Western Sound Ink boost transformer with Langevin's 408B input transformer casing. It has excellent reproducibility and is suitable for both jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: 198 x 103 x 60 mm 1.1 kg
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
Comes with original box. Good needle tip! An original needle! The final model in Shure's pinnacle V15 series. With the amount of information close to the MC produced by the microridge needle tip, the sound cuts through with the goodness of the grain. Please enjoy jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: original box, instruction manual
Main specifications: mm type output voltage 3.0 mV playback frequency range 10 to 25,000 Hz, proper needle pressure 1.5 to 1.75 g (optimal 1.5 g) dead weight 6.6 g
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. There are threads and small scratches (Daiki Goto)
Maintenance information: 2024.6.2 maintained (maintenance contents/TONE and other subsonic, loudness, processor, muting, source direct, power amplifier direct, input selector, tape switch disassembly, polishing grease application, output relay replacement, protector capacitor replacement, each volume, switch cleaning, pin jack polishing, internal inspection and cleaning, running test.)
Accessories: copy of the manual
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (protector circuit capacitor replacement, output relay replacement, phono and pin jack polishing, input selector, etc., switch disassembly polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor switch), each volume, switch cleaning, internal inspection and cleaning, adjustment inspection, operation confirmation, running test)
Accessories: instruction manual (copy)
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 62226 (Yonejima Satoshi)
Maintenance Information: 2024.3.25 Maintained (INPUT DIN 4P replacement, internal Tr, C, R all checks. DIN4P-RCA female cable created. Operation check, pattern solder processing)
Accessories: power cable, connection cable
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
Maintained! Genuine Electri Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. On the exterior, there are parts where oxidation, partial peeling, and light is leaking out. Serial JEB8913 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Maintained (MODE switch disassembly contact polishing contact grease application, installation fixed. Push switch disassembly contact cleaning contact grease application. Other volume contact cleaning. Electrolytic capacitor replacement, panel lamp replacement, panel peeling correction. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Maintained! Comes with a wood case. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and 7 source input selectors, is also attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.13 maintenance completed (each SW/VOL cleaning, pin jack cleaning, panel peeling correction (characters not allowed), lamp deterioration replacement, push button dismantling and cleaning, resistance burning replacement due to film C short in balance loudness board, .regulator IC defect replacement, operation check ※ balance gap cannot be completely removed)
Accessories: instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
The price has been reduced. 2024/5/14 sales price 238,000 yen Maintained. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.14 maintained (each SW, VOL cleaning, push button dismantling and cleaning, companion pot failure → replacement, lamp deterioration → replacement, panel peeling correction (text part is not possible), operation check (the gap cannot be completely removed)
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
The disposal price has been reduced. Member prices are not applicable. 2024/6/4 sales price 498,000 yen upgraded product (green display on display). Jeff Roland's classic preamp. It's a supple, mature expression, and you can also listen to the sound of excellent quality. It is an excellent control amplifier that also has the great advantage of being easy to bring to your own favorite sound with accessories such as cables. There are stains all over the exterior, and there is a scratch on the front corner of the top plate (Kojima Yosuke)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, power cable, connection cable, conversion plug
Main Specifications: Input: XLR×5/Bypass XLR×1 Output: Main Out XLR×1/Record Out XLR×1 Preamp Part: W445 × H80 × D152.5mm 11kg Power Supply Unit: W445 × H38 × D122 mm 3 kg
※1 bottle only. The diaphragm has been replaced with a D8R2421. It is an 8 ohm specification. Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 23890 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. (This is a genuine diaphragm, but it comes with D8R2421)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 8 ohms (3.8 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been drastically reduced! 2024/5/25 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1ohm diaphragm without scratch) DCR (B/6.3ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece
The price has been reduced! 2024/6/1 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been drastically reduced! 2024/5/18 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
Mount adapter compatible with 35mm diameter speaker stands. This adapter is used when mounting speakers that do not have a hole in the bottom (Tetsuji Oikawa)
Main specifications: load capacity approx. 30 kg, stand mount diameter: 35 mm, base thickness: approx. 8 mm
19-inch rack case, carpeted Compared to conventional rack cases, the CPC series uses a sturdy catch lock, corner bracket, and handle, and is spacious yet kept at a low price with a depth of 57.5 cm. It also works great with heavyweight power amplifiers and samplers! There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: size W53.5 cm x H56 cm x D58 cm, weight approx. 23.9 kg (actual measurement)
19-inch rack case, carpeted Compared to conventional rack cases, the CPC series uses a sturdy catch lock, corner bracket, and handle, and is spacious yet kept at a low price with a depth of 57.5 cm. It also works great with heavyweight power amplifiers and samplers! There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: size W53.5 cm x H56 cm x D58 cm, weight approx. 23.9 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 79,800 yen ※It is cheap because the color fades due to sunburn on one side. A classic bookshelf speaker with a small yet firm sense of volume and texture that makes a good impression. It reproduces music without choosing a genre. There is a feeling of use on the exterior due to sunburn, small scratches, etc. (Tamai Jun)
Maintenance information: 2024.5.31 sound output confirmed
Accessories: saran net jumper plate
Main specifications: Playback frequency band 45Hz to 50kHz 8Ω W165 × H280 × D260 mm 6.7 kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/23 sales price 1,380,000 yen*Woofer saran net is out of stock. Limited edition of 500 units commemorating the 40th anniversary of B&W's founding. Not only are diamond tweeters that reproduce extremely clear, natural high frequencies, but their ability to reproduce low frequencies with a sense of volume is also attractive. The low range is well balanced with the mid to high range, and the localization is clear, and it is expressed with a rich sense of color, especially in classical music. As for the exterior, there is a feeling of use such as a line scratch or dullness on the back. Serial 0002291 0002292 (Asaine Tomoho)
Maintenance information: 2022.12.14 manufacturer maintained (tweeter replacement operation test)
Accessories: spike foot jumper sponge hex wrench
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz 8 ohms crossover frequency 3.8 kHz W230 x H930 x D375 mm 25 kg
*Currently sold. Bose's classic full range speaker. This model has a reputation for its well-organized and punchy sound quality. It can be used for a wide range of purposes, from subsystems to surround use. The exterior has a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: full range unit, 6Ω output, sound pressure level 88dB, magnetic-proof type, W270 x H168 x D180 mm, 4k g/unit, MS-2 size, W230 x H47 x D200 mm, 0.65 kg
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: case
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: case