Speaker cable, 8.5 m pair terminal, banana - QED 40th anniversary model, cylindrical 6-core structure, has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Key Specifications: Comments in progress
※There is a tear in the coating at the base of the terminal, so it's cheap! Speaker cable 5.0 m pair terminal banana QED 40th anniversary model cylindrical 6-core structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
A 5-tier rack made of full-body solid natural wood with beautiful Asahi wood processing. We use 30mm thick solid natural wood for the top plate and bottom plate, and 25mm thick for the shelf board. The generous load capacity of 100 kg for the top plate, 50 kg for the middle shelf, and 150 kg for the bottom plate is unique to ADK, which has a sturdy structure. There is a slight scuff on the top plate. (Yamato Yuki)
Accessories: none
Main specifications: load capacity 100 kg, height adjustable with 3 shelves, 3 upper shelves, 5 lower steps (30mm pitch) dimensions W619 x H861 x D520 mm weight 41 kg
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
Speaker cable 1.0m pair terminal banana QED 40th anniversary model. The 6-core cylindrical structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Set of 4 speaker stands Block type can be installed either vertically or horizontally. It is a very convenient and useful item for installing medium sized speakers, etc. There is a feeling of use on the exterior, such as dullness or peeling of the outer sticker ※ There is content like sand inside (Asaine Tomoho)
Accessories: none
Main specifications: Scythe W110 x H190 x D390 mm weight 6.6 kg (actual measurement)
Speaker cable 1.0m pair terminal banana QED 40th anniversary model cylindrical 6-core structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
GE Valirella mono cartridge for SP I made a sound at the store, but the sound is so clear and powerful that I can't even imagine from my age. There is dullness over time and a feeling of use (Yamato Yuki)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
For the 5.2+6.2 m pair of untreated conductors for the speaker cable, 4 types of materials with excellent sound, mainly high-purity 6NCU, were selected. The deep low frequencies and dynamic playback sound are attractive. There is friction and dirt on the sheath (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
RCA cable, 1.3 m pair, PCCC-A conductor, this cable is particular about component procurement and precision processing in Japan. Overwhelmingly clear sound quality can be obtained, and cost performance is excellent. There are abrasions on the sheath (Asae Tomoho)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance even when combined with various woofers and tweeters. The exterior has a feeling of use such as dullness, small scratches, and abrasions (Asaine Tomoho)
Maintenance information: 2024.4.28 Maintained (diaphragm installation adjustment
Replace the following parts DCR (no scratches on the 164164/6.3 ohm diaphragm)
DCR (63913/6.4.ohm diaphragm, no scratches))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Unspecified silver shell. The exterior has dullness, abrasions, etc., and there is a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: dead weight 12g (actual measurement)
※The cantilever is slightly leaning to the left, so it is inexpensive. The first stereo cartridge in the Empire lineup. The sound is perfect for the 6th to 70s editions where you can feel the core clearly (Yamato Yuki)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
We generously use 3 types of luxurious high-purity materials, starting with the 1.2 m pair of RCA cables, pure silver coated OFC. Designed to go all the way to the tip of the terminal. This is a cable with a high degree of perfection that cannot be enjoyed in this class. There is an appearance, dullness, and a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
*Currently sold, this is DENON's long-selling 390 series 4th generation premain amplifier. Recommended for desktops and those with limited size. A classic model that is small yet thick in the mid-range, and has a steady sound. The exterior has a feeling of use over time, such as yellowing and dullness caused by tar. Serial 3111503497 (Tomonori Asaine)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: instruction manual copy remote control
Main specifications: 50W+50W (8Ω) PHONO (MM) W434 × H121 × D338 mm 7.0 kg
Maintained! You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. The exterior has a feeling of use, such as dullness and paint peeling. Serial 10904 10896 (Hiroki Aso)
Maintenance information: 2024.4.27 Maintained (center cap replacement, corn paper coating, edge damping agent applied)
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
Interior and exterior maintenance completed! English studio monitor with TANNOY HPD385 installed. It's deep and you can feel that the scale is wide, and the size is clean, so the room's layout will expand. The exterior has been beautifully finished due to maintenance (Tomoho Asaine)
Maintenance information: 2024.4.27 Maintained (exterior cleaning/repair
Saran net replacement unit maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, fastener polishing) unit detachment network maintenance frequency characteristic check ATT cleaning high range capacitor replacement (3.3 uf, 4.8 uf) 4 pin terminal contact cleaning)
Accessories: none
Main specifications: size W510xH769xD380mm weight 32.2 kg (actual measurement)
Phono equalizer developed for the SHURE V15 series. Sound loss is good, and the medium sound is solid. Perfect for jazz from the late 60's to 70's. There are small scratches, dullness, etc. on the exterior. Serial 870900123 (Tomonori Asaine)
Maintenance information: 2024.4.27 Operation confirmed
Main specifications: 120V specification PHONO-FLAT-TAPE switching W145 x D105 x H65 mm
※It is cheap because it is in poor condition. Denon's MC cartridge used to be an introduction machine. The sound quality has a sense of transparency that extends smoothly from low to high frequencies without clogging. The famous DL-103 Yuzuri cartridge has a good balance of range, density, and volume. In addition to being dull on the exterior, there is a feeling of use such as the part number plate peeling off. Serial 6984 (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.3 mV internal impedance 40 ohms needle pressure 1.5 to 2.1 g special elliptical needle double structure tapered cantilever dead weight 4.5 g
An early SHURE camemo mark MM type cartridge. The mid-range push is strong and the sound quality is crisp and dry. In addition to being dull on the exterior, the needle tip is slightly to the right (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: MM output voltage 5 mV needle pressure 1.5 to 3.0 g dead weight approx. 6 g
Audio-Technica Shell Keeper, commonly known as Tri-Capsule. 3 can be stored with the headshell attached (Asaine Tomoho)
Accessories: none
Main specifications: W152 x H88 x D50 mm 120 g
It features a bright and tense American sound. This cartridge also has the same resolution as an MC cartridge, and is suitable for JAZZ and ROCK systems. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: needle tip 0.3 x 0.7 mil oval needle pressure 0.75 to 1.5 g
GOLDRING MM Cartridges The output voltage is high, easy to use, and the sound is rich in color and satisfying to listen to. The exterior has a feeling of use, such as dullness on the body (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: original box case
Main specifications: GYGER2 diamond needle model MM type 6.5 mV needle pressure 1.5 to 2.5 g (proper needle pressure 1.75 g) dead weight 6.3 g
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The needle tip is slightly turned to the right (Tomonori Asae)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. The exterior has a feeling of use such as dullness. Serial 1226 (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
white collar! Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. The exterior is dull and there is a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping weight 8.2 g
It is a headshell that combines magnesium alloy with anti-vibration material. Overhang and left/right tilt can be adjusted (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: magnesium alloy Q dump dead weight 10.2 g
Unspecified head shell. It is similar to the Technics SH-98D. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. In addition to the exterior and finger tips being straight, you can also see a feeling of use such as dullness (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 9g
Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. The exterior is dull and there is a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping weight 8.2 g
Center spindle oil for TECHNICS SP-10MK2. Lubricating 2-3 drops once every 2000 hours is sufficiently effective (Asaine Tomoho)
Accessories: original box
The company's standard grade cable uses high-purity OFC (oxygen-free copper/4N) as the 1.0 m pair of RCA cables as OAI7 conductors to achieve transparent sound. Recommended for the first step in cable tuning (Tomoho Asae)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
RCA cable, 1.0 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. There is a feeling of use such as dullness on the exterior (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
RCA cable, 1.0 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. There is a feeling of use such as dullness on the exterior (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
RCA cable, 0.5 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. In addition to dullness on the exterior, there is a feeling of use, such as the lettering on the sheath being slightly thinner (Asae Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Comes with a stroboscope! Turntable seat made of butyl rubber and tungsten. Achieves clear, cloudy playback sound. It also has an excellent effect on preventing vinyl records from slipping. The exterior has slight stains, dullness, etc. and a feeling of use (Tomoho Asaine)
Accessories: none
Audio-Technica Shell Keeper, commonly known as Tri-Capsule. 3 bottles can be stored with the headshell attached (Asaine Tomoho)
Accessories: none
Main specifications: W152 x H88 x D50 mm 120 g
Power cable, 1.5 m, high purity, 3 scare, high quality 3-core shielded power cable, a model that boasts performance that exceeds the preconceived notions of 6NCU+OFC hybrid entry models (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Hamilex speaker stand Not only is the small speaker, but it also has a sturdy construction with a load capacity of 50 kg. There is a feeling of use on the exterior due to small scratches etc. (Tomoho Asae)
Accessories: none
Main specifications: load capacity approx. 50 kg, top plate W200 x D240 mm, overall W240 x H450 x D300 mm, weight 4 kg/1 unit
Audio-Technica headshell A lightweight aluminum headshell that is both easy to use and has high sound quality. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
Main specifications: aluminum dead weight 10g