Pioneer ceramic straight arms. This is a genuine arm for the company's record player, and is also compatible with PL-70L2 and P3a (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: straight arm pipe compatible player PL-7L PL-70L2 P3a, etc.
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product. There is dirt on the exterior (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
A new concept connecting tap equipped with a surge absorber (lightning protection) and noise filter in one package. It has contributed greatly to further improvements in S/N and sharp sound quality that is transparent yet makes you feel dynamic. There are no noticeable scratches on the exterior. Serial 38600KK042 (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: W56 x H35 x D233 mm (including connected outlets) 620 g
Quadra Spire Center Speaker Stand This stand allows you to adjust the angle according to the listening position. As for the exterior, felt is attached to the bottom (Tamura Eiji)
Accessories: No accessories
Main specifications: W375 x H111 x D290 mm
Solid brass machined short pin for RCA terminals. Attach it to the input terminal of an audio device to stabilize the input circuit. The exterior has dullness and light threads (Satoshi Yonejima)
Accessories: original box
Main specifications: set of 8, solid machined brass, 24k gold plated, length 28.5 x diameter 12 mm, weight 12.5 g/piece
Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
TAOC rack underspacer and upper spacer set. If you have a spare or lost one, don't miss it. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Key Specifications: 6 upper spacers, 2 underspacers, 3 cast iron knurled nuts
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. There are scratches and dullness on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
A power supply with approximately 2.5 times the capacity of the power supply built into the GT player. In addition to improving rotation stability, the phono motor's bidirectional servos are used as electronic brakes, and heavyweight turntables stop quickly. There are dents on the exterior, dents on the top plate, rust on the output terminals, dullness throughout, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: Applicable models GT-2000/L/X W135 x H93 x D365 mm, weight 5 kg
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Vibration-absorbing insulators, set of 8, type S with emphasis on vibration absorption, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Asaine Tomoho)
Accessories: none
Main specifications: W20mm×H5mm×D20mm
Special stand for SX-311GY Chic grey finish It is a model that can be used with various medium speakers. Dullness, small scratches, and abrasions due to aging are conspicuous on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W330 x H440 x D294 mm top plate part W267 x D245 mm 5.3 kg
Nagaoka's self-adhesive record cleaner. This self-adhesive record cleaner uses special rubber to remove dust and dirt from the bottom of the sound groove. Dirt on the roller is removed by washing it with water, and it can be used over and over again. The exterior is relatively good (Yonejima Satoshi)
Accessories: storage case
Main specifications: case size W106 x H44 x 100 mm 133 g (including case)
Speaker stand for B&W 805D series Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the goal of suppressing speaker stress by absorbing and releasing it without applying a load due to the diamond formation structure (Daiki Goto)
Accessories: spikes, T-PROP
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The price has been drastically reduced. 2024/5/12 sales price 238,000 yen Accuphase power conditioner. PS-500 upgraded model. The sense of transparency increases, and the way stillness and motion are drawn is more delicate. It is recommended for those who are thinking about upgrading the power supply area. There are dents and stroke marks on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, power cable
Main specifications: rated output capacity 510V (continuous) rated output voltage AC100V±2V rated output current 5.1A output frequency 50/60 Hz (synchronized with input frequency) instantaneous current supply capacity 70A input voltage range AC90 to 110V power consumption at no load 55 W 475 W x 180 H x 394 Dmm 23.8 kg
This is a brass tweeter stand for the company's T900A, T925A, and T90A. The tweeter can be stably placed on top of the speaker system. The exterior has scratches, dullness, etc. (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W65 x H20 x D91 mm weight 471 g (actual measurement)
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
Set of 4 Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W70×D70×H35mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: main body: W350 x H300 x D330 mm 5.2 kg (actual measurement) Top plate: W320 x D300 mm (actual measurement)
HAMILEX speaker stand for small speakers. Recommended for installing small speakers and adjusting the height. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W230 x H150 x D250 mm 2.0 kg total load capacity 20 kg (1 unit)
An item that improves sound quality simply by placing it on the floor between the speakers! The development period is 30 years, so it's worth trying out. For those who are worried about not being able to tune the way they want with just sound-absorbing materials or reflective materials, please go for it. As far as I've tried it at the store, I have the impression that the high range is slightly milder and the middle range is thicker. There are scuffs on the exterior and bottom, but others are good with little feeling of use (Kobayashi Hitoshi)
Accessories: special aluminum case, special cleaner liquid, cloth, instruction manual
Main specifications: diameter 80mm height 58mm 1.1 kg
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: original box
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece