion cable 3.0 m details unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
XLR female to mono jack cable, 3.0 m, unspecified microphone cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
*One jumper plate is missing. 1 pair of unspecified speaker terminals If you've been looking for one, please take this opportunity. Exterior, other than those described above, is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W137 x H81 x D105 mm 112 g (actual measurement)
Unspecified bracket. The previous owner used it on the BOSE 101 MM. You can see the exterior, dullness, and feeling of use of only one car (Kobayashi Hitoshi)
Accessories: none
Main specifications: Mounting part W50 x D110 mm (actual measurement) diameter 110 x H110 mm (actual measurement)
Unspecified bracket. The previous owner used it on the BOSE 101 MM. You can see the exterior, dullness, and feeling of use of only one car (Kobayashi Hitoshi)
Accessories: none
Main specifications: Mounting part W50 x D80 mm (actual measurement) W100 x H160 x D100 mm (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/7/11 sales price 10,000 yen. This is a phase plug for the B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. The degree is generally good (Takasaki Atsushi)
Accessories: none
Main specifications: 227g/piece
Upholstered sound control panel with unknown details. The size is easy to use. There is a feeling of use such as stains (Daiki Goto)
Accessories: none
Main specifications: W650 x H120 x D650 mm, weight 400 g (actual measurement)
The price has been reduced. 2024/6/20 sales price 5,000 yen. Unspecified weight for 3012R. I was able to attach it to the 3012R shaft, but detailed uses are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 86g
Sold 1 bottle EF86/6267 compatible ball, military high reliability tube mesh measurement value 46 (rejected value 33), seems to be made by GEC due to the structure. Comes with a white box ※The measured values indicate GM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
The price has been drastically reduced. 2024/5/22 sales price 30,000 yen A backload type enclosure that can mount a JBL38cm woofer with unknown details. The construction is solid. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W603 x H1100 x D508 mm 40 kg (actual measurement)
Wooden 5-tier rack with casters from unknown manufacturer. The weight is light, and the shelves inside can also be adjusted with dowels, so it seems easy to use. The exterior has scratches, dullness, etc., and signs of use and installation marks (Ryo Mizusaki)
Accessories: none
Main specifications: W580 x H1290 x D470 mm weight 41 kg (actual measurement)
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
XLR female to mono mini jack cable 4.5m unusual combination microphone cable. Can also be used as a normal microphone cable using standard jack conversion (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
Disposal price reduction. 2024/3/22 sales price 20,000 yen Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
The price has been reduced. 2024/3/17 sales price 2,500 yen. An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a finger-pointing split type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
The disposal price has been reduced. Member discounts are not applicable. 2024/2/12 sales price 4,000 yen. Unspecified rosin flux core lead solder 4.0m 40% tin, 60% lead. Recommended for internal wiring of amplifiers (Kobayashi Hitoshi)
Accessories: none
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill, which symbolizes old JBL, is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
Only 1 bottle unopened! Unspecified XLR (male) to XLR (female) relay plug. The exterior is good (Kobayashi Hitoshi)
Maintenance information: unopened, unchecked
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)