The disposal price has been reduced (member prices are not applicable). 2024/9/6 sales price 298,000 yen Refreshed and maintained, including woofer edge replacement and exterior repairs! The 4425 Mark 2 model features a compact speaker with a large driver horn. The thick, dynamic, and sticky mid/low range in combination with a 30cm woofer and bi-radial horn is a mid-size speaker that truly embodies JBL (Kojima Yosuke)
Maintenance information: 2024.9.6 maintained (woofer edge replacement driver maintenance (magnetic circuit magnetic fluid removal, gap cleaning, center adjustment) ATT cleaning, exterior repair, cleaned)
Accessories: saran net, jumper plate
Main specifications: 2-way 2 speakers, playback frequency band, 35 Hz to 20 kHz, output sound pressure level, 91 dB, impedance 8 ohms, W409 x H635 x D360 mm (including horn part), weight 25.8 kg/unit
The disposal price has been reduced. Member discounts are not applicable. 2024/9/5 sales price 378,000 yen ※There is a blue repair mark on the front baffle on one side, so it's cheap. Maintained. JBL medium studio monitor speaker. A 3-way specification that combines an ultra-high range compression driver. It features clear and powerful sound quality full of transparency. You can enjoy the new-generation JBL sound with a wide range. Serial HA1108-EG0033764 HA1108-EG0033743 (Murakoshi Yoichi)
Maintenance information: 2024.9.4 maintenance (driver maintenance: magnetic circuit magnetic fluid removal/gap cleaning/center adjustment, ATT cleaning, exterior polishing/painting, front baffle touch repair, saran net dowel detachment repair)
Accessories: saran net, jumper
Main specifications: 3-way bookshelf type frequency band 38Hz to 45kHz 6Ω 91 dB W400 × H635 × D335 mm 32.3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/9/12 sales price 398,000 yen Maintenance has been completed. JBL medium studio monitor speaker. A 3-way specification that combines an ultra-high range compression driver. It features clear and powerful sound quality full of transparency. You can enjoy the new-generation JBL sound with a wide range. The exterior is generally good, but some repair marks remain. Serial 01108-22050 01108-22051 (Asaine Tomoho)
Maintenance information: 2024.9.12 Maintained (ATT cleaning, unit detachment, exterior touch-up)
Accessories: saran net jumper plate
Main specifications: 3-way bookshelf type frequency band 38Hz to 45kHz 6Ω 91 dB W400 × H635 × D335 mm 32.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/8/27 sales price 398,000 yen Maintenance has been completed. JBL mid-size studio monitor speaker A 3-way specification that combines an ultra-high range compression driver. It features clear and powerful sound quality full of transparency. You can enjoy the new-generation JBL sound with a wide range. There are no noticeable scratches and it is in good condition (Sasaki Shota)
Maintenance Information: 2024.8.27 Maintained (ATT cleaning, exterior cleaning)
Accessories: manual
Main specifications: 3-way bookshelf type frequency band 38Hz to 45kHz 6Ω 91 dB W400 × H635 × D335 mm 32.3 kg
Disposal price reduction. 2024/2/13 sales price 55,000 yen ※ It has been repainted and is cheap because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: screws
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
We carry out maintenance covering a wide range of areas, from the exterior to the unit! This is the first UREI mid-size speaker to be in stock in a long time. A rare speaker UREI811C equipped with a 38cm coaxial 801B unit with a JBL high frequency driver and horn (2425H+800H) embedded in a 38cm non-corrugation cone manufactured by PAS (Professional Audio Systems). It's a sound with an excellent sense of speed and punch. The open, bouncy low frequencies go well with jazz and dance music. There is a crack repair mark on the SP terminal plate. (YONEJIMA Satoshi)
Maintenance information: 2024.9.21 maintained (exterior repair/full painting, unit maintenance: high frequency side magnetic circuit gap cleaning/center adjustment, network maintenance: frequency characteristic check, ATT cleaning.)
Accessories: No accessories
Main specifications: 2 way 1 speaker, bass reflex system, bookshelf type playback frequency band: 60 to 17,500 Hz (± 3 dB) impedance: 8 ohms maximum input: 120 W output sound pressure level: 99 dB/w/m level control: medium and high frequency variable dimensions W673 x H527 x D483 mm weight 53 kg/1
The disposal price has been reduced. Member prices are not applicable. 2023/8/22 sales price 60,000 yen Overall, the veneer is cheap because there are many peeling, scratches, chips, magic writing, etc. A classically designed Utopian enclosure. A 38cm unit can be mounted. The JBL 2155H was mounted. There are places where the veneer is peeling, scratches, holes in the mesh of the lattice, etc., and devil marks are broken. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: W1060 x H1150 x D700 64 kg (actual measurement)
Transistors, capacitors, and many other parts have been replaced and refreshed and maintained! The highest-end model of yesteryear. By actively replacing deteriorated parts, the sound has become brighter, and the original momentum has been revived. It is particularly compatible with the JBL Lancer series. The exterior is dull, etc., but it has been good since the year it was released. Serial 230060053 (Yonejima Satoshi)
Maintenance information: 2024.9.2 operation confirmed 2024.7.8 maintained (capacitor, transistor, heat dissipation sheet, semi-fixed resistor, fuse replacement. Create an SP terminal. Various SW and VR internal cleaning Clean each board contact. Solder again after removing the old solder. Internal and external cleaning, idle DC offset adjustment. Various inputs and audio output tests have been performed on all SP terminals)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) frequency characteristics 5Hz to 100kHz tone control/bass, midrange, treble 3-stage adjustment W462 x H155 x D316 mm 17.5 kg
Maintained! Pre-main amplifier equipped with a linear-step MC transformer. Supported by SANSUI's traditional strong power supply, it has stable driving power, and the sound is dense in the mid-range. It is compatible with JBL 43 series monitors, and is characterized by strength not found in late SANSUI amplifiers. The exterior is peeling on the side wood veneer corners, and there is a slight feeling of use such as small scratches. Serial 821090015 (Murakoshi Yoichi)
Maintenance information: 2021.3.6 Maintained (main amplifier transistor and output relay replacement, headphone relay replacement, input selector, recalout switch disassembly and polishing, power supply floating resistor replacement, solder repair, each volume, switch cleaning, interior and exterior cleaning inspection, operation confirmation. ※There is a slight roar from the power transformer. There is no effect during the audition, but when there is no sound, you can tell by attaching your ear to the main unit. (The same applies to other models of the same type.)
Accessories: instruction manual (copy)
Main specifications: effective output 120W+120W W463 x H160 x D444 mm 17.7 kg
Network maintenance was carried out in 2015. A 2-way system incorporating JBL's 38cm full-range D130, driver LE175, honeycomb horn HL87, and network N1200 into a self-made enclosure. The style with legs is reminiscent of the company's Baron. A self-made tweeter network (there is a problem where it does not rotate to one of the terminals) is attached to the back, and it can be developed into a 3-way configuration (Murakoshi Yoichi)
Maintenance information: 2015.10.29 Maintained (terminal polishing, cleaning, insulation bush, mounting screw replacement. SW ATT cleaning Bake crack repair. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check)
Accessories: saran net
Main specifications: 2-way bass reflex type D130, LE175+HL87, N1200, self-made NW W x H x Dmm 32.5 kg
The price has been drastically reduced! 2024/9/18 sales price 128,000 yen Maintained in 2023/11! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. ※The power inlet (3P type) has been replaced. The exterior has dullness, abrasions, etc. Serial L6S829 (Yonejima Satoshi)
Maintenance information: 2023.11.24 Maintained (The connection between the AC inlet and AC outlet was reconnected due to disconnection. (I checked the interlocking operation between the power switch and the power amplifier switch.) 2023.10.22 Maintained (replaced due to differences in electrolyte capacitor voltage and capacity due to internal modifications. Replacement was added due to differences in film capacitor capacity and short wiring removed. The balance volume and main volume contacts have been cleaned. Rotary switch, cleaning, tone switch disassembly contact polishing cleaning grease application. Push switch contact cleaning. Input/output operation check)
Accessories: copy of instruction manual, power cord
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/8/31 sales price 128,000 yen Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Tomonori Asaine)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
Maintained! A famous and famous first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. There are line scratches and scuff marks on the exterior. Serial J3Y212 (Tamura Eiji)
Maintenance information: 2024.9.20 Maintained (the DISC1 signal line has an input volume, impedance changeover switch, and input selector switch, and input selector switch have different signal paths from DISC2, so the input volume was exchanged. Impedance switching, input selector cleaned again) 2024.7.27 Maintained (since the HIGH FILTER/LOW FILTER switch cannot be removed, the mounting part was remodeled and replaced. The gap is gone, but there is some switching noise when switching (both HIGE and LOW). (Overall switches are re-cleaned and comprehensively adjusted)
2022.12.25 Maintained (28 film capacitors and 60 transistors in each board were replaced. DISC LEVEL CONTROL CLEANING Other switch and volume cleaning.)
Accessories: copy of instruction manual, power cable
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
The price has been reduced! 2024/9/17 sales price 99,800 yen JBL 38cm cone type full range unit. Unlike modern heavy bass, it reproduces bright and light low frequencies. This is a standard unit that can perform many types of sound makeup depending on the driver and tweeter, which is sharp and adapts well. The exterior has dullness, small scratches, and a small dent on the center cap (Satoshi Yonejima)
Maintenance information: 2024.9.17 sweep test good
Accessories: No accessories
Main specifications: 38cm cone type full range unit Alnico 8Ω 103dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
Straight short horn for JBL 1" drivers. It is a standard horn that has been used in various models. There is dullness and dirt (Oikawa Tetsuji)
Accessories: none
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/6/27 sales price 69,800 yen Maintained! An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. The exterior has a feeling of use such as dullness, small scratches, and peeling paint. Serial 33780 33949 (Hiroki Aso)
Maintenance information: 2024.6.27 Maintained (diaphragm installation adjustment pad, 2 dampers, replacement, distribution terminal, contact part cleaning, 8 insulation bushings, replacement, diaphragm dirt cleaning, DCR (33941/6.2 ohm diaphragm with small scratches)
DCR (33941/6.0 ohm diaphragm without scratches)
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
Maintained! The diaphragm has been replaced with a D16R2421. Standard model of JBL's 1-inch driver unit. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-to-high sound are attractive for slight input
Maintenance information: 2024.7.7 maintained (diaphragm installation adjustment, pad dampener and mounting screw rust replacement, material dirt cleaning, insulation bushing replacement, diaphragm dirt cleaning, diaphragm stain cleaning, diaphragm stain cleaning, diaphragm is likely to be D16R2421, DCR (33380/7.0 ohm diaphragm scratch) DCR (35790/7.0 ohm diaphragm scratch))
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, serial 37658/38816, W145 x D97 mm, 5.1 kg/bottle
Maintained. Standard model of JBL's 1-inch driver unit. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There is tobacco smell and tar stains (Oikawa Tetsuji)
Maintenance information: 2024.7.10 maintained (diaphragm installation adjustment, pad dampener and mounting screw rust replacement, terminal dirt cleaning, insulating bushing replacement, diaphragm dirt cleaning)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, serial 37658/38816, W145 x D97 mm, 5.1 kg/bottle
The disposal price has been reduced! (Member discounts are not applicable) 2024/7/28 sales price 69,800 yen Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. The exterior is dull and there are small scratches. Serial 42932 43349 (Tomonori Asaine)
Maintenance information: 2024.7.28 maintained (vibration diaphragm installation adjustment, pad dampener and screw rust exchange terminal ultrasonic cleaning, insulation bushing replacement diaphragm dirt cleaning)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, serial 37658/38816, W145 x D97 mm, 5.1 kg/bottle
The price has been drastically reduced! 2024/9/15 Sales price 79,800 yen Maintenance completed item! This is the LE8T ferrite model. The bass has more volume than the Alnico type, and although it is small in size, it has an excellent sense of scale. The tone is moist and the vocals are also delicately heard. The exterior condition is dull over time, stains, small scratches, and yellowing on the corn paper. Serial 47126 47624 (Yamato Yuki)
Maintenance information: 2024.9.15 Maintained (center cap replaced, edge replaced)
Accessories: original box
Main specifications: 20cm full range unit, ferrite magnet, 8Ω, playback frequency, 35-15,000 Hz, screw pitch (diagonal), 193 mm, 3.7 kg
The price has dropped drastically. 2018/8/31 sales price 79,800 yen The capacitor has been replaced with a JENTZEN film capacitor! The network used in the L200B. Perfect for 2-way use assuming a JBL 15 inch woofer. It is a rare network with a thick and powerful sound. There are stains and small scratches on the exterior (Wang Zhan)
Maintenance information: Maintained on 2015.7.7 (terminals replaced with banana plug compatible products. The connection part of the input wiring was changed to a gobble. ATT exchange. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check)
2011.7.21 Maintained (capacitor - replacement, silicon bond application, ATT contact check, rivet repair, characteristic check, sound and waveform check, interior cleaning, etc.)
Accessories: none
Main specifications: 8Ω 800Hz 150W mounting opening W91xH98mm screw pitch left and right 111 mm top and bottom 143 mm
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. Serial 33331 33351 (Tomonori Asaine)
Maintenance information: 2024.7.30 maintenance (terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning attenuator SW contact cleaning crossover check)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage, dullness, and paint chips (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, resistance (80 ohm) defect replacement, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior such as line damage and rust (Ryo Mizusaki)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. The exterior has a broken frame on one side, and there is a feeling of use such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screw rust and insulation bushing deterioration replacement, terminal cleaning 155686 GAIN CON SW defect replacement, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
The price has been reduced. 2024/5/22 sales price 12,000 yen. ※It is unclear whether it is a genuine product. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
The disposal price has been reduced! Member prices are not applicable. 2024/9/11 sales price 178,000 yen Maintained! Genuine RF 120V specification (100V operation confirmed) SAE power amplifier synonymous with American sound. The powerful, carefree, and tight sound image is perfect for ROCK and JAZZ. In particular, the dry sound of the bass and drums is truly an American sound. Excellent compatibility with JBL vintage speakers. Dullness, abrasions, etc. can be seen on the exterior. Serial 25-01050 (Yonejima Satoshi)
Maintenance information: 2024.7.13 maintenance completed (board cleaning, resistance, C, transistor failure, deterioration → replacement, operation check, relay contact cleaning)
Accessories: No accessories
Main specifications: output 300W+300W (8Ω) W483 x H188 x D460 mm 25.2 kg
The disposal price has been reduced. Member discounts are not applicable. Maintained! Black panel specification. A model that can be said to be the flagship of Macintosh. It is characterized by its dense, strong sound with a strong sense of extrusion. In particular, the deep sound when combined with JBL's large monitor speakers goes great together. The dynamism in the mid to low range, which is difficult to obtain even with current Mackin power amplifiers, is attractive. Appearance, letters disappear, dullness, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.20 Maintained (MEMTER RANGE, SP switching SW disassembly cleaning, right side meter foggy, dirty polishing and cleaning. meter adjustment. Check the input/output waveform, check the left and right balance, load test, and perform a comprehensive operation test to confirm normal operation)
2024.2.7 Maintained (meter dismantling check OK, aging test ~ if the meter itself is defective, not compatible in the future (pattern cannot be obtained) display lamp, transistor replacement in the meter board, filter replacement)
Accessories: power cord, copy of instruction manual
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
The disposal price has been reduced (member prices are not applicable). 2024/7/25 sales price 1,480,000 yen driver, network maintenance completed! A domestic box model of Paragon's younger brother Metrogon has appeared. The unit configuration is 130A, LE175, H5040, and N1200. When an analog record and a vacuum tube amplifier are connected, an indescribably subdued and tasteful sound spreads. The exterior is entirely glossy, and there are tape marks and bumps (Sasaki Shota)
Maintenance information: 2024.7.25 Maintained (driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: none
Main specifications: 2 way 2 speakers 130A, LE175, H5040, N1200 W1870 x H775 x D630 mm Weight cannot be measured 100 kg or more
Special Feature = CD Era Vacuum Tube Preamplifier/GEC DA30/MOS FET 1 Stone Power Amplifier/82' Audio Technology of the Year/Precision Processing Technology for Players/New JBL Driver 2445J/Large Diameter W Woofer 21 Models/Summary of Published Circuit Diagrams: Technics SU-V7A/HAFLER DH500/S58.3.1 Issued. The photograph is a sample, so the actual product may be broken, written, etc.
The price has been drastically reduced. 2024/8/22 sales price 69,800 yen Maintenance including replacement of 2 block capacitors and replacement of 25 electrolytic capacitors! Comes with a cabinet. An attractive pre-main amplifier with a vintage design. The sharp, crisp, and bright sound makes you get used to jazz and rock in an exhilarating way. It goes well with JBL and ALTEC, and it's just an American sound with a dry atmosphere on the west coast (Sasaki Shota)
Maintenance information: 2024.8.22 Maintained (2 block capacitors replaced, 25 electrolytic capacitors replaced. Transistor migration removal. Each Vol and SW contact cleaning. Replace 4 FOOT felt. Front panel, back panel, volume knob cleaning)
Accessories: none
Main specifications: 25W+25W W360 x H120 x D280 mm 7.5 kg
Maintained! The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. There are stains, scratches, and a feeling of use on the exterior. Serial 9771 9927 (Tomonori Asae)
Maintenance information: 2024.7.30 maintained (terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning attenuator SW contact cleaning crossover check)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
Maintained on 2015.6.11. The graininess of the sound has been clarified, and the smoothness of the connection has also been improved. It is a crossover 1200 Hz network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has paint peeling and stains. Serial 9858/9958 (Miura Kimiya)
Maintenance Information: 2015.6.11 Maintained (terminal polishing, cleaning, insulation bush mounting screw replacement. ATT cleaning. Input/output waveform and balance check, sound output check. (Frequency characteristic measurement check)
Accessories: no accessories
Key Specifications: Crossover 1200Hz 8Ω 3-Position Switch with Level Control
The price has been drastically reduced! 2024/8/30 sales price 118,000 yen Maintained! Rare 16 ohm specification. A 1.2 kHz crossover network used in JBL Metrogons and early Harkness. The company used it when combining a 130A woofer and a 175DLH. *The HF GAIN switches are slightly different on the left and right. There is rust and dirt on the exterior. Serial 501170/ unknown (Tamura Eiji)
Maintenance Information: 2024.8.30 Maintained (attenuator SW contact cleaning. *Please note that the HF gain switches are different on the left and right. Crossover check OK. (Replaced due to enamel resistance burn.)
Accessories: none
Key Specifications: Crossover 1.2kHz 16Ω W159 × H153 × D127 mm 2.2 kg
Maintained! The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. There are stains, scratches, and a feeling of use on the exterior. Serial 15059 15192 (Tomonori Asaine)
Maintenance information: 2024.7.30 maintained (terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning attenuator SW contact cleaning crossover check)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
Maintained! The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. There are stains, scratches, and a feeling of use on the exterior. Serial 15050 15221 (Tomonori Asaine)
Maintenance information: 2024.7.30 maintained (input terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning terminal replacement attenuator SW contact cleaning crossover check)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
Maintained. The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has dullness and scratches due to use over time, serial 18254 18275 (Asaine Satoshi Law)
Maintenance Information: 2024.4.16 Maintained (Screws, Insulated Washer Parts Replacement Switch Contact Cleaning)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
Maintained! JBL's 2-way network. An essential item when adding a tweeter driver to a full range unit such as the D130. The exterior has paint peeling and dullness. Serial 39585 38470 (Tomonori Asaine)
Maintenance Information: 2024.5.16 Maintained (12 Terminal Mounting Screws, 24 Insulating Bushings, Terminal Cleaning, Attenuator, VR Replacement, Crossover Check)
Accessories: none
Main specifications: 2-way network 8 ohm crossover 2,500 Hz W121 × H153 × D93 mm 0.7 kg
Maintained! With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. There is a feeling of use on the exterior such as scratches, threads, and dullness (Mizusaki Ryo)
Maintenance information: 2024.8.11 Maintained (12 terminal terminal mounting screws replaced due to rust, 24 insulating bushings deteriorated and replaced. Terminal dirt ultrasonic cleaning. Replaced the attenuator for VR Gari. (Crossover check OK)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Maintained. With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (terminal replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 7000 Hz check OK)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Maintained! JBL's 8Ω high range network. Can also be used in combination with JBL LE175, LE85/075, and 077, or when combining a full range speaker with a tweeter (Ryo Mizusaki)
Maintenance information: 2024.7.17 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, red terminal defect replacement, attenuator VR dead replacement, crossover check OK)
Key Specifications: 2-way crossover, 8,000 Hz, impedance, 8 ohms, continuously variable level control, no weight 0.9 kg