This pan lock is used when storing an amplifier in a wooden case. The models that can be used are not known here, so please carefully check the target product to be used before purchasing. Exterior, paint peeling, rust, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: hole pitch 77 mm, rail length 143 mm, body size W33 x H106 x D325 mm (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/5/6 sales price 7000 yen TOPPING USB isolator. This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
The price has been reduced. 2021/5/6 sales price 7,000 yen turntable seat for Garrard 301. The condition is not very good, such as slight undulations and wrinkles. (KONDO HIROTSUGU)
Accessories: original case
The disposal price has been reduced. Member discounts are not applicable. 2024/8/26 sales price 8,000 yen. Unspecified granite board. It also seems good for large amplifiers, analog players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W600 x H45 x D500 mm 36.5 kg (actual measurement)
The price has been reduced. 2018/3/3 sales price 10,000 yen Technics horn fixing ring. Recommended for self-made people (Oikawa Tetsuji)
Accessories: none
Main specifications: inner circumference diameter 95mm (actual measurement)
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
The price has been reduced. 2024/9/8 sales price 7,000 yen. *9V/2.0A specification. An audio file-standard DC power adapter that uses “Active Noise Cancellation +,” which uses military radar technology. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.6 continuity confirmed
Accessories: original box, connector
Main specifications: Approx. 150g (actual measurement)
Variable Resistor Attenuator Bridge T Type 21 Steps Maximum Attenuation 50 dB Impedance 600 Ohms W45 x 64 mm 140 g with Volume Knob (Kojima Yosuke)
Accessories: volume knob (attached to the main unit)
Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki)
Accessories: None
Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg
*Set of 3 A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as scratches (Daiki Goto)
Accessories: none
Main specifications: Gradation cast iron matte black finish diameter 60 x height 45 mm weight 800 g/piece plate/diameter 35 x height 5 mm
*Set of 3 A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as scratches (Daiki Goto)
Accessories: none
Main specifications: Gradation cast iron matte black finish diameter 60 x height 45 mm weight 800 g/piece plate/diameter 35 x height 5 mm
*Set of 3 A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as scratches (Daiki Goto)
Accessories: none
Main specifications: Gradation cast iron matte black finish diameter 60 x height 45 mm weight 800 g/piece plate/diameter 35 x height 5 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
The disposal price has been reduced. Member discounts are not applicable. 2024/7/11 sales price 10,000 yen. This is a phase plug for the B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. The degree is generally good (Takasaki Atsushi)
Accessories: none
Main specifications: 227g/piece
※1 sheet only. Basically, it has a wooden structure and contains iron ball sand. The 5.5 kg heavyweight effect of iron ball sand brings out the full performance of speakers and small audio devices. There is a crease on the decorative board. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: hybrid audio board, load capacity approx. 100 kg, W300 x H44 x D 400 mm, weight 5.5 kg
AC line conditioner with greatly improved performance by adopting an L-shaped inlet specification nanocrystalline core. By attaching it between the inlet part of the device and the power cable, it is possible to easily improve sound quality, and can also be used with computers and peripheral devices. (GOTO Daiki)
Accessories: none
Main specifications: Enclosure section 50 x 40 x 70 mm ※ Cannot be used with devices that consume more than 750W of power.
AC line conditioner with greatly improved performance by adopting a nanocrystalline core. By attaching it between the inlet part of the device and the power cable, it is possible to easily improve sound quality, and can also be used with computers and peripheral devices. (GOTO Daiki)
Accessories: none
Main specifications: Enclosure section 50 x 40 x 70 mm ※ Cannot be used with devices that consume more than 750W of power.
AC line conditioner with greatly improved performance by adopting a nanocrystalline core. By attaching it between the inlet part of the device and the power cable, it is possible to easily improve sound quality, and can also be used with computers and peripheral devices. (GOTO Daiki)
Accessories: none
Main specifications: Enclosure section 50 x 40 x 70 mm ※ Cannot be used with devices that consume more than 750W of power.
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Hamilex (Hayami Kosan) pedestal speaker stand. The direction of the top plate can be changed to vertical/horizontal orientation according to the speaker, and the mounting direction of the struts can also be changed according to the atmosphere of the speaker to be installed. (Fujisawa Yukishi)
Accessories: Instruction manual
Main specifications: Total load capacity 50 kg (1 unit) W350 × D320 × H400 mm Approx. 5.8 kg/unit
Self-made cabinet for GARRARD 301 with double arm specifications. The 3012 Series 2 and SMG-212 were mounted on the tone arm installation port. You can see the appearance, peeling veneer, abrasions, bruises, etc., and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W760 x H265 x D520 mm 14.4 kg (actual measurement)
It is a wooden board that pursues natural sound. Using laminated maple wood, it gives off a natural, warm and delicate feeling. Scratches are conspicuous (Daiki Goto)
Accessories: none
Main specifications: W480 x H35 x D400 mm 3.8 kg (actual measurement)
The price has been reduced. 2024.7.14 sales price 10,000 yen screwdriver, how to use it is unknown. This item was previously purchased together with the WE555, but I don't know if it is compatible with the 555. Please judge from the measurements. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Triangular base type universal speaker stand It is convenient that the height can be adjusted in 5 levels from 93 cm to 115 cm. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: spikes
Main specifications: top plate 230 x 230 mm body W445 x H930 to 1150 x D390 mm 3.8 kg (actual measurement)
Set of 4 Spike insulators made of carbon material. The exterior of the MK3 type, which has a darker sound, has dullness and threads (Mizusaki Ryo)
Accessories: none
Main specifications: diameter 40mm height 25mm
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
Comes with original box! It is an insulator with an integrated structure. Since the spike can lift the cup and move simultaneously when the system is lifted, safe and smart vibration countermeasures are possible. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Accessories: original box instruction manual ※ hex wrench not included
Main specifications: spike dimensions 8 x length 32 mm insulator diameter 30 x height 15 mm
Speaker stand for DS-900EX. Compatible with a wide range of domestic 3-way speakers of the same size. The all-solid wood is natural, and stable sound quality can be obtained without being too hard. The cork is torn and there is a scratch (Sasaki Shota)
Accessories: none
Main specifications: Speaker stand W360 x H210 x D285 7 kg
Set of 8 gradation cast iron insulators. In addition to setting up small speakers, etc., it can be used in a wide range of ways, such as when setting AV devices in places where resonance is easy, such as on a shelf. There are scratches on the exterior (Yonejima Satoshi)
Accessories: original box
Key Specifications: Gradation cast iron, matte black finish, diameter 50 x H20 mm, weight 250 g per piece
Comes with original box! It is an insulator with an integrated structure. Since the spike can lift the cup and move simultaneously when the system is lifted, safe and smart vibration countermeasures are possible. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Accessories: original box instruction manual ※ hex wrench not included
Main specifications: spike dimensions 8 x length 32 mm insulator diameter 30 x height 15 mm
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
Tawk's thin audio board. Sandwich structure with high density wood board, surface material, and back surface material centered around a honeycomb core containing cast iron powder. It is a heavy board that combines high rigidity, high specific gravity, and high vibration damping properties, and suppresses floor softness. “W” type with warm, soft sound quality. The exterior has scratches, dents, cracks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: W495 x H26 x D445 mm 6 kg
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
The disposal price has been reduced. Member prices are not applicable. 2022/10/1 sales price 20,000 yen arm base with unknown details. It is similar to a micro A-1201, etc., but the diameter of the hole is about 19 mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
A large self-made audio board with a sturdy wooden board sandwiched between a floor mat and felt. It was created by the previous owner for TANNOY Westminster. As for the exterior, there is a feeling of use such as scratches on the bottom (Tamai Jun)
Accessories: none
Main specifications: size W1040 x D700 x H23 mm weight 8.0 kg
British Ixos speaker selector. You can switch between 4 pairs of speakers. It is a circuit configuration that prevents a decrease in impedance by combining parallel and series. There are line wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.8.15 continuity confirmed
Accessories: none
Main specifications: W179 x H68 x D133 mm approx. 0.8 kg
The price has been reduced. 2024/5/22 sales price 12,000 yen. ※It is unclear whether it is a genuine product. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
L-507 wood cabinet If you are looking for one, why don't you do it (Daiki Goto)
Accessories: none
Main specifications: W450 x H160 x D268 mm, weight 2.1 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/8/4 sales price 15,000 yen. A wood cabinet that can be used with Marantz amplifiers from around the superscope era. Secure it to the 4 corners of the front panel with 391 mm wide and 145 mm high with wood screws. There are deformation in the exterior and upper net, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: W453 x H178 x D262 mm 2.0 kg
The price has been reduced! 2024/5/19 sales price 14800 yen YAMAHA speaker stand. The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit