A self-made EL34PP amplifier using a Tamura transformer is now in stock. I tried playing it together with the TANNOY speaker, and the sound is very powerful, and the sound of the stringed instrument is smooth and comfortable to listen to. Detailed specs are unknown. (SASAKI Shota)
Maintenance information: 2024.9.15 Operation confirmed
Accessories: power cable
Main specifications: EL34PP power amplifier transformer F-2021 x 2, TN-351 x 2, PC-3007 x 1, T-225-5HC x 1 size measurement W485 x H224 x D245 mm (terminals not included)
Self-made enclosure. The woofer opening is about 340 mm in diameter, the horn opening above it is 450 mm x 266 mm, the upper opening is 260 mm x 134 mm, and the tweeter part is about 60 mm in diameter. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: plate thickness 25 mm W800 x H960 x D580 mm 54.1 kg (actual measurement)
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
The price has been reduced. 2020/4/17 Selling price 5,000 yen Unspecified wooden front baffle. If you are a self-made group, come on. There are scratches and stains scattered, uneven painting, corner chips, etc. (Takasaki Atsushi)
Accessories: none
Main specifications: opening diameter 280 mm bass reflex opening W292 × H80 mm W400 × H610 × D20 mm 1.8 kg/sheet
The disposal price has been reduced! Member prices are not applicable. 2022/7/16 selling price 100,000 yen wooden 46cm double woofer type. Baffle opening diameter 425mm Screw pitch 490mm Baffle and enclosure plate thickness 24mm Duct opening diameter 108mm Both the front and back plates cannot be removed. There is a difference in discoloration on the left and right in appearance, and there are corner chips, digging scratches, and dirt stains. (Yutaka Takimoto)
Accessories: none
Main specifications: W1600 × H950 × D850 mm (actual measurement) The weight has not been measured, but it seems that it is 100 kg or more.
Self-made cabinet for GARRARD 301 with double arm specifications. The 3012 Series 2 and SMG-212 were mounted on the tone arm installation port. You can see the appearance, peeling veneer, abrasions, bruises, etc., and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W760 x H265 x D520 mm 14.4 kg (actual measurement)
A large self-made audio board with a sturdy wooden board sandwiched between a floor mat and felt. It was created by the previous owner for TANNOY Westminster. As for the exterior, there is a feeling of use such as scratches on the bottom (Tamai Jun)
Accessories: none
Main specifications: size W1040 x D700 x H23 mm weight 8.0 kg
A 38cm double configuration enclosure that can be used as a center woofer or center speaker. The previous owner had an electro voice 38cm woofer installed. Comes with casters. There is a lot of feeling of use, such as uneven paint and bolt marks on the top plate. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W1045 x H790 x D604 mm 52.2 kg
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
Unspecified 3-way enclosure It is a super bargain price with a considerable feeling of use. For experimentation or research, if you are a self-author with confidence in your arm, how about challenging it? (Yoichi Murakoshi)
Main Specifications: W648 x H967 × D457mm 36.8 Kg (Measurement) Woofer opening diameter 300 mm Scoker opening diameter 173mm tweeter opening diameter 102mm
Self-made enclosure. The previous owner attached a JBL 38cm unit with a 1" driver and used it in 2 ways. It comes with casters. There is a lot of feeling of use, such as uneven paint. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W500×H790×D604mm 53.4 kg
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
The price has been reduced. 2024/1/20 sales price 3,000 yen. 1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
Upholstered sound control panel with unknown details. The size is easy to use. There is a feeling of use such as stains (Daiki Goto)
Accessories: none
Main specifications: W650 x H120 x D650 mm, weight 400 g (actual measurement)
A condenser box incorporating a DEL RITMO oil paper condenser. Please connect between the DAP and headphone amplifier (when playing only by connecting to a volume DAP, the sense of volume of the bass is poor, and only the high frequencies come out quite strong) (Kojima Yosuke)
Accessories: none
Main specifications: 1 analog input/output system each (3.5 mm stereo mini)
Beautiful item with original box! Koizumi Radio Original 1" Driver Horn Throat Set Even though it's small, it has plenty of presence. In combination with a 1 inch driver such as JBL, it seems that you can enjoy powerful and sharp sound. The condition is generally good without much feeling of use, although there is a slight sense of aging (Yamato Yuki)
Accessories: original box
Main specifications: horn dimensions W390xH125xD218mm throat dimensions W90xH82xD60mm 3.4 kg (including throat)
Set of 4 Wood cube setting base made of the hardest African ebony in the world. You can expect significant sound quality improvements. When in use, the sound differs depending on the direction of the wood grain, and when setting, the direction of the wood grain is changed and adjusted so that the sound is the best before use. You can see a feeling of use on the exterior, tape marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: African ebony wood load capacity 50 kg (4 pieces) W34 x D34 x H34 mm approx. 48 g/piece
Set of 4 Wood cube setting base made of the hardest African ebony in the world. You can expect significant sound quality improvements. When in use, the sound differs depending on the direction of the wood grain, and when setting, the direction of the wood grain is changed and adjusted so that the sound is the best before use. In addition to the exterior, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: African ebony wood load capacity 50 kg (4 pieces) W34 x D34 x H34 mm approx. 48 g/piece
The price has been drastically reduced. 2024/5/22 sales price 30,000 yen A backload type enclosure that can mount a JBL38cm woofer with unknown details. The construction is solid. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W603 x H1100 x D508 mm 40 kg (actual measurement)
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2022/11/25 sales price 100,000 yen The TA-4151A enclosure has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it extremely sturdy. The baffle opening is φ296 mm, the unit fastener is made of wood, and the stop screw for the baffle plate is missing. On the exterior, the veneer is peeling off, and there are stains, scratches, and stains. (TAKIMOTO Yutaka)
Accessories: None ※The stop screw on the baffle plate is missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
XLR female to mono jack cable, 3.0 m, unspecified microphone cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.8 continuity confirmed
Accessories: none
The price has been reduced. 2018/3/3 sales price 10,000 yen Technics horn fixing ring. Recommended for self-made people (Oikawa Tetsuji)
Accessories: none
Main specifications: inner circumference diameter 95mm (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/2/12 sales price 4,000 yen. Unspecified rosin flux core lead solder 4.0m 40% tin, 60% lead. Recommended for internal wiring of amplifiers (Kobayashi Hitoshi)
Accessories: none
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/8/26 sales price 8,000 yen. Unspecified granite board. It also seems good for large amplifiers, analog players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W600 x H45 x D500 mm 36.5 kg (actual measurement)
Only 1 bottle unopened! Unspecified XLR (male) to XLR (female) relay plug. The exterior is good (Kobayashi Hitoshi)
Maintenance information: unopened, unchecked
Accessories: none
The price has been drastically reduced. 2020/6/19 sales price 60,000 yen A 38cm Onken (Onken) style enclosure with impressive bass reflex cameras lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. The ALTEC 515B was originally mounted, and it is an enclosure that I would like to assemble with a horn system to make it sound solid. There is quite a feeling of use such as dirt, etc., and there are some broken screws. (TAKASAKI Atsushi)
Main specifications: W800 x H1023 (including casters) x D500 mm, mounting hole diameter: 345 mm, screw pitch (diagonal), 372 mm, width between splints behind the entire baffle 410 mm (actual measurement) 79.6 kg (actual measurement)
Unspecified headshell. The construction is solid. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Main specifications: dead weight 10.6g
The disposal price has been reduced. Member discounts are not applicable. 2024/7/11 sales price 10,000 yen. This is a phase plug for the B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. The degree is generally good (Takasaki Atsushi)
Accessories: none
Main specifications: 227g/piece
Unspecified 2-tier rack. Load capacity etc. are also unknown. The bottom plate is just attached with dowels and is not fixed. Please note that if you lift only the top, the bottom plate will come off. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W650 × H344 × D560 mm 32.2 kg
Disposal price reduction. 2024/3/22 sales price 20,000 yen Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
Headshell with unknown manufacturer and model number. Simple design (Daiki Goto)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Main specifications: dead weight 10.7 g (actual measurement)
Unspecified granite board. It is polished on 5 sides. Use it for amplifiers, CD players, medium speakers, etc. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Main specifications: W453 x H20 x D453 mm 9.4 kg (all actual measurements)
Unspecified granite board. It is a high-weight board with a beveled and mirror finish, which contributes to damping vibrations and tightening sound. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: none
Main specifications: W400 x H30 x 350 mm 11.8 kg (all actual measurements)
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The disposal price has been reduced. Member discounts are not applicable. 2022/8/31 sales price 3,500 yen ※1 bottle only. Speaker stand with unknown manufacturer name, model, etc. There are exterior, abrasions, and dullness (Kobayashi Hitoshi)
Accessories: none
Main specifications: W280 x H270 x D330 mm 4.8 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
Headshell with unknown manufacturer and model number. Simple design (Daiki Goto)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Main specifications: 10.5g dead weight (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2022/10/1 sales price 20,000 yen arm base with unknown details. It is similar to a micro A-1201, etc., but the diameter of the hole is about 19 mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
The price has been reduced. 2024/3/17 sales price 2,500 yen. An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a finger-pointing split type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Unspecified XLR (male) to RCA (female) conversion plug only. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.8.14 Confirmation confirmed
Accessories: none
Main specifications: No. 2 HOT
The disposal price has been reduced! Member prices are not applicable. 2018/10/17 sales price 100,000 yen This is an impressive vintage rack with a western plate. It is about 2 meters tall and can mount 19-inch devices. There are scratches and stains on the exterior. Also, there are some cracks and inclinations in the mount part. (Miura Kimiya)
Accessories: No accessories
Main specifications: 19 inch rack hole pitch 465 mm W535 x H2090 x D660 mm
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill, which symbolizes old JBL, is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg