The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
Sold 1 bottle 12AU7 compatible sphere smooth plate measurement value 106 (rejection value 56) The printing with the white box has almost disappeared, but it was determined that it was an ECC82 made in Yugoslavia from the structure*The measured value represents the gm value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: main body: W350 x H300 x D330 mm 5.2 kg (actual measurement) Top plate: W320 x D300 mm (actual measurement)
Prices have been reduced. 2022/11/25 sales price 100,000 yen The enclosure for TA-4151A has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it heavyweight and very sturdy. The baffle opening is φ296 mm, the unit fasteners are made of wood, and the locking screws for the baffle plate are missing. The exterior has peeling veneer and stains. (TAKIMOTO Yutaka)
Accessories: None*Baffle plate locking screw missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
A passive attenuator that uses DALE NS-2B, a non-inductive wire winding resistor. The input impedance is 10 kΩ, and the maximum attenuation is possible to approximately -58 dB. The 23-contact VOL can be attenuated at approximately -2.5 dB. It has a careful finish that focuses on solid aluminum knobs, internal wiring, and even each part. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: W112 x H68 x D155 mm (including knob terminals)
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
1 bottle sold CV4085/6267 compatible ball mesh shield code: 8Y5 L2B measurement value 56 (rejection value 33) all the prints with the white box have disappeared, but it was determined to be EF86 based on the structure and code ※ The measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
Unspecified set of 2 wood blocks 30mm square insulator cube It is similar to Yamamoto Sound Crafts's QB-1, but it is smaller than the QB-1 and the details are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Main specifications: W30 x H30 x D30 mm 28.6 g (actual measurement)
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
*1 bottle only Speaker stand with unknown details such as manufacturer name and model. There are appearance, abrasions, and dullness (Hitoshi Kobayashi)
Accessories: none
Main specifications: W280 × H270 × D330 mm 4.8 kg (actual measurement)
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
XLR female to mono mini jack cable 4.5m unusual combination microphone cable. Can also be used as a normal microphone cable using standard jack conversion (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/13 sales price 30,000 yen model number, convenient for small amplifiers, etc. such as unspecified steel satin finish audio racks, spike specification LINN products, etc. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size W395 x H540 x D395 mm shelf board 350 x 350 mm between shelves 105 mm weight 11.7 kg (actual measurement)
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
Only 1 speaker cable uses a new conductor that is a hybrid of 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end of the 1.35 m end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Only 1 speaker cable uses a new conductor by hybridizing 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
The 1.19m pair end of the speaker cable uses a new conductor that is a hybrid of 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCu. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Genuine YAMAHA, genuine replacement needle for CG-8100 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Genuine replacement needle for YAMAHA CG-6900 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
A power supply with approximately 2.5 times the capacity of the power supply built into the GT player. In addition to improving rotation stability, the phono motor's bidirectional servos are used as electronic brakes, and heavyweight turntables stop quickly. There are dents on the exterior, dents on the top plate, rust on the output terminals, dullness throughout, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: Applicable models GT-2000/L/X W135 x H93 x D365 mm, weight 5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/10 sales price 69,800 yen Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: output 45W+45W (8Ω, Class B operation) 10W+10W (8Ω, Class A operation) 20Hz-20kHz power consumption rating 190W maximum 300W external dimensions 436 x H144 x D323 mm weight 13.5 kg
YAMAHA's heavyweight premain amplifier. The low frequency with good damping by a good power transformer and the clear sound typical of YAMAHA are attractive. The PHONO input is equipped with MC, making it a great specification for analog fans. The pre-main part can be separated, and there is potential for development into a separate part. There are a lot of front panel stains on the exterior. There is deterioration on the back side of the wood panel (Sasaki Shota)
Maintenance information: 2024.5.11 Maintained (right amplifier power circuit fault repair. Soldering correction in each circuit, including the left and right main amplifiers. Disassemble the switch and polish the contacts and apply contact cleaner. Bad output relay contact replacement. Knob installation correction. (I/O pin jack polish)
Accessories: copy of the manual
Main specifications: 130W+130W (8Ω) 150W+150W (6Ω) PHONO (MM/MC) pre-main separable W473 x H169 x D464 mm 26 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. The exterior has scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
Full maintenance, such as internal and external maintenance, was carried out, and the finish was beautiful! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. Serial 55553L, 55553R (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (exterior repair/repaint) 2017.4.25 Maintained (exterior polishing/all coated woofer cone paper/unit frame paint chip putty repair grill dent correction/paint tweeter distortion and maintenance (edge deformation repair, magnetic circuit slit maintenance complete) unit detachment terminal replacement (banana plug compatible product) ATT cleaning capacitor replacement*Some capacitors before replacement Since it is difficult to remove, remove the wiring to check the remaining input/output waveform and balance, sound output check, frequency characteristic measurement check (~ 42 kHz)
Accessories: No accessories
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
The disposal price has been reduced! Member prices are not applicable. 2024/5/10 sales price 148,000 yen Maintained by Yamaha Service! Yamaha's separate AV power amplifier. It is an authentic AV amplifier that is very careful about the detailed mid-high range, and the thickness and sound quality of the mid and low frequencies. There are scratches on the exterior. Serial Y027223VX (Fujisawa Yukishi)
Maintenance information: 2024.5.10 manufacturer maintained (output relay replaced. Input sheet (input pin jack, balance/unbalance changeover switch, circuit board), CPU sheet (cannon input connector, balance/unbalance changeover switch, circuit board) deterioration replacement, operation check, sound output test)
Accessories: instruction manual, power cord, original box
Main specifications: 75W W435 x H210 x D463.5 mm 25.4 kg