The price has been reduced! 2024/3/22 sales price 200 yen ※PSE standard product! This is a standard type of wall outlet. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.3.22 continuity confirmed
Accessories: none
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/10/12 sales price 500 yen D terminal cable 1.0m titanium-containing sheath suppresses vibration and achieves high image quality. The exterior has a light feeling of use (Tomonori Asae)
Maintenance information: 2023.10.12 continuity confirmed
Accessories: original box
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.5 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※Only one speaker cable is a 3.0-meter untreated parallel type that is easy to use, and the conductor is a basic type of high-purity OFC cable made by twisting 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. There is a feeling of use of kusumi etc. (Jun Tamai)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/5 sales price 500 yen The sound quality of only one 2.0m QED speaker cable feels thick and flexible throughout the entire range. You can use it regardless of genre. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
Super sapphire needle for Rectany Ronette type LP It has been opened, but since there is no target cartridge, operation has not been confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
The price has been reduced! 2024/4/5 sales price 500 yen The QED speaker cable 1.0m pair sound quality feels thick and flexible throughout the entire range. You can use it regardless of genre. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.6 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Replacement needle compatible with National EPS-19ST Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Unspecified XLR (male) to RCA (female) conversion plug only. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.8.14 Confirmation confirmed
Accessories: none
Main specifications: No. 2 HOT
OTTO ST-7D stylus For MG8, MGT-2, and MGT42K It seems unused, but it's junk because the needle hasn't come out of the body due to deterioration of the damper. Please use it as a parts remover. There is dullness on the exterior ※ member prices are not applicable and there is no guarantee for junk items, and they are sold as is (Kobayashi Hitoshi)
Maintenance information: Operation unconfirmed (the cantilever has sunk due to damper deterioration. (As for junk items, they will be handed over as is.)
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2023/2/5 sales price 2,000 yen. *Currently sold. Specification details of only one Onkyo full range unit are unknown, but it was able to sweep and make sound. The exterior has dirt, dullness, and tape marks (Katsuji Hiura)
Maintenance information: 2023.2.5 sound output confirmed
Accessories: none
Main specifications: diameter 120 mm, depth 71 mm, screw pitch 219 mm (actual measurement), weight 1.2 kg
An introductory cable with 1.5 m pair untreated ends that are soft and easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
The price has been drastically reduced. 2023/9/28 sales price 700 yen. *Unopened item I opened it for photography. XLR cable 1.5m1 interconnect cable with the notation OFC AUDIO. XLR12C (male) - XLR311C (female) RoHS compliant (Hiura Katsuji)
Maintenance information: 2023.9.28 continuity confirmed
Accessories: none
※1 bottle only. Speaker cable 2.0m is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and features a tight sound (Murakoshi Yoichi)
Maintenance information: 2024.3.29 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.0 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
※A standard cable with only 1 speaker cable that has become synonymous with 2.0m end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. It is a cable with thickness and a sense of extrusion in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
Speaker cable This is an audio-technica home theater speaker cable with an unprocessed 3.0 m end. It's only for home theaters, so it's good to tune the sound field and sense of realism (Kobayashi Hitoshi)
Maintenance information: 2024.3.9 continuity confirmed
Accessories: none
This is a replacement needle compatible with the Technics MM cartridge EPC-05STA. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Speaker cable 1.4+2.9 m pair end This is a well-balanced speaker cable, from powerful, unprocessed bass to delicate light sounds. There is a feeling of use such as dirt (Asae Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
Replacement needle for Sony VL-14GS (2) ND-14G compatible Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been drastically reduced. 2023/4/28 sales price 1,000 yen. ※1 bottle only. Jack Jack Cable 2.0m Studio and Stage Professional Cable There is no habit, and the tone is straightforward (Takasaki Atsushi)
Maintenance information: 2023.4.28 Conductivity confirmed
Accessories: none
The price has been reduced. 2021/12/19 sales price 1,000 yen. ※There was a sound, but details such as characteristics have not been checked. Dynamic microphone made in China with standard specifications. How about an easy way to use it for a wide range of purposes other than vocals? Total body length 165 cm, 210 g (Murakoshi Yoichi)
Maintenance information: 2021.11.28 sound output confirmed
Accessories: none
Genuine Hitachi, genuine replacement needle for IFS-240 The cantilever is slightly turned to the left. Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
※1 XLR cable 1.5m male phone jack plug is made by Neutrick and is originally a microphone cable, so sound removal is good. There is an appearance, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
Main specifications: Electromagnetic shielded microphone cable, 4 cores, outer diameter: 6.0 mm
common needle. Compatible cartridges are Victor DT-59, ONKYO DN-68ST, etc. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VX-50G Since there is no main unit, it has not been checked, and it is the current situation (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Disposal prices have been reduced! (Member discounts are not applicable) 2022/5/18 sales price 2,000 yen When used between an S-terminal AV noise filter device and a display, unnecessary noise is removed without deteriorating the amount of information or high frequency characteristics of the video signal at all, and the video signal is organized. The exterior is dull and dirty, and there are floating marks on the label. (TAMURA Eiji)
Maintenance Information: 2022.5.18 Continuity Confirmed
Accessories: There are no accessories
Replacement needle for Sony VM-32G This is an ND-134G compatible needle. Operation has not been confirmed since there is no main unit (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
S terminal cable 1.3 m wire/PCCC+Hi-OFC hybrid conductor titanium compound+rheostoma sheath There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
SONY ND-138G equivalent Replacement needle for VL-38G It has been opened, but since there is no target cartridge, operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Compatible with the Nagaoka N-30. Replacement needle compatible with V-30 and T-30 cartridges. There is no main unit and operation has not been confirmed (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Speaker cable with 1.7 m pair ends using unprocessed OFC. This cable is simple and easy to handle. There is a feeling of use throughout (Murakoshi Yoichi)
Maintenance Information: 2023.9.5 Conductivity Confirmed
Accessories: none
Equivalent to the Hitachi DS-5T. Replacement needles for HRD-100 and HRD-101 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: none