Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
※Since there are 3 missing corners, it is inexpensive. Sorbothane Square Insulators, Set of 4, Black Type When vibration is cut with sorbocaine, a phenomenon occurs where low frequencies clearly and dynamically come out of the speaker itself. The exterior is dull, etc., and there is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: size 30 mm square height 10 mm
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
The price has been drastically reduced! 2024/4/25 sales price 198,000 yen Manufacturer maintained! Tubular premain amplifier equipped with 300B. In addition to combining a vacuum tube with a modern design, it is easy to use with easy bias adjustment. Since it can also be used as a power amplifier using the PRE-IN terminal, it is also recommended for those considering separating them in the future. Serial 05050050 (Hiroki Aso)
Maintenance information: 2024.4.25 Maintained (maintenance including restoration of the contact point of the selector polishing volume ※ vacuum tubes can still be used, but they have deteriorated appropriately over time, so please understand that this is a current product)
Accessories: power cable
Main specifications: maximum output 18W+18W (8Ω) vacuum tube 300B/A grade push-pull input terminal input RCA4 system
(4 rear systems, 1 tape out system) output terminals 6/8/16 ohm, 1 system each, TRIODE original 300B power consumption 220W size 440 x depth 320 x height 200 mm weight 20 kg
※1 bottle only. TOA large metal radial horn. In terms of sound quality, it has a narrower impression than Altec's sectional horn 311, but it has a bright sound with a sense of overhang unique to radial horns. *The diameter of the mounting hole seems to be slightly smaller than ALTEC, so there is a possibility that ALTEC's 1.5-inch drivers will not fit depending on individual differences. Overall, there are wounds, dullness, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: cross 500 Hz or more, horizontal 90 degrees, vertical 40 degrees, throat diameter 35.5 mm, compatible driver HFD-651, width 720 mm, height 220 mm, depth 580 mm, 10.9 kg
A 6cm full range is mounted in an enclosure that reproduces JBL's masterpiece Paragon in a small size. The back road horn and rear leg height can be adjusted, so it's quite elaborate (Murakoshi Yoichi)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: 6cm full range, 8Ω, W527 x H160 x D145 mm, 2.4 kg
Comes with original box! This model is a new reference for Technics' direct drive turntable systems. Stable rotation and reduced vibration are achieved by adopting a coreless direct drive motor. Please enjoy the moment of interacting with music through the rich sound of analog records with this model. On the exterior, the rubber mat is dull. Serial GF1FA0010072021 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: instruction manual, power cord, connection cord, original box, turntable seat, dust cover, auxiliary weight, shell, overhang gauge, cartridge mounting screw set, turntable mounting screw set
Main specifications: Direct drive turntable system (manual) rotation speed 33/45/78 rotation speed adjustment range ± 8/± 16% universal S-shaped tone arm static balance arm effective length 230 mm overhang 15 mm arm height adjustment range 0 to 6 mm needle pressure adjustment range 0 to 4 g (needle pressure direct reading type) 453 x H173 x D372 mm 18 kg
*Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: original box spike base
Main specifications: Gradation cast iron, matte black finish, diameter 60 x height 45 mm, weight 800 g/piece, plate diameter 35 x height 5 mm
*Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: spike base
Main specifications: Gradation cast iron, matte black finish, diameter 60 x height 45 mm, weight 800 g/piece, plate diameter 35 x height 5 mm
SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm height 7 mm weight 47 g (actual measurement)
SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm height 7 mm weight 47 g (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. Current belt drive player model for the 2024/4/19 sales price 478,000 yen project. The company's commitment is packed with everything from the 9.5 kg aluminum alloy platter and selected ultra-low noise synchronous motors to neodymium magnetic floating feet. Equipped with Ortphone's popular dynamic balance arm RS-309D! (MURAKOSHI Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: instruction manual, stabilizer, power cord, head shell, mounting screws, template, needle pressure gauge, dust cover, EP adapter, gloves
Main specifications: belt drive, compatible with 33, 45, 78 rotations, RS-309D: long arm needle pressure 0 to 5 g, cartridge weight 18 to 40 g (including shell), effective length 326 mm, effective length 311 mm, overhang 15 mm, height adjustment range 42 to 55 mm, W550 x H250 x 450 mm, 22 kg
※Since it is cheap, it will be handed over as is. A coaxial 2-way speaker that can be enjoyed using sound reflected from the ceiling with a structure directed diagonally upward. You can enjoy playback with Dolby Atmos by adding enabled speakers as height channels based on conventional 5.1 channel and 7.1 channel speaker systems. It can also be used by installing it on a floor-standing speaker such as the company's D-509E. There are scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.24 sweep check OK
Accessories: saran net
Main specifications: sealed coaxial 2-way speaker 6 ohm 83.5dB 70Hz-38kHz W142 x H136.5 x D238.5 2.2 kg
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. There is dullness and dirt (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/22 sales price 148,000 yen Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. The paint is peeling off. Serial 32769, 32799 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 maintained (diaphragm installation adjustment, pad dampener replacement)
Accessories: No accessories
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
The price has been reduced. 2023/9/6 sales price 1,000 yen. J1 Project hybrid spike base. Only 1 of the 3-piece set is unopened (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: label
Main specifications: hybrid spike base polymer composite FAR561+ stainless steel saucer diameter 35 mm x height 15 mm maximum load weight 174 kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
A dedicated insulator developed for the company's CD player Njoe Tjoeb. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: 50 mm in diameter, 25 mm in height (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
A 5-tier rack made of full-body solid natural wood with beautiful Asahi wood processing. We use 30mm thick solid natural wood for the top plate and bottom plate, and 25mm thick for the shelf board. The generous load capacity of 100 kg for the top plate, 50 kg for the middle shelf, and 150 kg for the bottom plate is unique to ADK, which has a sturdy structure. There is a slight scuff on the top plate. (Yamato Yuki)
Accessories: none
Main specifications: load capacity 100 kg, height adjustable with 3 shelves, 3 upper shelves, 5 lower steps (30mm pitch) dimensions W619 x H861 x D520 mm weight 41 kg