The disposal price has been reduced. Member discounts are not applicable. 2025/11/19 sales price 398,000 yen Everything from the unit to the network and exterior has been maintained. It is a 612C type with the 604-8H mounted in a well-built enclosure even though the details are unknown. The thick, unsluggish tone centered around the middle range is perfect for vocals. Since localization is also firmly determined, it is a practical and easy-to-use speaker (Kobayashi Hitoshi)
Maintenance information: 2025.11.18 Maintained (unit maintenance: low frequency side viscoid drooping removal/terminal cleaning, high frequency side magnetic circuit rust removal/gap cleaning/center adjustment/terminal cleaning network maintenance: frequency characteristic check/switching SW/ATT cleaning/faston terminal replacement/new wiring) 2010.7.4 maintenance (exterior cleaning)
Accessories: saran net
Main specifications: coaxial 2-way speaker unit 38cm coaxial impedance 8Ω 104dB crossover frequency 1.5kHz dimensions W648 × H750 × D510 mm weight 54.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/11/24 sales price 598,000 yen 2023/1, both exterior and unit have been maintained. The bottom finish is different on the left and right. Mount the 604C green unit to the Altec Consumer No. 1 corner type enclosure! It's a pretty sensible sound that feels like ICONIC! I feel that the balance between the volume and shape of the unit and enclosure, and how to cut the bass reflex is perfect. It's unclear where the enclosure is from, but the finish makes me feel that the hearing test was repeated after actually setting the 604C. In addition to the exterior, peeling of the veneer on one side of the bottom, small scratches, chips, paint deterioration, and lots of cracks on the sides, etc., dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2025.11.23 Operation confirmed 2023.1.6 maintenance (exterior cleaning, repair of peeling part on one side of the bottom. Unit high frequency magnetic circuit gap cleaning center adjustment, single-sided woofer edge crack repair.)
Accessories: none
Main specifications: [604C] 15 inch coaxial 2 way 16 ohm frequency band 30-22000 Hz [N1600A] crossover frequency 1600 Hz W910 x H933 x D614 mm
Unspecified set of 3 metal insulators. Felt with a thickness of about 1 mm is attached to the front and back (permanent future)
Accessories: none
Main specifications: Dimensions: W40 x H20 x D40 mm Weight: 100 g/piece
Set of 4 unspecified wood blocks. How about using it as an insulator (Permanent Miraito)
Accessories: none
Main specifications: W180 x H90 x D320 mm Weight: 3.4 kg/piece
Unspecified metal insulator 3-pair set. Used as a set of spikes and spike receivers. I think it fits small devices (Takahashi Nobuyuki)
Main specifications: spike diameter 20 x height 12 mm, receiving diameter 20 x 5 mm (both measured)
Unspecified set of 7 wood blocks The material is thought to be broad-leaved wood like cherry wood. How about insulators under bookshelf speakers (Takahashi Nobuyuki)
Accessories: none
Main specifications: 33mm square
The price has been reduced. 2025/11/26 sales price 20,000 yen. Unspecified 5-tier rack. The height of the shelf can be adjusted by changing the dowel position. If you've been looking for this size, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: load capacity unknown W610 × H930 × D573 mm 49.4 kg (actual measurement)
The price has been reduced. 2025/11/30 sales price 25,000 yen current sale item. A 20cm full range unit with a structure very similar to Siemens and Isofon frames. Alnico magnets and fixed edges make a light sound (Murakoshi Yoichi)
Maintenance information: 2025.11.22 sound output confirmed
Accessories: none
Main specifications: 20cm diameter (outside) 250mm, depth 96mm
The price has been reduced. 2025/11/26 sales price 5,000 yen. Trio undetailed 30cm woofer. Alnico magnet with reverse rolled edge. There are many stains all over the corn paper (Murakoshi Yoichi)
Maintenance information: 2025.11.16 sound output confirmed
Accessories: none
Main specifications: diameter 315 x depth 163 mm weight 3.5 kg/screw pitch 295 mm (diagonal) 8 ohms
Unspecified stone boards, pair. Only the surface is mirrored. There is a line wound on the top plate (Oikawa Tetsuji)
Accessories: none
Main specifications: W400×H15×D400mm Weight 5.7 kg
Unspecified stone boards, pair. Only the surface is mirrored. There is a corner gap in 1 place (Oikawa Tetsuji)
Accessories: none
Main specifications: W400×H15×D400mm Weight 5.7 kg
※The exterior is all wrapped with butyl rubber, etc., so there is a strong feeling of use, and it is inexpensive. Set of 4 unspecified lead ingots If you've been looking for one, take this opportunity. (KOBAYASHI Hitoshi)
Accessories: none
Main specifications: W150 x H20 x D50 mm 1.36 kg
※The exterior is all wrapped with butyl rubber, etc., so there is a strong feeling of use, and it is inexpensive. Set of 10 unspecified lead ingots. If you were looking for one, please take this opportunity (Kobayashi Hitoshi)
Accessories: none
Main specifications: W295 x H20 x D45 mm 2.42 kg (actual measurement)
Tweeter with small horn similar to SH-18 with YL acoustics. Since there are no plates or model numbers, details are unknown, but band tests of 5000 kHz and up have already been performed. (FUJISAWA KOSHI)
Maintenance information: 2025.12.1 operation confirmed
Accessories: No accessories
Main specifications: Weight 0.8 kg (including the horn part)
The disposal price has been reduced! Member prices are not applicable. 2025/8/13 sales price 8,000 yen mono speaker from unknown manufacturer. The range is narrow, but the sound is narrow and moist. There are bumps and scratches on the exterior (Tamura Eiji)
Maintenance information: 2025.8.13 sweep check OK
Accessories: No accessories
Main specifications: W370 x H300 x D160 mm weight 2.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/7/18 sales price 8,000 yen This is a record player cabinet from an unknown manufacturer. The hole size is 353 mm wide and 323 mm deep. You must drill the arm holes yourself. There are many scratches and screw marks on the exterior. (TAMURA Eiji)
Accessories: No accessories
Main specifications: W520×H260×D421mm
The disposal price has been reduced! (Member prices are not applicable) 2023/9/28 sales price 5,000 yen Wood cabinet for TD-124 from unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: No accessories
Main specifications: W597 ✕ H160 ✕ D445 mm Weight 3.9 kg
The price has been drastically reduced. 2025/11/19 sales price 20,000 yen. Unspecified backload horn enclosure. If you're looking for this size, take this opportunity. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: unit caliber 185 mm W321 x H898 x D450 mm 20.5 kg
Since an insulator of unknown material is attached, it is inexpensive. Set of 6 wooden insulators made of Canadian maple wood with excellent vibration damping. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Accessories: none
Main specifications: W90 x H102 (including deposits) x D90 mm
The sticker is missing, but it seems to be the final audio board. It is extremely heavy and is extremely effective on the speaker base as a countermeasure against vibration. There is dirt on the mat surface (Oikawa Tetsuji)
Main specifications: W500 x H65 x D450 mm approx. 15 kg
The sticker is missing, but it seems to be the final audio board. It is extremely heavy and is extremely effective on the speaker base as a countermeasure against vibration. There is dirt on the mat surface (Oikawa Tetsuji)
Accessories: none
Main specifications: W500 x H65 x D450 mm approx. 15 kg
The sticker is missing, but it seems to be the final audio board. It is extremely heavy and is extremely effective on the speaker base as a countermeasure against vibration. There is dirt on the mat surface (Oikawa Tetsuji)
Main specifications: W500 x H65 x D450 mm approx. 15 kg
The sticker is missing, but it seems to be the final audio board. It is extremely heavy and is extremely effective on the speaker base as a countermeasure against vibration. There is dirt on the mat surface (Oikawa Tetsuji)
Main specifications: W500 x H65 x D450 mm approx. 15 kg
The final audio board. It is extremely heavy and is extremely effective on the speaker base as a countermeasure against vibration. There is dirt on the mat surface (Oikawa Tetsuji)
Main specifications: W500 x H65 x D450 mm approx. 15 kg
Lo-D silver shell Model unknown. It is a simple design with high versatility. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Maintenance information: 2025.11.30 sound output confirmed
Accessories: none
Main specifications: dead weight 5.7 g
A cylindrical magnesium insulator with unknown details. It has an unobtrusive sound and is effective under an amplifier or CD player. A rubber sheet is attached to the bottom, and a feeling of use can be seen on the exterior, such as dullness, scratches, marks, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W40 x H14 mm 34.7 g (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2025/11/5 sales price 55,000 yen*Currently sold. A speaker system incorporating Faital Pro's 16cm full range unit 6Hx150-8 into a self-made enclosure. Bass reflex configuration. The details of the enclosure are unknown, but it is well-built. There is no network, and the capacitors are low cut. If you're looking for this size, take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.11.5 sound output confirmed
Accessories: none
Main specifications: faital PRO 6HX 150-8:15 cm full range 8Ω W320 × H530 × D295 mm 7.8 kg (actual measurement)
The price has been reduced. 2025/11/16 sales price 39,800 yen with 4 shelves ADK's large audio rack. Height can be adjusted with 3 levels at the top and 5 levels at the bottom (30mm pitch). There are dents on the lower front corner, linear stains on each shelf board, and other small scratches. Shipping costs will be estimated separately. In addition to the exterior and attachment of towing equipment with unknown details on the side, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 shelves
Main specifications: load capacity 100 kg W1209 x H726 x D520 mm 62 kg