Audio-Technica CD lens cleaner It's probably unused, but the amount of liquid in the cleaning solution has decreased quite a bit (Kobayashi Hitoshi)
Accessories: case, cleaning liquid (trace amount)
A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. There is color fading due to sunburn (Tomoho Asaine)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
A record stabilizer that can be used properly with an LP/EP board on the front and back. An EP adapter can be attached (Daiki Goto)
Accessories: none
Main specifications: zinc alloy diameter 70×H35mm 710g
※The disc stabilizer and suction unit are missing and only the plate is cheap. Please use it as a heavy turntable. There is deterioration in sealing rubber (Oikawa Tetsuji)
Accessories: none
Main specifications: diameter 305 mm height 10 mm weight 1 kg
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
Set of 8 Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior is dull and oxidized over time, the color fades on the label, and the anti-vibration rubber deteriorates (Asae Satoshi Law)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
The disposal price has been reduced! Member prices are not applicable. 2025/12/15 sales price 5,000 yen*The disc stabilizer and suction unit are out of stock and only the plate is cheap. Please use it as a heavy turntable. There is deterioration in the sealing rubber. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: diameter 305 mm height 10 mm weight 1 kg
Jewel tone headshell It's very similar to Audio-Technica's MG-10. The overhang can be adjusted by positioning the mounting screws (Murakoshi Yoichi)
Maintenance information: 2025.12.28 continuity confirmed
Accessories: none
Main specifications: dead weight 9g (actual measurement)
※Cleaning liquid is not included. Record cleaner using directional velvet with high cleaning effect. Follow the direction of the arrow that appears and wipe the record. A special sponge structure keeps moisture by putting cleaning liquid into the handle. The velvet surface is wide and easy to use. There is a feeling of use such as dullness on the exterior as a whole (Asaine Tomoho)
Accessories: none
※Inexpensive because it is a cleaner only. This is a wet cleaner for records only. A wide type that can wipe down the surface of an LP record. There is a feeling of use (Tomoho Asaine)
Accessories: none
※The remaining amount is about 30% to 40%. Audio-Technica aerosol-type record cleaner. The antistatic effect protects records from dust. Move about 20 cm away from the record, spray evenly, and wipe off with a commercially available dry record cleaner before use. There is rust on the metal part (Tomoho Asae)
Accessories: none
*Set of 2. Audio-Technica metal insulators. It is a compact tuning base that can be used not only as a speaker, but also on an amplifier or CD player. There are places where it is dull and the lettering has disappeared (Oikawa Tetsuji)
Accessories: none
Main specifications: diameter 36 mm thickness 5 mm weight 22 g per piece
*Set of 3. Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. It is a safe design that prevents slipping even with light equipment (Oikawa Tetsuji)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
※1 piece only. Insulators using special rubber with excellent anti-vibration properties. Hannenite is used to effectively absorb unwanted vibrations. There is dullness and a feeling of use (Oikawa Tetsuji)
Accessories: none
Main specifications: load capacity approx. 20 kg per piece, diameter 36 x H9.5 mm, weight 9 g/piece
The price has been reduced! 2026/1/8 sales price 1,000 yen*Cleaning liquid and tray are not included. Record cleaner with a wet and dry 2-split structure. Oriented velvet is used, and the cleaning effect is excellent. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W118 x H43 x D57 mm
The price has been reduced! 2026/1/19 sales price 4,000 yen*Lead wire is out of stock. It is a highly rigid shell just like Audio-Technica. It appears to be an accessory to the AT-1007. The 2-piece structure makes it easy to adjust the overhang. (FUJISAWA KOSHI)
Maintenance information: 2026.1.19 continuity confirmed
Accessories: No accessories
Main specifications: aluminum press, dead weight 6g
The remaining amount of cleaning solution is about 60%. This is a set of a directional velvet brush with high cleaning performance and a cleaning solution that suppresses static electricity. You can see a feeling of use such as dullness on the exterior (Asaine Tomoho)
Accessories: cleaning liquid (AT634)
This headshell is a combination of magnesium alloy and anti-vibration material. The overhang and left/right tilt can be adjusted. The exterior is dull (Murakoshi Yoichi)
Maintenance information: 2026.1.24 continuity confirmed
Accessories: none
Main specifications: magnesium alloy dead weight 10.2 g
Lightweight shell made by Audio-Technica. Perfect for sounding high compliance cartridges. There is a feeling of use on the exterior, such as dullness and friction on the mounting part (Takahashi Nobuyuki)
Maintenance information: 2026.1.31 continuity confirmed
Accessories: none
Main specifications: light alloy press processing dead weight 8.5 g
Currently sold. A compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.2.1 operation confirmed
Accessories: AC adapter
Main specifications: W70 x H30 x D92 mm 160 g
Audio-Technica VM cartridge current model. Uses a bonded round needle with stable tracing performance (Murakoshi Yoichi)
Maintenance information: 2026.1.24 sound output confirmed
Accessories: needle cover
Main specifications: VM type 20 to 20,000 Hz 4.0 mV needle pressure 1.8 to 2.2 g dead weight 6.1 g
This cartridge features a clear VM sound with a wide separation and low distortion ratio. The exterior has an overall feeling of use and dullness. (YONEJIMA Satoshi)
Maintenance information: 2026.2.10 Operation confirmed
Accessories: No accessories
Main specifications: VM type output voltage 5 mV/1 kHz needle pressure 1.5 to 2.5 g dead weight 6 g