Maintained in February 2020. It is a power amplifier whose strength of 400W+400W can also be seen from the exterior. Enough power with a sense of extrusion that comes close to the front and the ease and carefree sound are attractive. There are threads and dullness on the exterior. Serial 002321 (Tamura Eiji)
Maintenance information: 2020.2.22 maintained (according to the check, RCA operation failure, earth float → earth processing failure, power stage Tn x 1 characteristic failure, driver stage Tn characteristics poor (both channels), coupling and bypass C, etc. deterioration → replacement, meter lamp replacement, diode short present → replacement ~ operation check)
Accessories: none
Main specifications: 400W+400W Dimensions W483 x H178 x D400 mm Weight 26.4 kg
The price has been reduced! 2026/3/5 sales price 49,800 yen ※It is cheap because it has oxidation and rust. A representative model of Saek, using a double knife edge. It has a reputation for clear sound and accurate sound image localization, and is still popular today. The exterior is rust-resistant and oxidized. (YONEJIMA Satoshi)
Maintenance information: 2026.3.5 operation confirmed
Accessories: phono cable
Main specifications: double knife edge static balance universal type, total length 329 mm, effective length 240 mm, overhang 5 mm, needle pressure 0 to 2 g
Speaker cable, 3.0 m pair end, Y lug on one side, OFC conductor, uses internal wiring material from the GX103 speaker system. If you have a Fostex speaker, don't miss it (Tomonori Asae)
Maintenance information: 2026.3.16 continuity confirmed
Accessories: none
The price has been drastically reduced! 2026/3/9 sales price 128,000 yen 2025/12 maintenance completed! Dinaco tube preamp. An American sound with an outstanding crisp, dry tone and a slight sense of extrusion. There is a lot of feeling of use on the exterior front panel, such as dullness, stains, corrosion, scuffs, etc. (Asae Tomoho)
Maintenance information: 2025.12.10 Maintained (switch contact cleaning, contact grease application. Vacuum tube socket replacement, retighten power switch knob, check input/output operation)
Accessories: none
Main specifications: Rectifier tube 12x4 12AX7 x 4 PHONO1 system line system 3 system tape system 1 system pre-out 1 system W335 x H100 x D220 mm
A plug that converts a standard stereo plug to a stereo mini jack. Convenient for connecting headphones and portable devices (Tomonori Asae)
Accessories: none
It's cheap because it doesn't have a label. A heavyweight arm stabilizer that doubles as a mounting nut for the company's WE-308 series and WE-407/23 tone arms. It is effective for damping low frequencies, improving signal-to-noise, and improving howling. There is dullness, scratches, and corrosion (Daiki Goto)
Accessories: none
Main specifications: Measured body weight: 495 g; diameter: approx. 50 mm; height: approx. 48 mm
Genuine weights for PD-171, 171A, PD-151 If you are looking for one, by all means (Tomonori Asae)
Accessories: none
Main specifications: 142g actual measurement
Pioneer perforated headshell Carbon fiber molding The shell is lightweight, has just the right length on the finger, and is easy to use. There is an appearance and a feeling of use (Tomonori Asae)
Maintenance information: 2026.3.2 continuity confirmed
Accessories: none
Main specifications: dead weight 8.7g
The price has been reduced! 2026/2/8 sales price 5,000 yen This is Sony's professional vocal dynamic microphone. There are stains all over the exterior (Tomoho Asae)
Maintenance information: 2026.2.8 sound output confirmed
Accessories: Connection cable (general purpose) holder
Main specifications: frequency characteristics 80 Hz to 13,000 Hz output impedance 200 ohms
The price has been reduced! 2026/2/8 sales price 5,000 yen This is Sony's professional vocal dynamic microphone. There are stains all over the exterior (Tomoho Asae)
Maintenance information: 2026.2.8 sound output confirmed
Accessories: Connection cable (general purpose) holder
Main specifications: frequency characteristics 80 Hz to 13,000 Hz output impedance 200 ohms
The disposal price has been reduced! (Member prices are not applicable) 2025/2/28 sales price 5,000 yen. Self-made cabinets equipped with SP-10 double arm specifications 3009S2IMP and UA-7 were mounted. The exterior has a feeling of use over time (Tomoho Asae)
Accessories: none
Main specifications: 7 kg (actual measurement)
It is a sturdy headshell made by pressing aluminum. The exterior is dull and has old scars. (MATSUMOTO Tsuyoshi)
Maintenance information: 2026.2.1 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
This is a turntable sheet with unknown details. Both sides are treated with suede, which feels moist to the touch and provides a firm grip, preventing the record from slipping and rattling. There is a slight thread on the exterior (Tomonori Asae)
Accessories: none
Main specifications: diameter 292 mm, weight approx. 75 g (actual measurement)
Unspecified machined aluminum EP adapter. It's a convenient item to have for listening to singles. There is a feeling of use such as dullness (Tomoho Asae)
Accessories: none
Unspecified EP adapter. Made of plastic. It's a convenient item to have for listening to singles. There is a feeling of use such as dullness (Tomoho Asae)
Accessories: none
※The remaining amount is about 30% to 40%. Audio-Technica aerosol-type record cleaner. The antistatic effect protects records from dust. Move about 20 cm away from the record, spray evenly, and wipe off with a commercially available dry record cleaner before use. There is rust on the metal part (Tomoho Asae)
Accessories: none
It is inexpensive because it has oxidation. Unspecified machined aluminum EP adapter. It's a convenient item to have for listening to singles. There is a feeling of use such as dullness (Tomoho Asae)
Accessories: none
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Unspecified machined aluminum EP adapter. It's a convenient item to have for listening to singles. There is a feeling of use such as dullness (Tomoho Asae)
Accessories: none
Maintained! The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. There are stains, scratches, and a feeling of use on the exterior. Serial 9771 9927 (Tomonori Asae)
Maintenance information: 2024.7.30 maintained (terminal terminal mounting screw rust and bushing deterioration replacement terminal ultrasonic cleaning attenuator SW contact cleaning crossover check)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg