Victor DTS-2 compatible Replacement needle for DTS-2 and STS-2 Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement Cartridge for Multi Record Player TCE-262P Pack of 3 Operation not confirmed. If you have been looking for one, please take this opportunity (Kanai Hidetsugu)
Maintenance information: There is no compatible device and operation has not been confirmed
Accessories: needle cover, instruction manual
The disposal price has been reduced! Member prices are not applicable. 2024/4/13 sales price 128,000 yen Maintained! 800Hz/2 way specification This is the balanced input/output model of the F-15. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. You can adjust the multi-system correctly with clean, clutter-free sound. There are scratches and scratches on the exterior. Serial K8Y452 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 maintained (AC cord, push switch replacement, ATT disassembly cleaning, card edge contact cleaning, crossover characteristic check, interior and exterior cleaning)
Accessories: instruction manual
Main specifications: 2 way/3 way divider input/output RCA/XLR switching type frequency fixed by board W445 x H109 x D373 mm 9.1 kg
The price has been reduced! 2024/4/25 sales price 59,800 yen Maintained! Comes with a cabinet. Accuphase quartz rock synthesizer FM tuner. A pulse tuning system is used that enables manual station selection with the same feeling as the varicone system. You can enjoy sharp and clear sound typical of Accuphase. The exterior has bumps, scratches, etc. Serial JOY347 (Yonejima Satoshi)
Maintenance information: 2024.4.25 Maintained (jumper wire connection due to disconnection of the tuning circuit. System control board corrosion repair pattern check. (Check reception)
Accessories: instruction manual, power cable
Main specifications: synthesizer FM tuner reception frequency 76.1 MHz to 89.9 MHz tuning system quartz rock frequency synthesizer system manual pulse tuning memory 6 stations W445 x H128 (including legs) x D370 mm 8.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 348,000 yen manufacturer maintenance completed! It is a transparent SACD player with a delicate sound. This model has a reputation for its high degree of perfection using a Sony drive. The thickness of the sound. The high level of musicality shines through the excellent balance of each SPEC, such as the high instantaneous power and large sound field space. There are light stains on the exterior and front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 Manufacturer maintained (resistor replacement/characteristic adjustment. Open and close belt open/close switch replacement. (Interior and exterior cleaning, operation/characteristic aging tests, insulation/safety tests completed)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: output balance 1 system, unbalance 1 system dimensions W475 x H151 x D397 mm, weight 17.7 kg
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
The price has been reduced! 2024/4/3 sales price 15,000 yen This is a crossover board crossover frequency of 300 Hz for the F-5/F-15. The damping slope can be changed with an internal switch (Tamura Eiji)
Maintenance information: 2024.4.3 operation confirmed (can be checked with F-15)
Accessories: original box
Main specifications: 300Hz attenuation slope 12dB/18dB switchable
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
The price has been reduced. 2024/4/8 sales price 15,000 yen balance cable 1.5m pair standard AccuPhase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. On the exterior, the cover at the base of the plug is damaged, and there is a feeling of use such as dullness (Hiura Katsuji)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 2-core shield structure, rhodium-plated plug suppresses sound dramatization and reproduces the individuality of the amplifier and player as it is. The plug shell is dull and discolored a lot, and the LR coloring is deteriorated and damaged, so it is inexpensive (Kojima Yosuke)
Accessories: none
Built-in digital input board. Digital music signals from digital devices can be input. Equipped with coaxial and optical fiber input terminals. There is a feeling of use such as dullness. Serial G2Y425 (Takasaki Atsushi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
Main specifications: Sampling frequency 32 kHz to 96 kHz, 24 bit digital input optical, 1 coaxial system, automatic switching between coaxial/optical input, equipped with automatic recognition function for sampling frequency, bit rate, and de-emphasis compatible models C-2000, C-245, CX-260, E-213, E-307, E-308, E-408, E-530, E-550
The disposal price has been reduced! Member prices are not applicable. 2024/4/26 sales price 148,000 yen Maintained! Although it is a line-only preamp, it also has a total of 8 input systems, so it is convenient for using multiple devices such as CD players. Also, the CD input is equipped with a dedicated buffer amplifier and volume, so you can feel the attention to detail in this model. The exterior has bumps, scratches, etc. Serial J7Y818 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 Maintained (replaced due to offset volume disconnection and poor contact. Due to poor contact with the push switch inside the sealing door, polishing grease was applied to the disassembly contact. The main volume and CD volume contacts have been cleaned. The power circuit capacitor has been replaced. Each input/output operation was checked.)
Accessories: No accessories
Main specifications: line preamplifier, CD dedicated buffer amplifier, CD dedicated input balanced/unbalanced 1 system each, line input 5 systems, 1 output balance system, 2 unbalanced systems, W475 x H135 x D373 mm, 11 kg
The price has been reduced! 2024/4/3 sales price 15,000 yen A rare 1,400Hz frequency board is in stock! It seems to be an Accuphase special order item. A crossover board that can be used for the F-5/F-15. The damping slope can be changed with an internal switch (Tamura Eiji)
Maintenance information: 2024.4.3 operation confirmed (can be checked with F-15)
Accessories: No accessories
Main specifications: 1400 Hz attenuation slope 12 dB/18 dB switchable
Includes remote control and wood cabinet! A moderately good synthesizer FM tuner. It is a high-performance tuner with high resolution and excellent operability, and allows you to listen to elegant and imposing sounds just like the luxurious exterior stored in a wood cabinet (Sasaki Shota)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: wired remote control, copy of manual, power cable
Main specifications: reception frequency 76.1 MHz to 89.9 MHz power consumption 25 W dimensions W466 x H188 x D391 mm weight 14.1 kg
Maintained by Accuphase Service! A core power amplifier representing the Accuphase in the mid-80s. Neat sound design, just like Accuphase. A highly complete car that harmonizes high resolution and thickness in an exquisite balance. It is a famous model that was used as a reference power amplifier for various FM magazines at the time. There are scratches on the side corner and front (Sasaki Shota)
Maintenance information: 2024.4.27 Maintained by the manufacturer (due to poor output relay contacts, both A/B were replaced with sealed types. Front, push button switch contact cleaning. Level volume left and right disassembly contact cleaning. (The meter and logo lamp were replaced, the carbon resistance in the power amplifier Ass'y was exchanged left and right, and internal inspection and cleaning characteristics were checked)
Accessories: manual
Main specifications: output 250 W+250 W (8 ohms) frequency characteristics 20 Hz to 20,000 Hz gain 28.0 dB load impedance 2 to 16 ohms damping factor 500 W 481 x H218 x D445 mm weight 33.5 kg
The 2.5m banana conductor at the end of the speaker cable is a PCOCC-A Acoliba single-wire cable. An air insulation structure that was only used in hundreds of thousands of high-end cables. This cable has high cost performance. There is a feeling of use such as friction on the sheath (Asae Tomoho)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
*Only one speaker cable, 2.5 m, and the unprocessed conductor at the end is a PCOCC-A Acoliba single-wire cable. An air insulation structure that was only used in hundreds of thousands of high-end cables. This cable has high cost performance. There is a feeling of use such as friction on the sheath (Jun Tamai)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Y lug plug set of 4 have mirror-polished terminal contact parts made of leadless brass material with excellent conductivity, and rhodium plating treatment has been applied to the surface to further improve conductivity and durability (Tamura Eiji)
Accessories: original box, instruction manual
Since it is said that electrode resonance is attenuated and rectified by combining multiple different materials such as phosphor bronze, brass, aerospace-spec aluminum alloy, and natural smoky quartz as materials, it seems that the effect can be realized if you try it by attaching a clean power source to an outlet, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 37 mm, cover length 63 mm
Power cable 2.0m POWER MAX series high CP cable PCOCC-A conductor is used with a 3.5 scare copper foil shield, tourmaline sheath, carbon CSF tube, etc. and are built without compromise (Hiura Katsuji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
It is a Schumann resonance wave (7.83 Hz) generator that increases the S/N ratio by canceling electromagnetic waves etc. generated from the entire audio equipment. To use it, power the included AC adapter from an electrical outlet and place the main unit as high as possible in the room (1 m 50 cm or more). There is no noticeable damage to the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Operation confirmed (power can be turned on, effect not measured)
Accessories: power cable
Main specifications: Schumann resonance wave (7.83 Hz) generator input voltage 12V W140 × D170 × H50 mm 220 g
The speaker cable uses an untreated single-wire PC-Triplec conductor at the end of the 1.0m pair. It has a carefree, straight sound, and the sound pressure feeling as if the amplifier's output has increased is attractive. There are abrasions and whitening on the sheath ※Since it's a single wire, handling is difficult (Kojima Yosuke)
Accessories: none
PSE standard product ACROLINK POWER CONNECTOR Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
Only 1.0 m 1 balance cable uses technology introduced into the 7N-A2070, and is a thick rhodium plated plug that uses a stress-free 6N copper conductor. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Only one speaker cable, 1.8 m, untreated 6N copper at the end, is stress-free, and has straightforward sound quality. Although it is a thick cable, it is flexible and easy to handle (Daiki Goto)
Maintenance information: 2024.3.4 confirmed
Accessories: none
The 0.8 m pair end of the speaker cable uses a new polymer polyolefin material with an excellent low dielectric constant of about 1/4 compared to untreated PVC. Using a cab tire structure, you can hear a neutral sound that is strong against disturbance noise and has a sense of stability. There is rubbing dirt on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable 0.7 m pair with unprocessed 6N stress-free cable and electromagnetic wave absorption non-magnetic thread. This cable has a natural, smooth sound quality with a wide range, and does not choose a genre (Ryo Mizusaki)
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Good level! Caster specification! ADK 4-tier rack. Natural wood and essential aluminum materials are used, and the design is also high. The main body frame and inner plate are prevented from vibrating with special material spacers. (FUJISAWA KOSHI)
Main specifications: 180mm, 180mm, 230mm from the top of the 4-tier rack post, W600 x H775 x D450 mm, approx. 16 kg
A 5-tier rack made of full-body solid natural wood with beautiful Asahi wood processing. We use 30mm thick solid natural wood for the top plate and bottom plate, and 25mm thick for the shelf board. The generous load capacity of 100 kg for the top plate, 50 kg for the middle shelf, and 150 kg for the bottom plate is unique to ADK, which has a sturdy structure. There is a slight scuff on the top plate. (Yamato Yuki)
Accessories: none
Main specifications: load capacity 100 kg, height adjustable with 3 shelves, 3 upper shelves, 5 lower steps (30mm pitch) dimensions W619 x H861 x D520 mm weight 41 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. It also has good efficiency, so it's easy to play, and it features a chic design with a shiny mirror piano paint. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
Vacuum tube CD players are rarely in stock. It looks like a product manufactured in Germany and the Netherlands based on the MarantzCD-4000 package, and you can comfortably listen to the mild sound quality unique to tube balls and the gorgeous high frequencies that pop out. This is a great item for those who want an accent to the sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440 x H90 x D270 mm weight 3.82 kg
LAN cable 1.0m AIM audio LAN cable The amount of information is suitable for a high-end machine, and the high resolution and good freshness are attractive (Yonejima Satoshi)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
The price has been drastically reduced! 2024/4/20 sales price 69,800 yen This is the first arrival at the A100BT5.0 Hi-Fi Hall, the top model of the company's A80. The color is red high gloss with a luxurious high-gloss finish. The sound is very loud and has an extruding effect. There are plenty of input/output interfaces, and the wired USB is compatible with optical digital input, analog audio input, subwoofer output, and Bluetooth with aptX, a high-quality sound codec using the Qualcomm Bluetooth v5.0 chipset, making it easy to use. There are no noticeable scratches on the exterior. Serial 496000712560 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, power cord, connection cord
Main specifications: DAC built-in active speaker output 40W x 2 input (digital) USB/Optical/Bluetooth (analog) RCA size W160 x H283 x D255 mm weight 5.5 kg
*Currently sold. It's an inexpensive yet powerful amplifier. The model, which combines stable operation and abundant power, has a good sense of dynamism in the sound, and it feels like it comes to the fore. The input is equipped with an unbalanced RCA pin and a balanced TRS phone. You can see a feeling of use on the exterior, marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: power cable
Main specifications: 45W+45W (8Ω) bridge output 150W (8Ω) W480 × H99 × D260 mm 6.8 kg
*Currently sold. There is a gap in the right VOL, which is the current situation. It's an inexpensive yet powerful amplifier. The model, which combines stable operation and abundant power, has a good sense of dynamism in the sound, and it feels like it comes to the fore. The input is equipped with an unbalanced RCA pin and a balanced TRS phone. A feeling of use can be seen on the exterior, marks, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: power cable
Main specifications: 45W+45W (8Ω) bridge output 150W (8Ω) W480 × H99 × D260 mm 6.8 kg
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 6,500 yen. Internal Wiring Cable 2.0m Alpha Internal Wiring Cable It is a single-ply and popular black enamel (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
The interior has been completely overhauled! This is an 811A push-pull tube power amplifier. You can enjoy an overhanging vacuum tube sound with luxurious mono specifications where the woofer is properly braked. The thick, cored sound in the low range makes you feel the momentum and strength unrivaled for a vacuum tube. The entire exterior has scratches and dullness over time (Sasaki Shota)
Maintenance information: 2024.4.26 Maintained (vacuum tube 5R4GY strain and deterioration replacement. 1W resistor distortion and deterioration replacement. 25W resistance deterioration and pair replacement. Vacuum tube 6W6 deterioration replacement/vacuum tube 6SN7 defective replacement. Block capacitors 40 μF x 2 made in Japan → replaced with CE ones. 1 x 2 Vacuum Tube Socket and RCA Jack Caulking Repair Rated output: 85 to 120 W with AC 100 to 117 V, measured at SP: 8 ohms)
Accessories: none
Main specifications: vacuum tube 811A x 4, 5R4GY x 8, 6W6GTB x 4, 6SN7GTB x 2, 12AX7 x 2, 165W+165W W482 x H272 x D310 mm
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. As for the exterior, the cork around the frame has deteriorated (Mizusaki Ryo)
Maintenance information: 2024.4.28 Maintained (edge holes repaired with rubber adhesive, edge wood chips removed, center cap removed and dustproof net glued, magnetic circuit slit cleaned, rust prevention, coil bobbin center removal)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
ALTEC monitor speaker system. The unit configuration is similar to CARMEL. The mid-low range, which has a sense of volume like CARMEL, is slightly thin, but you can enjoy the sharp Altec sound. There is an attenuator gap, but there is no problem playing music (Daiki Goto)
Maintenance information: 2024.4.30 The exterior bottom has been repaired and painted
Accessories: none
Main specifications: 2-way 3-speaker unit configuration/802-8T, 414-16B x 2, N-800-F dimensions W788 x H610 x D488 mm weight 43 kg/book
The price has been reduced! 2020/11/9 sales price 70,000 yen maintenance completed. This is a 2-way network. Since bass can be pushed out well, and high frequency adjustment ranges can be obtained with 2 types of HF/MF attenuators, it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to the feeling of use. Serial 05234 07210 (Makoto Kono)
Maintenance information: 2020.11.9 maintained (common wiring reinforcement terminal solder removal, rust removal treatment, cleaning, ATT (x4) contact disassembly cleaning, contact grease application, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound check)
Accessories: none
Main specifications: W114 x H190 x D228 mm 1.8 kg Crossover frequency 1.2 kHz Impedance 8 ohms Level control is continuously variable up to -8 dB in the middle range is 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz